#:CoLo:# # Example configuration file for CoLo, version 1.16 or above. # # Turn on the serial port; if possible. - means to ignore the error and keep # going. Without this, execution would halt here if this command failed (e.g. # on Qube 2700; which lacks serial ports) -serial on # Mount the hard drive lcd "Mounting hda1" mount hda1 # Ask the user... which kernel? # Timeout; 50/10 seconds # # The format is: # select "Message Goes Here" TimeOut label1 [label2 ... [labelN]] # # This will set the {menu-option} variable to the entry corresponding to the # selected value, or 0 if no option is selected. select "Which Kernel?" 50 Working New # Now... jump to the line corresponding to the selection... # # Explaination of the goto command... # goto [-]numMarks -- prefixing with - means jump backwards # or # goto numMarks{b|f} -- b == jump back, f == jump forward # # Marks are indicated by a line starting with a @ symbol. # # We use this jump to set the {image-name} variable to a kernel image. # # Explaination of the var command: # var VariableName Value # goto {menu-option} # {menu-option} = 0; TimeOut or Cancel var image-name vmlinux.gz.working # Skip to the next two @ lines, start at the third @ line. goto 3f # {menu-option} = 1; "Working" selected. @var image-name vmlinux.gz.working goto 2f @var image-name vmlinux.gz.new # Load the requested image @lcd "Loading Linux" {image-name} load /{image-name} # Boot lcd "Booting..." execute root=/dev/hda5 ro console=ttyS0,115200 boot