# Using ncdfCF

## What is netCDF?

“NetCDF (Network Common Data Form) is a set of software libraries and machine-independent data formats that support the creation, access, and sharing of array-oriented scientific data. It is also a community standard for sharing scientific data.”

NetCDF is developed by UCAR/Unidata and is widely used for climate and weather data as well as for other environmental data sets. The `netcdf` library is ported to a wide variety of operating systems and platforms, from laptop computers to large mainframes. Data sets are typically large arrays with axes for longitude, latitude and time, with other axes, such as depth, added according to the nature of the data. Other types of data are also commonly found.

Importantly, “a netCDF file includes information about the data it contains”. This comes in two flavours:

- Structural metadata are part of the `netcdf` library. These describe the basic building blocks of the data set, its variables, and the dimensions of the variables and how the pieces fit together. With just this information one can read the data from the resource.
- Descriptive metadata are contained in attributes attached to the basic building blocks. They inform the user on what the building blocks represent. This includes crucial details like how dimensions in the resource map to the axes of the variables, but also more general items like the owners or producers of the data and the production history.

Both types of metadata are necessary to “understand” the netCDF resource.

### Conventions

The descriptive metadata are not defined by the `netcdf` library. To ensure interoperability, several “conventions” have been developed over the years such that users of netCDF data can correctly interpret what data developers have put in the resource. The most important of these conventions is the CF Metadata Conventions. These conventions define a large number of standards that help interpret netCDF resources.

Other common conventions are related to climate prediction data, such as CMIP-5 and CMIP-6, but these typically extend the CF Metadata Conventions.

## Using netCDF resources in R

### Low-level access

The `RNetCDF` package is developed and maintained by the same team that developed and maintains the `netcdf` library. It provides an interface to the `netcdf` library that stays very close to the API of the C library. As a result, it lacks an intuitive user experience and workflow that R users would be familiar with.

Package `ncdf4`, the most widely used package to access netCDF resources, does one better by performing the tedious task of reading the structural metadata from the resource that is needed for a basic understanding of the contents, such as dimension and variable details, but the library API concept remains with functions that fairly directly map to the `netcdf` library functions.

One would really need to understand the netCDF data model and implementation details to effectively use these packages. For instance, most data describing a dimension is stored as a variable. So to read the `dimnames()` of a dimension you’d have to call `var.get.nc()` or `ncvar_get()`. Neither package loads the attributes of the dimensions, variables and the data set (“global” variables), which is essential to understand what the dimensions and variables represent.

While both packages are very good at what they do, it is clearly not enough.

### Extending the base packages

Several packages have been developed to address some of these issues and make access to the data easier. Unfortunately, none of these packages provide a comprehensive R-style solution to accessing and interpreting netCDF resources in an intuitive way.

### ncdfCF

Package `ncdfCF` provides a high-level interface using functions and methods that are familiar to the R user. It reads the structural metadata and also the attributes upon opening the resource. In the process, the `ncdfCF` package also applies CF Metadata Conventions to interpret the data. This currently applies to:

- Groups are a feature of the newer `netcdf4` format, allowing for a directory-like structure in the netCDF resource. The specific scoping rules to find related objects distributed over multiple groups are supported.
- The axis designation. The three mechanisms to identify the axis each dimension represents are applied until an axis is determined.
- The time axis. Time is usually encoded as an offset from an origin. Using the `CFtime` package these offsets can be turned into intelligible dates and times, for all defined calendars.
- Bounds information defines the size of grid cells in data variables. When present, bounds are read and used in analyses.
- Discrete dimensions, possibly with character labels.
- Auxiliary coordinate variables which describe scalar axes and auxiliary longitude-latitude grids. The latter can be used by `ncdfCF` to automatically align data variables that are not on a Cartesian grid to a longitude-latitude grid.
- The cell measure variables are read and linked to any data variables referencing them. Cell measure variables that are external to the netCDF resource with the referring data variable can be linked to the data set and then they are immediately available to the referring data variables.
- Labels, as separate variables identified through the `coordinates` attribute of axes, are read, including when multiple sets of labels are defined for a single axis. Users can select which set of labels to make active for display, selection and processing.
- The grid_mapping variables, providing the coordinate reference system (CRS) of the data, with support for all defined objects in the latest EPSG database as well as “manual” construction of CRSs.

More details on how package `ncdfCF` implements the CF Metadata Conventions, including a feature matrix of supported sections, can be found in the “R-CF” vignette.

## Basic usage

Opening and inspecting the contents of a netCDF resource is very straightforward:

    library(ncdfCF)

    # Get a netCDF file, here hourly data for 2016-01-01 over Rwanda
    fn <- system.file("extdata", "ERA5land_Rwanda_20160101.nc", package = "ncdfCF")

    # Open the file, all metadata is read
    (ds <- open_ncdf(fn))
    #> <Dataset> ERA5land_Rwanda_20160101
    #> Resource   : /private/var/folders/gs/s0mmlczn4l7bjbmwfrrhjlt80000gn/T/RtmpaZnWh6/Rinst8a774dce041b/ncdfCF/extdata/ERA5land_Rwanda_20160101.nc
    #> Format     : offset64
    #> Collection : Generic netCDF data
    #> Conventions: CF-1.6
    #>
    #> Variables:
    #>  name long_name             units data_type axes
    #>  t2m  2 metre temperature   K     NC_DOUBLE longitude, latitude, time
    #>  pev  Potential evaporation m     NC_DOUBLE longitude, latitude, time
    #>  tp   Total precipitation   m     NC_DOUBLE longitude, latitude, time
    #>
    #> Attributes:
    #>  name        type    length value
    #>  Conventions NC_CHAR  6     CF-1.6
    #>  history     NC_CHAR 34     Attributes simplified for example.

    # Variables can be accessed through standard list-type extraction syntax
    (t2m <- ds[["t2m"]])
    #> <Variable> t2m
    #> Long name: 2 metre temperature
    #>
    #> Values: (not loaded)
    #>
    #> Axes:
    #>  axis name      length values
    #>  X    longitude 31     [28 ... 31]
    #>  Y    latitude  21     [-1 ... -3]
    #>  T    time      24-U   [2016-01-01T00:00:00 ... 2016-01-01T23:00:00]
    #>  unit
    #>  degrees_east
    #>  degrees_north
    #>  hours since 1900-01-01 00:00:00.0
    #>
    #> Attributes:
    #>  name      type    length value
    #>  long_name NC_CHAR 19     2 metre temperature
    #>  units     NC_CHAR  1     K

    # Same with axes, but now without first assigning the object to a symbol
    ds[["longitude"]]
    #> <Longitude axis> [1] longitude
    #> Length     : 31
    #> Axis       : X
    #> Coordinates: 28, 28.1, 28.2 ... 30.8, 30.9, 31 (degrees_east)
    #> Bounds     : (not set)
    #>
    #> Attributes:
    #>  name          type     length value
    #>  standard_name NC_CHAR   9     longitude
    #>  long_name     NC_CHAR   9     longitude
    #>  units         NC_CHAR  12     degrees_east
    #>  axis          NC_CHAR   1     X
    #>  actual_range  NC_FLOAT  2     28, 31

    # Regular base R operations simplify life further
    dimnames(ds[["pev"]]) # A data variable: list of axis names
    #> [1] "longitude" "latitude"  "time"

    dimnames(ds[["longitude"]]) # An axis: vector of axis coordinate values
    #>  [1] 28.0 28.1 28.2 28.3 28.4 28.5 28.6 28.7 28.8 28.9 29.0 29.1 29.2 29.3 29.4
    #> [16] 29.5 29.6 29.7 29.8 29.9 30.0 30.1 30.2 30.3 30.4 30.5 30.6 30.7 30.8 30.9
    #> [31] 31.0

    # Access attributes
    ds[["pev"]]$attribute("long_name")
    #> [1] "Potential evaporation"

In the last command you noted the list-like syntax with the `$` operator. The base objects in the package are based on the `R6` object-oriented model. `R6` is a light-weight but powerful and efficient framework to build object models. Access to the public fields and functions is provided through the `$` operator. Common base R operators and functions, such as shown above, are supported to facilitate integration of `ncdfCF` in frameworks built on base R or S3.

## Extracting data

One of the perpetual headaches of users of netCDF files is to extract the data. If you want to get all the data for a variable then neither `RNetCDF` nor `ncdf4` are particularly troublesome:

    library(ncdf4)
    nc <- nc_open(fn)
    vars <- names(nc$var)
    d <- ncvar_get(nc, vars[[1]])

But what if you are interested in only a small area or a month of data while the resource has global data spanning multiple years? In both `RNetCDF` and `ncdf4` packages you’d have to work out how your real-world boundaries translate to indices into the variable array of interest and then populate `start` and `count` arguments to pass on to `var.get.nc()` or `ncvar_get()`. That may be feasible for longitude and latitude axes, but for a time axis this becomes more complicated (reading and parsing the “units” attribute of the axis) or nigh-on impossible when non-standard calendars are used for the axis. Many R users default to simply reading the entire array and then extracting the area of interest using standard R tools. That is wasteful at best (lots of I/O, RAM usage, CPU cycles) and practically impossible with some larger netCDF resources that have variables upwards of 1GB in size.

Enter `ncdfCF`. With `ncdfCF` you have several options to extract data for a variable:

- `[]`: Using R’s standard extraction operator `[` you work directly with the index values into the array dimensions: `d <- t2m[3:5, 1:4, 1:10]`. You can leave out dimensions to extract everything from that dimension (but you have to indicate the position, just like in regular arrays). So to get the first 5 “time” slices from `t2m`: `d <- t2m[, , 1:5]`. This works for any number of dimensions, you simply have to adjust the number of positions that you specify, including any degenerate dimensions. Effectively, you need to indicate as many positions as the data variable has axes. You still need to know the indices into the arrays but `ncdfCF` has some helper functions to get you those. Not specifying anything gets you the whole array: `d <- t2m[]`.
- `raw()`: This also gets the data in the layout of the file (or the data set) but with dimnames set. Importantly, you can call this after calling `subset()` and you will get the raw data for the specific spatial and temporal domain that you are interested in.
- `array()`: Like `raw()`, this extracts all the (subsetted) data, but now the data will be oriented in the standard R way of column-major order. Y coordinates will run from the top to the bottom (so latitude values, for instance, will be decreasing).

    # Extract a time series for a specific location
    # As can be seen above, the `t2m` data variable has 3 axes
    ts <- t2m[5, 4, ]
    str(ts)
    #>  num [1, 1, 1:24] 293 292 292 291 291 ...
    #>  - attr(*, "dimnames")=List of 3
    #>   ..$ longitude: chr "28.4"
    #>   ..$ latitude : chr "-1.3"
    #>   ..$ time     : chr [1:24] "2016-01-01T00:00:00" "2016-01-01T01:00:00" "2016-01-01T02:00:00" "2016-01-01T03:00:00" ...
    #>  - attr(*, "axis")= Named chr [1:3] "X" "Y" "T"
    #>   ..- attr(*, "names")= chr [1:3] "longitude" "latitude" "time"
    #>  - attr(*, "time")=List of 1
    #>   ..$ time:CFTime with origin [hours since 1900-01-01 00:00:00.0] using calendar [standard] having 24 offset values

    # Extract the full spatial extent for one time step
    ts <- t2m[, , 12]
    str(ts)
    #>  num [1:31, 1:21, 1] 300 300 300 300 300 ...
    #>  - attr(*, "dimnames")=List of 3
    #>   ..$ longitude: chr [1:31] "28" "28.1" "28.200001" "28.299999" ...
    #>   ..$ latitude : chr [1:21] "-1" "-1.1" "-1.2" "-1.3" ...
    #>   ..$ time     : chr "2016-01-01T11:00:00"
    #>  - attr(*, "axis")= Named chr [1:3] "X" "Y" "T"
    #>   ..- attr(*, "names")= chr [1:3] "longitude" "latitude" "time"
    #>  - attr(*, "time")=List of 1
    #>   ..$ time:CFTime with origin [hours since 1900-01-01 00:00:00.0] using calendar [standard] having 1 offset values

Note that the results contain degenerate dimensions (of length 1). This by design because it allows attributes to be attached and then inspected by the user in a consistent manner.

With the below `CFVariable` methods you have more control over what to extract, possibly processed:

- `subset()`: The `subset()` method is more flexible than `[]` because it requires less knowledge of how the data in the variable is structured, particularly the order of the axes. While many netCDF resources “behave” in their dimension order, there is no guarantee. With `subset()` you supply each axis you want to subset (by axis orientation or name, in any order) and each item containing a vector of real-world coordinates to extract. As an example, to extract values of a variable `x` for Australia for the year 2020 you call `x$subset(X = 112:154, Y = -9:-44, T = "2020")`. The result is returned as a new `CFVariable` object.
- `summarise()`: The `summarise()` method summarises the temporal dimension of a data variable to a lower resolution and returns a `CFVariable` object with the results. For instance, you can summarise daily data to monthly summaries, which greatly reduces the size of the data variable. The periods to which data can be summarised are “day”, “dekad” (10-day periods), “month”, “quarter” (i.e. JFM, AMJ, JAS, OND), “season” (the meteorological seasons: DJF, MAM, JJA, SON), and “year”. The function to summarise on is user-supplied and can be a simple built-in function, like `mean()`, a function that results multiple results, like `range()`, or a custom function. A new `CFVariable` instance is returned for every result returned from the function.
- `profile()`: Extract “profiles” from the data variable. This can take different forms, such as a temporal or depth profile for a single location, but it could also be a zonal field (such as a transect in latitude - atmospheric depth for a given longitude) or some other profile in the physical space of the data variable.

### Subsetting by axis range

    # Extract a specific region, full time dimension
    (ts <- t2m$subset(X = 29:30, Y = -1:-2))
    #> <Variable> t2m
    #> Long name: 2 metre temperature
    #>
    #> Values: (not loaded)
    #>
    #> Axes:
    #>  axis name      length values
    #>  X    longitude 11     [29 ... 30]
    #>  Y    latitude  11     [-1 ... -2]
    #>  T    time      24-U   [2016-01-01T00:00:00 ... 2016-01-01T23:00:00]
    #>  unit
    #>  degrees_east
    #>  degrees_north
    #>  hours since 1900-01-01 00:00:00.0
    #>
    #> Attributes:
    #>  name      type    length value
    #>  long_name NC_CHAR 19     2 metre temperature
    #>  units     NC_CHAR  1     K

    # Extract specific time slices for a specific region
    # Note that the axes are specified out of order and using alternative
    # specifications: only the extreme values are used.
    (ts <- t2m$subset(T = c("2016-01-01 09:00", "2016-01-01 15:00"),
                      X = c(29.6, 28.8),
                      Y = seq(-2, -1, by = 0.05)))
    #> <Variable> t2m
    #> Long name: 2 metre temperature
    #>
    #> Values: (not loaded)
    #>
    #> Axes:
    #>  axis name      length values
    #>  X    longitude 7      [28.9 ... 29.5]
    #>  Y    latitude  11     [-1 ... -2]
    #>  T    time      6-U    [2016-01-01T09:00:00 ... 2016-01-01T14:00:00]
    #>  unit
    #>  degrees_east
    #>  degrees_north
    #>  hours since 1900-01-01 00:00:00.0
    #>
    #> Attributes:
    #>  name      type    length value
    #>  long_name NC_CHAR 19     2 metre temperature
    #>  units     NC_CHAR  1     K

### Make a profile of data

It is often useful to extract a “profile” of data for a given location or zone, such as a timeseries of data. The `CFVariable$profile()` method has some flexible options to support this:

- Profile specific locations, with multiple locations specified per call, returning the data as a (set of) `CFVariable` instance(s) or as a single `data.table`.
- Profile zones, such as a latitude band or an atmospheric level. Data is returned as (a) new `CFVariable` instance(s).

In all cases, you can profile over any of the axes and over any number of axes.

Note that the `profile()` method returns data for the grid cells closest to the specified location. That is different from the `subset()` method, which will return data as it is recorded in the netCDF resource.

    rwa <- t2m$profile(longitude = c(30.07, 30.07, 29.74), latitude = c(-1.94, -1.58, -2.60),
                       .names = c("Kigali", "Byumba", "Butare"), .as_table = TRUE)
    head(rwa)
    #>    longitude latitude                time .variable   .value
    #>        <num>    <num>              <char>    <char>    <num>
    #> 1:     30.07    -1.94 2016-01-01T00:00:00    Kigali 290.4055
    #> 2:     30.07    -1.94 2016-01-01T01:00:00    Kigali 290.0088
    #> 3:     30.07    -1.94 2016-01-01T02:00:00    Kigali 289.3608
    #> 4:     30.07    -1.94 2016-01-01T03:00:00    Kigali 288.8414
    #> 5:     30.07    -1.94 2016-01-01T04:00:00    Kigali 288.4713
    #> 6:     30.07    -1.94 2016-01-01T05:00:00    Kigali 289.9276
    attr(rwa, "value")
    #> $name
    #> [1] "2 metre temperature"
    #>
    #> $units
    #> [1] "K"

Some critical metadata is recorded in the “value” attribute: original long name and the physical unit.

When you provide coordinates for all axes but one, you get a profile of values along the remaining axis, as shown above. If you provide fewer axis coordinates you get progressively higher-order results. To get a latitudinal transect, for instance, provide only a longitude coordinate:

    (trans29_74 <- t2m$profile(longitude = 29.74, .names = "lon_29_74"))
    #> <Variable> lon_29_74
    #> Long name: 2 metre temperature
    #>
    #> Values: [286.5394 ... 298.963] K
    #>     NA: 0 (0.0%)
    #>
    #> Axes:
    #>  axis name      length values
    #>  X    longitude 1      [29.74]
    #>  Y    latitude  21     [-1 ... -3]
    #>  T    time      24-U   [2016-01-01T00:00:00 ... 2016-01-01T23:00:00]
    #>  unit
    #>  degrees_east
    #>  degrees_north
    #>  hours since 1900-01-01 00:00:00.0
    #>
    #> Attributes:
    #>  name         type      length value
    #>  long_name    NC_CHAR   19     2 metre temperature
    #>  units        NC_CHAR    1     K
    #>  actual_range NC_DOUBLE  2     286.539447, 298.96298

Note that there is only a single longitude coordinate left, at exactly the specified longitude.

### Summarising data over time

With the `summarise()` method you can apply a function over the data to generate summaries. You could, for instance, summarise daily data to monthly means. These methods use the specific calendar of the “time” axis. The return value is a new `CFVariable` object.

    # Summarising hourly temperature data to calculate the daily maximum temperature
    t2m$summarise("tmax", max, "day")
    #> <Variable> tmax
    #> Long name: 2 metre temperature
    #>
    #> Values: [290.0364 ... 302.0447] K
    #>     NA: 0 (0.0%)
    #>
    #> Axes:
    #>  axis name      length values                unit
    #>  T    time       1     [2016-01-01T12:00:00] hours since 1900-01-01 00:00:00.0
    #>  X    longitude 31     [28 ... 31]           degrees_east
    #>  Y    latitude  21     [-1 ... -3]           degrees_north
    #>
    #> Attributes:
    #>  name         type      length value
    #>  long_name    NC_CHAR   19     2 metre temperature
    #>  units        NC_CHAR    1     K
    #>  actual_range NC_DOUBLE  2     290.036358, 302.04472

A function may also return a vector of multiple values, in which case a list is returned with a new `CFVariable` object for each return value of the function. This allows you to calculate multiple results with a single call. You could write your own function to tailor the calculations to your needs. Rather than just calculating the daily maximum, you could get the daily maximum, minimum and diurnal range in one go:

    # Function to calculate multiple daily stats
    # It is good practice to include a `na.rm` argument in all your functions
    daily_stats <- function(x, na.rm = TRUE) {
      # x is the vector of values for one day
      minmax <- range(x, na.rm = na.rm)
      diurnal <- minmax[2L] - minmax[1L]
      c(minmax, diurnal)
    }

    # Call summarise() with your own function
    # The `name` argument should have as many names as the function returns results
    (stats <- t2m$summarise(c("tmin", "tmax", "diurnal_range"), daily_stats, "day"))
    #> $tmin
    #> <Variable> tmin
    #> Long name: 2 metre temperature
    #>
    #> Values: [283.0182 ... 293.8659] K
    #>     NA: 0 (0.0%)
    #>
    #> Axes:
    #>  axis name      length values                unit
    #>  T    time       1     [2016-01-01T12:00:00] hours since 1900-01-01 00:00:00.0
    #>  X    longitude 31     [28 ... 31]           degrees_east
    #>  Y    latitude  21     [-1 ... -3]           degrees_north
    #>
    #> Attributes:
    #>  name         type      length value
    #>  long_name    NC_CHAR   19     2 metre temperature
    #>  units        NC_CHAR    1     K
    #>  actual_range NC_DOUBLE  2     283.018168, 293.865857
    #>
    #> $tmax
    #> <Variable> tmax
    #> Long name: 2 metre temperature
    #>
    #> Values: [290.0364 ... 302.0447] K
    #>     NA: 0 (0.0%)
    #>
    #> Axes:
    #>  axis name      length values                unit
    #>  T    time       1     [2016-01-01T12:00:00] hours since 1900-01-01 00:00:00.0
    #>  X    longitude 31     [28 ... 31]           degrees_east
    #>  Y    latitude  21     [-1 ... -3]           degrees_north
    #>
    #> Attributes:
    #>  name         type      length value
    #>  long_name    NC_CHAR   19     2 metre temperature
    #>  units        NC_CHAR    1     K
    #>  actual_range NC_DOUBLE  2     290.036358, 302.04472
    #>
    #> $diurnal_range
    #> <Variable> diurnal_range
    #> Long name: 2 metre temperature
    #>
    #> Values: [1.819982 ... 11.27369] K
    #>     NA: 0 (0.0%)
    #>
    #> Axes:
    #>  axis name      length values                unit
    #>  T    time       1     [2016-01-01T12:00:00] hours since 1900-01-01 00:00:00.0
    #>  X    longitude 31     [28 ... 31]           degrees_east
    #>  Y    latitude  21     [-1 ... -3]           degrees_north
    #>
    #> Attributes:
    #>  name         type      length value
    #>  long_name    NC_CHAR   19     2 metre temperature
    #>  units        NC_CHAR    1     K
    #>  actual_range NC_DOUBLE  2     1.819982, 11.27369

Note that you may have to update some attributes after calling `summarise()`. You can use the `set_attribute()` method on the `CFVariable` objects to do that. Data loading is lazy. In the examples above, you can see that data did not yet get loaded. This is intentional: you can subset your data in multiple ways before actually reading the data from the resource. This is particularly important when getting data from an online location, such as a remote THREDDS server. When you want to get a hold of the raw data in an R array, use `CFVariable$raw()` or `CFvariable$array()` to get the array with `dimnames` set.

All of the above methods will read data from the netCDF resource, but only as much as is requested. The approaches lend themselves well to the `apply()` family of functions for processing. Importantly, these functions give access to data from the netCDF resource so you can tweak the size of your request to the capacity of the computer, without exhausting RAM.

## Working with the data

### Processing data

When working with netCDF data, you usually want to manipulate the data to implement a certain analysis. The basic R functions can operate directly on the `CFVariable` instance, returning a new `CFVariable` instance for further processing (more specifically: the functions in the S3 Ops and Math generic groups). Returning to the previous example, the temperature in units of Kelvin can be converted to degrees Celsius in the usual way:

    tsC <- ts - 273.15
    tsC$set_attribute("units", "NC_CHAR", "degrees_Celsius")
    tsC
    #> <Variable> t2m_273_15
    #>
    #> Values: [15.08352 ... 28.05806] degrees_Celsius
    #>     NA: 0 (0.0%)
    #>
    #> Axes:
    #>  axis name      length values
    #>  X    longitude 7      [28.9 ... 29.5]
    #>  Y    latitude  11     [-1 ... -2]
    #>  T    time      6-U    [2016-01-01T09:00:00 ... 2016-01-01T14:00:00]
    #>  unit
    #>  degrees_east
    #>  degrees_north
    #>  hours since 1900-01-01 00:00:00.0
    #>
    #> Attributes:
    #>  name         type      length value
    #>  actual_range NC_DOUBLE  2     15.083524, 28.058061
    #>  units        NC_CHAR   15     degrees_Celsius

You can also apply logical and comparison operators:

    # This produces a "logical" CFVariable: all values are 0 (FALSE) or 1 (TRUE)
    tsHot <- tsC > 20
    tsHot$set_attribute("units", "NC_CHAR", "1")
    tsHot
    #> <Variable> t2m_273_15_20
    #>
    #> Values: [0 ... 1] 1
    #>     NA: 0 (0.0%)
    #>
    #> Axes:
    #>  axis name      length values
    #>  X    longitude 7      [28.9 ... 29.5]
    #>  Y    latitude  11     [-1 ... -2]
    #>  T    time      6-U    [2016-01-01T09:00:00 ... 2016-01-01T14:00:00]
    #>  unit
    #>  degrees_east
    #>  degrees_north
    #>  hours since 1900-01-01 00:00:00.0
    #>
    #> Attributes:
    #>  name         type     length value
    #>  actual_range NC_SHORT 2      0, 1
    #>  units        NC_CHAR  1      1

It is also possible to chain operations and functions together. The above two statements could also be executed as `tsHot <- (ts - 273.15) > 20`.

After processing `CFVariable` data like this, you should update the attributes of the final result, as was done with the “units” attribute in the examples above. The “name” attribute will have a value that somewhat creatively describes the process chain (look at the example of `tsHot`) but you likely have a better description (like, `tsHot$name <- "toasty_places"`).

### Orienting the data

The `CFVariable` instance lets you manipulate the data in a way that is informed by the metadata. This overcomes a typical issue when working with netCDF data that adheres to the CF Metadata Conventions. The ordering of the axes in a typical netCDF resource is different from the way that R orders its data. That leads to surprising results if you are not aware of this issue.

    # Open a file and read the data from a variable into a CFVariable instance
    fn <- system.file("extdata", "tasmax_NAM-44_day_20410701-vncdfCF.nc", package = "ncdfCF")
    ds <- open_ncdf(fn)
    tx <- ds[["tasmax"]]

    # Get the raw data as an R array
    tx_raw <- tx$raw()
    str(tx_raw)
    #>  num [1:148, 1:140, 1, 1] 301 301 301 301 301 ...
    #>  - attr(*, "dimnames")=List of 4
    #>   ..$ x     : chr [1:148] "0" "50000" "1e+05" "150000" ...
    #>   ..$ y     : chr [1:140] "0" "50000" "1e+05" "150000" ...
    #>   ..$ time  : chr "2041-07-01T12:00:00"
    #>   ..$ height: chr "2"

The data is stored differently in the netCDF resource than usually in R: the first dimension is for `x` coordinates, followed by `y` coordinates in increasing order (meaning going from the bottom to the top), followed by two degenerate dimensions. This happens to be a common arrangement in netCDF data. There is, however, not a single way of storing data in a netCDF resources, the dimensions may be stored in any order. The CF Metadata Conventions add metadata to interpret the file storage. The `array()` method uses that to produce an array in the familiar R storage arrangement:

    tx_array <- tx$array()
    str(tx_array)
    #>  num [1:140, 1:148, 1, 1] 277 277 277 277 277 ...
    #>  - attr(*, "dimnames")=List of 4
    #>   ..$ y     : chr [1:140] "6950000" "6900000" "6850000" "6800000" ...
    #>   ..$ x     : chr [1:148] "0" "50000" "1e+05" "150000" ...
    #>   ..$ height: chr "2"
    #>   ..$ time  : chr "2041-07-01T12:00:00"

The data has been oriented in the familiar R way: from the top-left down and then across. Behind the scenes that may have involved transposing and flipping the data, depending on the data storage arrangement in the netCDF resource.

## Plotting netCDF data

Package `ncdfCF` includes the function `geom_ncdf()` which can be used to compose maps with `ggplot2`:

    library(ggplot2)
    ggplot() + geom_ncdf(data = tx) + coord_equal() + scale_fill_viridis_c()

It is advisable to subset or summarize the data variable to exactly the data you want to map to avoid exhausting your computer resources.

You can further compose this map as you would with any `ggplot2` map composition: set sizes, labels, ticks, title, modify the legend, etc.

## Saving and exporting data

A `CFVariable` object can be saved to a netCDF file. The object will have all its relevant attributes and properties written together with the actual data: axes, bounds, attributes, CRS. The netCDF file is of version “netcdf4” and will have the axes oriented in such a way that the file has maximum portability (specifically, data will be stored in row-major order with increasing Y values).

    # Save a CFVariable instance to a netCDF file on disk
    stats[["diurnal_range"]]$save("~/path/file.nc")

A `CFVariable` object can also be exported to a `data.table` or to a `terra::SpatRaster` (3D) or `terra::SpatRasterDataset` (4D) for further processing. Obviously, these packages need to be installed to utilise these methods.

    # install.packages("data.table")
    library(data.table)
    head(dt <- ts$data.table())
    #>    longitude latitude                time      t2m
    #>        <num>    <num>              <char>    <num>
    #> 1:      28.9       -1 2016-01-01T09:00:00 295.7120
    #> 2:      29.0       -1 2016-01-01T09:00:00 296.1809
    #> 3:      29.1       -1 2016-01-01T09:00:00 297.6046
    #> 4:      29.2       -1 2016-01-01T09:00:00 298.8195
    #> 5:      29.3       -1 2016-01-01T09:00:00 300.1376
    #> 6:      29.4       -1 2016-01-01T09:00:00 300.8583

    #install.packages("terra")
    suppressMessages(library(terra))
    (r <- stats[["diurnal_range"]]$terra())
    #> class       : SpatRaster
    #> size        : 21, 31, 1  (nrow, ncol, nlyr)
    #> resolution  : 0.1, 0.1  (x, y)
    #> extent      : 27.95, 31.05, -3.05, -0.95  (xmin, xmax, ymin, ymax)
    #> coord. ref. :
    #> source(s)   : memory
    #> name        : 2016-01-01T12:00:00
    #> min value   :            1.819982
    #> max value   :           11.273690

A `stars` object can be created from a `CFVariable` or a `CFDataset` with multiple variables with the function `stars::st_as_stars()`.

    suppressMessages(library(stars))
    (st <- st_as_stars(ts))
    #> stars object with 3 dimensions and 1 attribute
    #> attribute(s):
    #>             Min.  1st Qu.   Median     Mean  3rd Qu.     Max.
    #> t2m [K] 288.2335 293.2838 294.7573 294.9324 296.6282 301.2081
    #> dimension(s):
    #>           from to                  offset   delta    refsys x/y
    #> longitude    1  7                   28.85     0.1 OGC:CRS84 [x]
    #> latitude     1 11                   -0.95    -0.1 OGC:CRS84 [y]
    #> time         1  6 2016-01-01 09:00:00 UTC 1 hours   POSIXct