Require is a single package that combines features of base::install.packages, base::library, base::require, as well as pak::pkg_install, remotes::install_github, and versions::install_version, plus the snapshotting capabilities of renv. It takes its name from the idea that a user could simply have one line named from the require function that would load a package, but in this case it will also install the package if necessary. Set it and forget it. This means that even if a user has a dependency that is removed from CRAN (“archived”), the line will still work. Because it can be done in one line, it becomes relatively easy to share, which facilitates, for example, making reprexes for debugging. This package can be a key part of a reproducible workflow.

Principles used in `Require`

Require is designed with features that facilitate running R code that is part of a continuous reproducible workflow, from data-to-decisions. For this to work, all functions called by a user should have a property whereby the initial time they are called does the heavy work, and the subsequent times are sufficiently fast that the user is not forced to skip over lines of code when re-running code. This is called “rerun-tolerance”, i.e., the line can be rerun under identical conditions and very quickly return the original result. The package, reproducible, has a function Cache which can convert many function calls to have this property. It does not work well for functions whose objectives are side-effects, like installing and loading packages. Require fills this gap.

Key features

Features include:

Fast, parallel installs and downloads.
Installs CRAN and CRAN-alike even if they have been archived..
Installs GitHub packages.
User can specify which version to install using the standard R-version approach (e.g., ==3.5.0 or >=3.5.0).
Local package caching and cloning (see below) for fast (re-)installs.
Manages (some types of) conflicting package requests, i.e., different GitHub branches.
options-level control of which packages should be installed from source (see RequireOptions()) even if they are being downloaded from a binary repository.
Finds specific versions of packages from an incomplete CRAN-like repository (such as r-universe.dev), even when the version is not available, but it is available on the main CRAN mirrors.
Handles some errors that are not handled by install.packages like “already in use”.

How it works

Require uses install.packages internally to install packages. However, it does not let install.packages download the packages. Rather, it identifies dependencies recursively, finds out where they are (CRAN, GitHub, Archives, Local), downloads them (or gets from local cache or clones from an specified package library). If libcurl is available (assessed via capabilities("libcurl")), it will download them in parallel from CRAN-like repositories. If sys is installed, it will download GitHub packages in parallel also. If a user has not set options("Ncpus") manually, then it will set that to a value up to 8 for parallel installs of binary and source packages.

Rerun-tolerance

To be functionally reproducible, code must be regularly run and tested on many operating systems and computers. When this does not happen, a user/developer does not know that certain code chunks no longer work until they try to run it later. In other words, code gets stale because underlying algorithms and data change. To be rerun-tolerant, a function must:

return the same result or outcome every time it is run (first, second or more times later);
be very fast after the first time; when it is not fast, users will skip running it “because we don’t need to run it again and it is slow”

Require does both of these. See below “why is it fast”.

Why these features help teams

It is common during code development to work in teams, and to be updating package code. This is beneficial whether the team is very tight, all working on exactly the same project, or looser where they only share certain components across diverse projects.

All working on same project

If the whole team is working on the same “whole” project, then it may be useful to use a “package snapshot” approach, as is used with the renv package. Require offers similar functionality with the function pkgSnapshot(). Using this approach provides a mechanism for each team member to update code, then snapshot the project, commit the snapshot and push to the cloud for the team to share.

Diverse projects

However, if a team is more diversified and they are actually sharing the new code, but not the whole project, then project snapshots will be very inefficient and package management must be on a package-by-package case, not the whole project. In other words, the code developer can work on their package, and the various team members will have 2 options of what they might want to do: keep at the bleeding edge or update only if necessary for dependencies. More likely, they will want to have a mixture of these strategies, i.e., bleeding edge with some code, but only if necessary with others. Thus, Require offers programmatic control for this. For example

library(Require)
Require::Install(
  c("PredictiveEcology/reproducible@development (HEAD)", 
    "PredictiveEcology/SpaDES.core@development (>=2.0.5.9004)"))

will keep the project at the bleeding edge of the development branch of reproducible, but will only update if necessary (based on the version needed, expressed by the inequality) for the development branch of SpaDES.core. The user does not have to make decisions at run time as to whether an update should be made, and for which packages.

How `Require` differs from other approaches

Default behaviours different

For packages that are not yet installed:

Description	Outcome
`Install("data.table")`	`data.table` installed
`install.packages("data.table")`	`data.table` installed
`pak::pkg_install("data.table")`	`data.table` installed
`renv::install("data.table")`	`data.table` installed

For packages that are installed:

Description	Outcome
`Install("data.table")`	No installation
`install.packages("data.table")`	`data.table` installed
`pak::pkg_install("data.table")`	No installation
`renv::install("data.table")`	`data.table` installed

For packages that are already installed, but not latest on CRAN:

Description	Outcome
`Install("data.table")`	No installation
`install.packages("data.table")`	`data.table` installed
`pak::pkg_install("data.table")`	`data.table` installed, asks user if wants to update if available
`renv::install("data.table")`	`data.table` installed, asks user if wants to update if available

Differences and similarities between `pak` and `Require`

This table is based on Require v1.0.0 and pak v0.7.2.

* Indicates that there is an example below.

Description	`Require`	`pak`
Parallel downloads	Yes	Yes
Parallel installs	Yes	Yes
Archived package* (e.g., `"knn"`)	Automatic	Must prefix with `url::` and exact url path
Archived package in dependency*	Automatic	May not work, even if manually adding `url::` or `any::`
Dependency conflicts*	Yes	No (see example below using `any::`)
Multiple requests of same package*	Resolves by version number specification, or most recent version	Error
Control individual package updates	With `HEAD`	No
Very clean messaging	somewhat, with `options(Require.installPackagesSys = 1)`	Yes
Package dependencies	`data.table`, `sys`	None (though yes if user wants control, e.g., `pkgcache`)
Uses local cache	Yes	Yes
Package updates (default)	No, unless needed by version number	Yes, prompt user
Package install by version	Yes	Yes, but does not deal well with multiple packages with specific versions
Package conflict (CRAN & GitHub)*	Prefers CRAN, if version requirements met	Error
Version specification by user	Yes e.g., `Require (>=1.0.0)`	Not an option
Exact version specification by user	Uses `DESCRIPTION` file approach e.g., `Require (==1.0.0)`	Uses `@` e.g., `Require@1.0.0`
Version conflicts	Require attempts to resolve them, detailing conflict	Reports “dependency conflict” without details
Cache of package dependencies	Yes (internally in `Require::pkgDep`)	No (cache not used in `pak::pkg_dep`)
`Additional_repositories` (in `DESCRIPTION` file of a package)	Uses	Does not use (like `install.packages`)
Cache of package binaries built locally from source	Yes	No (`pak` version `0.7.2`)

Archived packages

Between mid March 2024 and April 5, 2024, fastdigest was taken off CRAN. If this is part of your direct dependencies, you can remove it and find an alternative. However, if it is an indirect dependency, you don’t have that choice: your workflow will break. Require will just get the most recent archived copy and the work can continue. While fastdigest is back on CRAN, others are not, e.g., an older knn package:

Require::Install("knn")

try(pak::pkg_install(c("knn")))

Dependency conflict

When doing code development, it is common to use many GitHub packages. Each of these (or their dependencies) may point to one or more branches, either directly by user or in Remotes field. In this next example, pak errors, while Require makes decisions and installs. This is a common occurrence for teams developing packages concurrently. The pak approach suggests prepending any:: to the package(s) that is/are causing the conflict. This may suffice under some situations. The Require approach is to assume the equivalent of any:: which means to prioritize base on (in this order) 1. use package version requirements, 2. CRAN-like repositories, 3. order.

library(Require)
# Fails because of a) packages taken off CRAN & multiple GitHub branches requested within the nested dependencies
pkgs <- c("reproducible", "PredictiveEcology/SpaDES@development")
dirTmp <- tempdir2(sub = "first")
.libPaths(dirTmp)
install.packages("pak") # need this in the library; can't use personal library version
try(pak::pkg_install(pkgs))
# ✔ Loading metadata database ... done
# Error : ! error in pak subprocess                                                      
# Caused by error: 
# ! Could not solve package dependencies:
# * reproducible: dependency conflict
# * PredictiveEcology/SpaDES@development: Can't install dependency PredictiveEcology/reproducible@development (>=  2.0.10)
# * PredictiveEcology/reproducible@development: Conflicts with reproducible
pkgsAny <- c("any::reproducible", "PredictiveEcology/SpaDES@development")
try(pak::pkg_install(pkgsAny))

# Fine
dirTmp <- tempdir2(sub = "second")
.libPaths(dirTmp)
Require::Install(pkgs)

# Fails
try(pk <- pak::pak(c("PredictiveEcology/LandR@development", "PredictiveEcology/LandR@main")))
# Error : ! error in pak subprocess                                                        
# Caused by error: 
# ! Could not solve package dependencies:
# * PredictiveEcology/LandR@development: Conflicts with PredictiveEcology/LandR@main
# * PredictiveEcology/LandR@main: Conflicts with PredictiveEcology/LandR@development

# Fine -- takes in order, so main first in this example
rq <- Require::Install(c("PredictiveEcology/LandR@main", "PredictiveEcology/LandR@development"))

# Fine -- takes by version requirement, so takes development, 
#    which is the only one that fulfills requirement on Jul 25, 2024
rq <- Require::Install(c("PredictiveEcology/LandR@main", "PredictiveEcology/LandR@development (>=1.1.5)"))

The following does not work with pak because BioSIM, a dependency on GitHub is not found. This may be because the package name is not the repository name, but it is not clear from the error message why:

try(gg <- pak::pkg_deps("PredictiveEcology/LandR@development", dependencies = TRUE))
ff <- Require::pkgDep("PredictiveEcology/LandR@development", dependencies = TRUE)

Version requirements determine package installation

Version number requirements drive package updates. If a user does not need an update because version numbers are sufficient, no update will occur.
If no version number specification, then installs only occur if package is not present.
Multiple simultaneous requests to install a package from what appear to be incompatible sources, will not create a conflict unless version requirements cause the conflict. If version number requirements are not specified, CRAN versions will take precedence, and sequence of packages listed at installation will take preference otherwise.

# The following has no version specifications, 
#   so CRAN version will be installed or none installed if already installed
Require::Install(c("PredictiveEcology/reproducible@development", "reproducible"))

# The following specifies "HEAD" after the Github package name. This means the 
#   tip of the development branch of reproducible will be installed if not already installed
Require::Install(c("PredictiveEcology/reproducible@development (HEAD)", "reproducible"))

# The following specifies "HEAD" after the package name. This means the 
#   tip of the development branch of reproducible
Require::Install(c("PredictiveEcology/reproducible@development", "reproducible (HEAD)"))

# Not a problem because version number specifies
Require::Install(c("PredictiveEcology/reproducible@modsForLargeArchives (>=2.0.10.9010)",
                   "PredictiveEcology/reproducible (>= 2.0.10)"))

# Even if branch does not exist, if later version requirement specifies a different branch, no error
Require::Install(c("PredictiveEcology/reproducible@modsForLargeArchives (>=2.0.10.9010)",
                   "PredictiveEcology/reproducible@validityTest (>= 2.0.9)"))

Require can handle package version specifications at the function call (pak can handle them if they are in a DESCRIPTION file, if they are >=), whereas pak cannot (currently).

## FAILS - can't specify version requirements
try(pak::pkg_install(
    c("PredictiveEcology/reproducible@modsForLargeArchives (>=2.0.10.9010)",
      "PredictiveEcology/reproducible (>= 2.0.10)")))

Why is it fast?

Some of the features make it fast the first time being used on a system, some make it fast the second & subsequent time on a system (which can be first time in a new project). These features are caching, cloning, and parallel downloads.

Caching

Require creates a local cache of several steps: the packages files (source or binary including locally built binaries); the package dependency tree (only in RAM currently, so only affects the same session); available package matrices for CRAN-like repositories. Together, these speed up the installation of packages on a computer that can access the local cache, e.g., for each new project. Require keeps the binary once the source package is built, and it can therefore install the binary each subsequent installation. This results in dramatically faster installations of source packages after they have been built locally.

Cloning (still experimental; do not default)

Require has an option, options("Require.cloneFrom"), which, when set, will create a hard link between the current project’s package library and the library pointed to by the option. Setting to e.g. options("Require.cloneFrom" = Sys.getenv("R_LIBS_USER")) will allow packages in the user’s personal library to be the source of the “copying” to the project library. This is dramatically faster than installing, even when the installation is a local binary from the local cache.

Binary on Linux

On Linux, users have the ability to install binary packages that are pre-built e.g., from the Posit Package Manager. Sometimes the binary is incompatible with a user’s system, even though it is the correct operating system. This occurs generally for several packages, and thus they must be installed from source. Require has a function sourcePkgs(), which can be informed by options("Require.spatialPkgs") and options("Require.otherPkgs") that can be set by a user on a package-by-package basis. By default, some are automatically installed from "source" because in our experience, they tend to fail if installed from the binary.

# In this example, it is `terra` that generally needs to be installed from source on Linux
if (Require:::isUbuntuOrDebian()) {
  Require::setLinuxBinaryRepo()
  pkgs <- c("terra", "PSPclean")
  pkgFullName <- "ianmseddy/PSPclean@development"
  try(remove.packages(pkgs))
  pak::cache_delete() # make sure a locally built one is not present in the cache
  try(pak::pkg_install(pkgFullName))
  # ✔ Loading metadata database ... done                                       
  #                                                                            
  # → Will install 2 packages.
  # → Will download 2 packages with unknown size.
  # + PSPclean   0.1.4.9005 [bld][cmp][dl] (GitHub: fed9253)
  # + terra      1.7-71     [dl] + ✔ libgdal-dev, ✔ gdal-bin, ✔ libgeos-dev, ✔ libproj-dev, ✔ libsqlite3-dev
  # ✔ All system requirements are already installed.
  #   
  # ℹ Getting 2 pkgs with unknown sizes
  # ✔ Got PSPclean 0.1.4.9005 (source) (43.29 kB)                         
  # ✔ Got terra 1.7-71 (x86_64-pc-linux-gnu-ubuntu-22.04) (4.24 MB)      
  # ✔ Downloaded 2 packages (4.28 MB) in 2.9s                
  # ✔ Installed terra 1.7-71  (61ms)                                   
  # ℹ Packaging PSPclean 0.1.4.9005                                    
  # ✔ Packaged PSPclean 0.1.4.9005 (420ms)                              
  # ℹ Building PSPclean 0.1.4.9005                                      
  # ✖ Failed to build PSPclean 0.1.4.9005 (3.7s)                        
  # Error:                                                              
  # ! error in pak subprocess
  # Caused by error in `stop_task_build(state, worker)`:
  # ! Failed to build source package PSPclean.
  # Type .Last.error to see the more details.
  
  
  # Works fine because the `sourcePkgs()`            
  
  try(remove.packages(pkgs)) # uninstall to make sure it is a clean install for this test
  Require::cacheClearPackages(pkgs, ask = FALSE) # remove any existing local packages
  Require::Install(pkgFullName)
}

Package dependencies

default arguments – `pkgDep(..., which = XX)` includes `LinkingTo`

pkgDep, by default, includes LinkingTo as these are required by Rcpp if that is required, and so are strictly necessary. pak::pkg_deps does not include LinkingTo by default.

depPak <- pak::pkg_deps("PredictiveEcology/LandR@LandWeb") 
depRequire <- Require::pkgDep("PredictiveEcology/LandR@LandWeb") # Slightly different default in Require

# Same
pakDepsClean <- setdiff(Require::extractPkgName(depPak$ref), Require:::.basePkgs)
requireDepsClean <- setdiff(Require::extractPkgName(depRequire[[1]]), Require:::.basePkgs)
setdiff(pakDepsClean, requireDepsClean)
setdiff(requireDepsClean, pakDepsClean) # does not report "RcppArmadillo", "RcppEigen", "cpp11" which are LinkingTo

CRAN-preference

If there is no version specification, Require prefers CRAN packages when there are multiple pointers to a package. Thus, even though a package may have a Remotes field pointing to e.g., PredictiveEcology/SpaDES.tools@development, if there is a recursive dependency within that package that specifies SpaDES.tools without a Remotes field, then pkgDep will return the CRAN version. If a user wants to override this behaviour, then the user can specify a version requirement that can only be satisfied with the Remotes option. Then pkgDep will take that.

pak::pkg_deps prefers the top-level specification, i.e., the non-recursive Remotes field will be returned, even if the same package is also specified within a recursive dependency without a Remotes field, i.e, if a recursive dependency points the CRAN package, it will not return that version of the dependency.

`pak` fails for packages on GitHub that are not same name as Git Repo in Remotes

gg <- pak::pkg_deps("PredictiveEcology/LandR@development", dependencies = TRUE)
# Error:                                                                                  
# ! error in pak subprocess
# Caused by error: 
# ! Could not solve package dependencies:
# * PredictiveEcology/LandR@development: Can't install dependency BioSIM
# * BioSIM: Can't find package called BioSIM.
# Type .Last.error to see the more details.
ff <- Require::pkgDep("PredictiveEcology/LandR@development", dependencies = TRUE)
# $`PredictiveEcology/LandR@development`
#  [1] "BH"                                                      "BIEN"                                            
#  [3] "BioSIM"                                                  "DBI (>= 0.8)"                                 
#  [5] "Deriv"                                                   "ENMeval"                                          
#  ...

The `Require` approach, comparing `pak` and `renv`

Eliot McIntire

Principles used in `Require`

Key features

How it works

Rerun-tolerance

Why these features help teams

All working on same project

Diverse projects

How `Require` differs from other approaches

Default behaviours different

Differences and similarities between `pak` and `Require`

Archived packages

Dependency conflict

Version requirements determine package installation

Why is it fast?

Caching

Cloning (still experimental; do not default)

Binary on Linux

Package dependencies

default arguments – `pkgDep(..., which = XX)` includes `LinkingTo`

CRAN-preference

`pak` fails for packages on GitHub that are not same name as Git Repo in Remotes

`renv` and `Require`

Managing projects during development

Using `DESCRIPTION` file to maintain minimum versions

The Require approach, comparing pak and renv

Eliot McIntire

Principles used in Require

Key features

How it works

Rerun-tolerance

Why these features help teams

All working on same project

Diverse projects

How Require differs from other approaches

Default behaviours different

Differences and similarities between pak and Require

Archived packages

Dependency conflict

Version requirements determine package installation

Why is it fast?

Caching

Cloning (still experimental; do not default)

Binary on Linux

Package dependencies

default arguments – pkgDep(..., which = XX) includes LinkingTo

CRAN-preference

pak fails for packages on GitHub that are not same name as Git Repo in Remotes

renv and Require

Managing projects during development

Using DESCRIPTION file to maintain minimum versions

The `Require` approach, comparing `pak` and `renv`

Principles used in `Require`

How `Require` differs from other approaches

Differences and similarities between `pak` and `Require`

default arguments – `pkgDep(..., which = XX)` includes `LinkingTo`

`pak` fails for packages on GitHub that are not same name as Git Repo in Remotes

`renv` and `Require`

Using `DESCRIPTION` file to maintain minimum versions