
AC-SYSTEM-MIB DEFINITIONS ::= BEGIN


    IMPORTS
       

        OBJECT-TYPE, 
        MODULE-IDENTITY                             FROM SNMPv2-SMI
        TAddress, 
        DisplayString, 
        DateAndTime, TEXTUAL-CONVENTION             FROM SNMPv2-TC
        IpAddress                                   FROM RFC1155-SMI
        RowPointer				    FROM SNMPv2-TC
        Unsigned32,
		Integer32,
		Counter32,
		Gauge32,
        enterprises                                 FROM SNMPv2-SMI
		RowStatus      								FROM SNMPv2-TC
		SnmpAdminString								FROM SNMP-FRAMEWORK-MIB
		audioCodes,       
		acRegistrations,
		acGeneric, 
		acProducts,acBoardMibs						FROM AUDIOCODES-TYPES-MIB
		InetAddress, InetAddressType				FROM INET-ADDRESS-MIB;

       
acSystem  MODULE-IDENTITY       
    LAST-UPDATED "202105310433Z"          --Monday, May 31 2021
    ORGANIZATION "AudioCodes Ltd"
    CONTACT-INFO
    "Postal: Support
	     AudioCodes LTD
             1 Hayarden Street
             Airport City 
	     Lod, ISRAEL 70151
     Tel:    972-3-9764000
     Fax:    972-3-9764040
     Email:  support@audiocodes.com
     Web:    www.audiocodes.com"		

    DESCRIPTION       
    ""



    ::= {acBoardMibs 10}  








     acSystemConfiguration OBJECT IDENTIFIER ::= {acSystem 1}


     acSysControl OBJECT IDENTIFIER ::= {acSystemConfiguration 1}


     acSysControlProtocolType OBJECT-TYPE
       SYNTAX INTEGER {
                  controlProtocol-None(0)
,
                  controlProtocol-MGCP(1)
,
                  controlProtocol-MEGACO(2)
,
                  controlProtocol-H323(4)
,
                  controlProtocol-SIP(8)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Defines the control protocol type. 
Choose either:
0 = None
1 = MGCP
2 = MEGACO
4 = H.323 
8 = SIP.
Access: Offline.
AC INI-Param: MGCONTROLPROTOCOLTYPE"
       ::= {acSysControl 1}



     acSysControlTrunkingToAnalogFunctionalityProfile OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  cASAnalog(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines the Trunking to Analog Functionality
Profile. 
0 = Disable
1 = Enable MelCAS/LoopStart/GroundStart to Analog Functionality
Refer to the enumerator acTrunkingToAnalogFunctionalityProfile
enum for the possible values.
Access: Offline.
AC INI-Param: TrunkingToAnalogFunctionalityProfile"
       ::= {acSysControl 2}



     acSysTDM OBJECT IDENTIFIER ::= {acSystemConfiguration 2}


     acSysTDMClock OBJECT IDENTIFIER ::= {acSysTDM 1}


     acSysTDMClockSource OBJECT-TYPE
       SYNTAX INTEGER {
                  internal(1)
,
                  mVIP(3)
,
                  network(4)
,
                  h110-A(8)
,
                  h110-B(9)
,
                  netReference1(10)
,
                  netReference2(11)
,
                  sC-2M(12)
,
                  sC-4M(13)
,
                  sC-8M(14)
,
                  bITS(15)
,
                  network-b(16)
,
                  aTM-OC3(17)
,
                  aTM-OC3-B(18)
,
                  aTM-OC12(19)
,
                  network-DS3-1(20)
,
                  network-DS3-2(21)
,
                  network-DS3-3(22)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the clock source on which the board synchronizes.
1 = Local oscillator
3 = MVIP
4 = PSTN Network
8 = H.110A
9 = H.110B
10 = NetRef1
11 = NetRef2
12 = SC2M
13 = SC4M
14 = SC8M
15 = BITS
16 = Network-B
17 = ATM-OC3
18 = ATM-OC3-B
19 = ATM-OC12
20 = Network-DS3-1
21 = Network-DS3-2
22 = Network-DS3-3
Default = 1
TP-1610 = 3

The Paramater is online for TP6310 and TP8410 . For all other
boards, the parameter is offline.
Access: Online.
AC INI-Param: TDMBUSCLOCKSOURCE"
       ::= {acSysTDMClock 1}



     acSysTDMClockEnableFallBack OBJECT-TYPE
       SYNTAX INTEGER {
                  manual(0)
,
                  autoNon-Revertive(1)
,
                  auto-Revertive(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the auto fallback of the clock. 
Range: 
0 = Manual
1 = Auto Non-Revertive
2 = Auto Revertive.
Access: Online.
AC INI-Param: TDMBUSENABLEFALLBACK"
       ::= {acSysTDMClock 2}



     acSysTDMClockLocalReference OBJECT-TYPE
       SYNTAX Unsigned32 (0..256)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "When the clock source is set to Network, this parameter selects
the Trunk ID to be used as the clock synchronization source
of the board.
When using H.110/H.100 bus, this parameter also selects the
trunk used as the clock source for the NetRef clock generation
(in this case, the clock source must not be set to Network.
Range = 0 to (MAX_TRUNK _NUM-1).
Access: Online.
AC INI-Param: TDMBusLocalReference"
       ::= {acSysTDMClock 3}



     acSysTDMClockMasterSlaveSelection OBJECT-TYPE
       SYNTAX INTEGER {
                  acTDMBusSlaveMode(0)
,
                  acTDMBusMasterMode(1)
,
                  acH110BusSecondaryMasterMode(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets SC/MVIP/H.100/H.110 to either: 

0 = Slave mode (another board in the system must supply the
clock to the TDM bus) or Master mode (the board is the clock
source for the TDM bus) or Secondary Master mode (for H100/H110
Bus only).  
1 = H110A Master in Master mode
2 = H.110B Master.
Access: Online.
AC INI-Param: TDMBUSMASTERSLAVESELECTION"
       ::= {acSysTDMClock 4}



     acSysTDMClockNetRefSpeed OBJECT-TYPE
       SYNTAX INTEGER {
                  acTH110BusNetRefSpeed-8khz(0)
,
                  acTH110BusNetRefSpeed-1544khz(1)
,
                  acTH110BusNetRefSpeed-20488khz(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the NetRef frequency (for both generation and synchronization).
0 = 8 kHz
1 = 1.544 MHz
2 = 2.048 MHz.
Access: Online.
AC INI-Param: TDMBUSNETREFSPEED"
       ::= {acSysTDMClock 5}



     acSysTDMClockAutoFallBackEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables the PSTN trunk auto-fallback feature.
Access: Offline.
AC INI-Param: TDMBusPSTNAutoClockEnable"
       ::= {acSysTDMClock 6}



     acSysTDMClockAutoFallBackRevertingEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables/disables the PSTN trunk auto-fallback reverting feature.
Access: Offline.
AC INI-Param: TDMBusPSTNAutoClockRevertingEnable"
       ::= {acSysTDMClock 7}



     acSysTDMClockBitsReference OBJECT-TYPE
       SYNTAX Unsigned32 (1..2)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Configures the BITS clock reference when the board source clock
is set to BITS and Fallback is set to manual or non-revertive.


1 = REF_1 
2 = REF_2.
Access: Online.
AC INI-Param: TDMBITSClockReference"
       ::= {acSysTDMClock 8}



     acSysTDMClockPLLOutOfRange OBJECT-TYPE
       SYNTAX INTEGER {
                  oor-9-2to12ppm(0)
,
                  oor-40to52ppm(1)
,
                  oor-100to130ppm(2)
,
                  oor-64to83ppm(3)
,
                  oor-13-8to18ppm(4)
,
                  oor-24-6to32ppm(5)
,
                  oor-36-6to47-5ppm(6)
,
                  oor-52to67-5ppm(7)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the valid PPM range outside the Stratum 3 standard.
This parameter is only relevant for the TP8410 on the Mediant
3000. This parameter is enabled when bspTimingModuleCfgTimingMode
is set to TM_External_MODE(1).

One of the following possible values: OOR_9_2to12ppm(0),OOR_40to52ppm(1),OOR_100to130ppm(2),OOR_64to83ppm(3),OOR_13_8to18ppm(4),OOR_24_6to32ppm(5),OOR_36_6to47_5ppm(6),OOR_52to67_5ppm(7).
Access: Online.
AC INI-Param: PLLOutOfRange"
       ::= {acSysTDMClock 9}



     acSysTDMClockFallbackClock OBJECT-TYPE
       SYNTAX INTEGER {
                  network(4)
,
                  h110-A(8)
,
                  h110-B(9)
,
                  netReference1(10)
,
                  netReference2(11)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the fallback clock source on which board synchronizes
in the event of clock failure.
4 = PSTN Network
8 = H.110A
9 = H.110B
10 = NetRef1
11 = NetRef2.
Access: Online.
AC INI-Param: TDMBusFallbackClock"
       ::= {acSysTDMClock 10}



     acSysTDMBus OBJECT IDENTIFIER ::= {acSysTDM 2}


     acSysTDMBusType OBJECT-TYPE
       SYNTAX INTEGER {
                  mVIP-BUS(0)
,
                  sC-BUS(1)
,
                  uSE-FRAMERS(2)
,
                  qSLAC-BUS(3)
,
                  uSE-H110-BUS(4)
,
                  uSE-EXT-BUS(5)
,
                  aNALOG-BUS(6)
,
                  uSE-PSTN-SW-ONLY(8)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the TDM bus interface to be used (only one TDM bus interface
can be enabled at one time although more than one can
physically exist on the board).
Range:
0 = acMVIP_BUS
1 = acSC_BUS
2 = acFRAMERS
4 = acH100_BUS
5 = EXT TDM
6 = Analog
8 = SW Pstn

Default:
TP-1610 and TP-2810 = 2
 TPM-1100 = 5
 TP-260 = 1.
Access: Offline.
AC INI-Param: TDMBUSTYPE"
       ::= {acSysTDMBus 1}



     acSysTDMBusSpeed OBJECT-TYPE
       SYNTAX INTEGER {
                  acTDMBusSpeed-2Mbps(0)
,
                  acTDMBusSpeed-4Mbps(2)
,
                  acTDMBusSpeed-8Mbps(3)
,
                  acTDMBusSpeed-16Mbps(4)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the TDM bus speed according to the Bus Type as follows:

SC = 0/2/3
H.110/H.100 = 3
MVIP = 0
Where: 

0 = 2048 kbps
2 = 4096 kbps
3 = 8192 kbps
4 = 16384 kbps
Default: TP-260 = 2
 All other boards = 3.
Access: Offline.
AC INI-Param: TDMBUSSPEED"
       ::= {acSysTDMBus 2}



     acSysTDMBusOutputPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..31)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the SC/MVIP/H.100/H.110 output port to be used for the
board's channel #0. All other channels then occupy the next
timeslots sequentially.
Range:
0 to 15 for SC/MVIP
0 to 31 for H.110.
Access: Offline.
AC INI-Param: TDMBUSOUTPUTPORT"
       ::= {acSysTDMBus 3}



     acSysTDMBusOutputStartingChannel OBJECT-TYPE
       SYNTAX Unsigned32 (0..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the outgoing TDM Timeslot for board's channel #0. The
remaining channels are organized sequentially.
Access: Offline.
AC INI-Param: TDMBUSOUTPUTSTARTINGCHANNEL"
       ::= {acSysTDMBus 4}



     acSysPCM OBJECT IDENTIFIER ::= {acSysTDM 3}


     acSysPCMLawSelect OBJECT-TYPE
       SYNTAX INTEGER {
                  muLaw(3)
,
                  aLaw(1)
,
                  automatic(0)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the type of PCM companding law in input/output TDM bus
(TDM bus is defined using the TDMBusType parameter).

1 = A-law
3 = Mu-Law.
Access: Offline.
AC INI-Param: PCMLAWSELECT"
       ::= {acSysPCM 1}



     acSysPCMIdlePattern OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the PCM pattern applied to the E1/T1 timeslot (B-channel)
when the channel is idle. 
Default:
0xFF if PCMLawSelect is Mu-Law
0xD5 if PCMLawSelect is A-Law
Range = 0x00 to 0xFF.
Access: Offline.
AC INI-Param: IDLEPCMPATTERN"
       ::= {acSysPCM 2}



     acSysPCMIdleABCDPattern OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the ABCD (CAS) pattern to be applied on the signaling
bus before it is changed by the user or the PSTN protocol.
This is only relevant when using PSTN interface with CAS protocols.
Range = 0x0 to 0xF.
Access: Offline.
AC INI-Param: IDLEABCDPATTERN"
       ::= {acSysPCM 3}



     acSysPCMSerialPortAuditIntervalMin OBJECT-TYPE
       SYNTAX Unsigned32 (0..60)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Interval timeout in minutes, of the Serial Port audit. In case
of 0 value, the audit isn't running.
Access: Offline.
AC INI-Param: SerialPortAuditIntervalMin"
       ::= {acSysPCM 4}



     acSysNetworkConfig OBJECT IDENTIFIER ::= {acSystemConfiguration 3}


     acSysIP OBJECT IDENTIFIER ::= {acSysNetworkConfig 1}


     acSysIPAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Board IP Address.  In human readable form.
 in host byte order e.g. 192.10.1.2 = 0xc00a0102). 
  Users should set the subnet mask to a valid value per the
IP address.
Access: Online.
AC INI-Param: N/A"
       ::= {acSysIP 1}



     acSysIPSubNetAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Board SubNet Address.  In human readable form.
  (in host byte order e.g. 255.255.255.0 = 0xffffff00). 
  default =255.255.255.0.
Access: Online.
AC INI-Param: N/A"
       ::= {acSysIP 2}



     acSysIPDefaultGatewayAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Default Gateway Address.
 Board's Default Gateway IP address.  In human readable form.
 (in host byte order e.g. 192.10.1.255 = 0xc00a01ff).
Access: Online.
AC INI-Param: N/A"
       ::= {acSysIP 3}



     acSysIPDHCPEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Enables/disables DHCP support. 

0 = Disable
1 = Enable

After the gateway is powered up, it attempts to communicate
with a BootP server. If a BootP server does not respond and
if DHCP is enabled, the gateway attempts to obtain its IP address
and other network parameters from the DHCP server. 
Note that throughout the DHCP procedure, the BootP/TFTP application
must be deactivated. If it isnt deactivated, the gateway
receives a response from the BootP server instead of
the DHCP server. 
For additional information on DHCP, refer to the product documentation.

Note: DHCPEnable is a special Hidden parameter. Once defined
and saved in flash memory, its assigned value doesnt revert
to its default even if the parameter doesn't appear in
the INI file.
Access: Online.
AC INI-Param: DHCPEnable"
       ::= {acSysIP 4}



     acSysIPDHCPSpeedFactor OBJECT-TYPE
       SYNTAX Unsigned32 (0..10)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Controls the DHCP renewal speed. When set to 0, the DHCP lease
renewal is disabled. Otherwise, the renewal time is divided
by this factor. Some DHCP-enabled routers perform better
when set to 4.

0 = Disable DHCP 
1 = Normal 
2 to 10 = Fast.
Access: Offline.
AC INI-Param: DHCPSpeedFactor"
       ::= {acSysIP 5}



     acSysIPDnsPrimaryServerType OBJECT-TYPE
       SYNTAX INTEGER {
                  ipv4(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter defines the DNS primary server's IP address type.
Access: Offline.
AC INI-Param: N/A"
       ::= {acSysIP 6}



     acSysIPDnsPrimaryServer OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter defines the DNS primary server's IP address.
Range = Legal IP address.
Access: Offline.
AC INI-Param: DNSPriServerIP"
       ::= {acSysIP 7}



     acSysIPDnsSecondaryServerType OBJECT-TYPE
       SYNTAX INTEGER {
                  ipv4(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter defines the DNS secondary server's IP address
type.
Access: Offline.
AC INI-Param: N/A"
       ::= {acSysIP 8}



     acSysIPDnsSecondaryServer OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter defines the DNS secondary server's IP address.
Range = Legal IP address.
Access: Offline.
AC INI-Param: DNSSecServerIP"
       ::= {acSysIP 9}



     acSysIPDHCPLeaseRenewalEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Enables/disables DHCP renewal support. 
This paramater  will only take effect if DHCPEnable = 0.

After the gateway is powered up, it attempts to communicate
with a BootP server. If a BootP server does not respond and
if DHCP is disabled, the gateway will boot from flash. It will
then attempt to communicate with the DHCP server to renew
the lease. 
Note that throughout the DHCP procedure, the BootP/TFTP application
must be deactivated. If it isnt deactivated, the gateway
receives a response from the BootP server instead of
the DHCP server. 
For additional information on DHCP, refer to the product documentation.


For cases where the booting the board via DHCP is not desirable,
but renewing DHCP leasing is. if DHCPEnable = 1, this
paramater will not have any effect.
Access: Online.
AC INI-Param: EnableDHCPLeaseRenewal"
       ::= {acSysIP 10}



     acSysIPWanInterfaceName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..38))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the WAN interface name to be used by VOIP signalling applications.
see CLI documentation for interface name formats.
Access: Offline.
AC INI-Param: WanInterfaceName"
       ::= {acSysIP 11}



     acSysIPV6Address OBJECT-TYPE
       SYNTAX InetAddress
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Board IP Address.
Access: Online.
AC INI-Param: N/A"
       ::= {acSysIP 12}



     acMultipleIP OBJECT IDENTIFIER ::= {acSysIP 30}


     acMultipleIPEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Enables the multiple IPs feature. 

0 = Disable 
1 = Enable.
Access: Offline.
AC INI-Param: EnableMultipleIPs"
       ::= {acMultipleIP 1}



     acMultipleIPEnableTPNCPasOAM OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the TPNCP location on the Operation, Administration and
Management (OAM) network, when operating in multiple IPs mode.
If this parameter is set and the machine is working in multiple
IPs mode, TPNCP is located on the OAM network.

0 = TPNCP on Control network
1 = TPNCP on OAM network.
Access: Offline.
AC INI-Param: EnableTPNCPasOAM"
       ::= {acMultipleIP 2}



     acMultipleIPEnableDNSasOAM OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the location of the DNS. If this parameter is set and the
machine is functioning in multiple IPs mode, the DNS is located
on the OAM network. If not, the DNS is on the control
network.

0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: EnableDNSasOAM"
       ::= {acMultipleIP 3}



     acMultipleIPEnableNTPasOAM OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the location of the Network Time Protocol (NTP). If this
parameter is set and the machine is functioning in multiple
IPs mode, the NTP is located on the OAM network. If not, the
NTP is located on the control network.

0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: EnableNTPasOAM"
       ::= {acMultipleIP 4}



     acMultipleIPEnableSCTPasControl OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Sets the location of the Stream Control Transmission Protocol
(SCTP). If this parameter is set and the machine is functioning
in multiple IPs mode, the SCTP is located on the control
network. If not, the SCTP is located on the OAM network.

0 = Default
1 = Enable.
Access: Offline.
AC INI-Param: EnableSCTPasControl"
       ::= {acMultipleIP 5}



     acMultipleIPEnableNetwotkSeparation OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables Network Physical Separation. Allows the user to have
separate port for each Network. Requires suitable hardware.

0 = Disabled 
1 = Enabled.
Access: Offline.
AC INI-Param: ENABLENETWORKPHYSICALSEPARATION"
       ::= {acMultipleIP 6}



     acMultipleIPInterfaceTableAction OBJECT-TYPE
       SYNTAX INTEGER {
                  done(1)
,
                  validateConfiguration(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This is an action object. Set this to validateConfiguration(2)
when you want the configuration in the acSysInterfaceTable
to be validated immediately (as opposed to at reset).  done(1)
is the default value for any GET on this object. The results
of the action should be followed in the syslog.
Access: Instant.
AC INI-Param: N/A"
       ::= {acMultipleIP 7}



     -- ****************************************
     -- acNetworkIP table declaration
     -- ****************************************
     acNetworkIPTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcNetworkIPEntry
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           "IP control table. Enables to add, remove or configure the device's networks."
       ::= {acMultipleIP 21}



     -- ****************************************
     -- acNetworkIP table entry
     -- ****************************************
     acNetworkIPEntry OBJECT-TYPE
       SYNTAX AcNetworkIPEntry
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           ""
       INDEX {acNetworkIPIndex}
       ::= {acNetworkIPTable 1}



     -- ****************************************
     -- acNetworkIP TABLE
     -- ****************************************
     AcNetworkIPEntry ::= SEQUENCE {
       acNetworkIPIndex                                INTEGER,
       acNetworkIPIfIndex                              Unsigned32,
       acNetworkIPLocalIPAddress                       IpAddress,
       acNetworkIPLocalSubnetMask                      IpAddress,
       acNetworkIPLocalDefGW                           IpAddress,
       acNetworkIPAdminState                           INTEGER
     }



     acNetworkIPIndex OBJECT-TYPE
       SYNTAX INTEGER {
                  oam(1)
,
                  media(2)
,
                  control(3)

                  }
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           "The row's index.
AC INI-Param: N/A"
       ::= {acNetworkIPEntry 1}



     acNetworkIPIfIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..2)
       MAX-ACCESS read-only
       STATUS obsolete
       DESCRIPTION
           "The row's index in the IF MIB.
The IF MIB is not yet supported and so for now this is the
same as the ipCidrRouteIfIndex object.
0 = OAM
1 = Media
2 = Control.
AC INI-Param: N/A"
       ::= {acNetworkIPEntry 2}



     acNetworkIPLocalIPAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Sets the IP address of the OAM (Operation, Administration &
Management) when operating in multiple IPs mode.

Range: Legal IP address
Default = 0.0.0.0.
Access: Online.
AC INI-Param: N/A"
       ::= {acNetworkIPEntry 3}



     acNetworkIPLocalSubnetMask OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Sets the Subnet Mask for the OAM interface, when operating in
multiple IPs mode.

Range: Legal Subnet
Default = 0.0.0.0.
Access: Online.
AC INI-Param: N/A"
       ::= {acNetworkIPEntry 4}



     acNetworkIPLocalDefGW OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Sets the Default gateway for the OAM interface when operating
in multiple IPs mode.

Range: Legal IP address in subnet
Default = 0.0.0.0.
Access: Online.
AC INI-Param: N/A"
       ::= {acNetworkIPEntry 5}



     acNetworkIPAdminState OBJECT-TYPE
       SYNTAX INTEGER {
                  lock(1)
,
                  unLock(2)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Determines if a row is currentely active or not.
Lock(1) - the row is in configuration (non active) state.
UnLock(2) - row is in active state.
Access: Online.
AC INI-Param: N/A"
       ::= {acNetworkIPEntry 6}



     -- ****************************************
     -- acSysInterface table declaration
     -- ****************************************
     acSysInterfaceTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysInterfaceEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Multiple Interfaces' Interface Table"
       ::= {acMultipleIP 22}



     -- ****************************************
     -- acSysInterface table entry
     -- ****************************************
     acSysInterfaceEntry OBJECT-TYPE
       SYNTAX AcSysInterfaceEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysInterfaceIndex}
       ::= {acSysInterfaceTable 1}



     -- ****************************************
     -- acSysInterface TABLE
     -- ****************************************
     AcSysInterfaceEntry ::= SEQUENCE {
       acSysInterfaceIndex                             Unsigned32,
       acSysInterfaceRowStatus                         RowStatus,
       acSysInterfaceAction                            INTEGER,
       acSysInterfaceActionRes                         INTEGER,
       acSysInterfaceApplicationTypes                  INTEGER,
       acSysInterfaceMode                              INTEGER,
       acSysInterfaceIPAddress                         SnmpAdminString,
       acSysInterfacePrefixLength                      Unsigned32,
       acSysInterfaceGateway                           SnmpAdminString,
       acSysInterfaceVlanID                            Unsigned32,
       acSysInterfaceName                              SnmpAdminString,
       acSysInterfacePrimaryDNSServerIPAddress         SnmpAdminString,
       acSysInterfaceSecondaryDNSServerIPAddress       SnmpAdminString,
       acSysInterfaceUnderlyingInterface               RowPointer,
       acSysInterfaceUnderlyingDevice                  RowPointer
     }



     acSysInterfaceIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..100)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line.
AC INI-Param: InterfaceTable_Index"
       ::= {acSysInterfaceEntry 1}



     acSysInterfaceRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS Field for line.
AC INI-Param: InterfaceTable_RowStatus"
       ::= {acSysInterfaceEntry 2}



     acSysInterfaceAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS.
AC INI-Param: InterfaceTable_Action"
       ::= {acSysInterfaceEntry 3}



     acSysInterfaceActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT.
AC INI-Param: InterfaceTable_ActionRes"
       ::= {acSysInterfaceEntry 4}



     acSysInterfaceApplicationTypes OBJECT-TYPE
       SYNTAX INTEGER {
                  oam(0)
,
                  media(1)
,
                  control(2)
,
                  oamAndMedia(3)
,
                  oamAndControl(4)
,
                  mediaAndControl(5)
,
                  oamAndMediaAndControl(6)
,
                  maintenance(99)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "The type assigned to the interface.
Access: Offline.
AC INI-Param: InterfaceTable_ApplicationTypes"
       ::= {acSysInterfaceEntry 5}



     acSysInterfaceMode OBJECT-TYPE
       SYNTAX INTEGER {
                  iPv6PrefixManual(3)
,
                  iPv6Manual(4)
,
                  iPv4Manual(10)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Interface configuration mode.
Access: Offline.
AC INI-Param: InterfaceTable_InterfaceMode"
       ::= {acSysInterfaceEntry 6}



     acSysInterfaceIPAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "IP Address (can be either IPv4 or IPv6) for this interface.
Access: Online.
AC INI-Param: InterfaceTable_IPAddress"
       ::= {acSysInterfaceEntry 7}



     acSysInterfacePrefixLength OBJECT-TYPE
       SYNTAX Unsigned32 (0..128)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "The number of 1 bits in this interfaces netmask.
Access: Offline.
AC INI-Param: InterfaceTable_PrefixLength"
       ::= {acSysInterfaceEntry 8}



     acSysInterfaceGateway OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Default Gateway. Filled in one row only. 0 in others.
Access: Offline.
AC INI-Param: InterfaceTable_Gateway"
       ::= {acSysInterfaceEntry 9}



     acSysInterfaceVlanID OBJECT-TYPE
       SYNTAX Unsigned32 (0..4094)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "VLAN ID of this interface.
Access: Offline.
AC INI-Param: InterfaceTable_VlanID"
       ::= {acSysInterfaceEntry 10}



     acSysInterfaceName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..16))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "a 16 character string of this interfaces name.
Access: Offline.
AC INI-Param: InterfaceTable_InterfaceName"
       ::= {acSysInterfaceEntry 11}



     acSysInterfacePrimaryDNSServerIPAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Primary DNS server IP address.
Access: Online.
AC INI-Param: InterfaceTable_PrimaryDNSServerIPAddress"
       ::= {acSysInterfaceEntry 12}



     acSysInterfaceSecondaryDNSServerIPAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Secondary DNS server IP address.
Access: Online.
AC INI-Param: InterfaceTable_SecondaryDNSServerIPAddress"
       ::= {acSysInterfaceEntry 13}



     acSysInterfaceUnderlyingInterface OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Multiple Interfaces' Interface Table.
Access: Offline.
AC INI-Param: InterfaceTable_UnderlyingInterface"
       ::= {acSysInterfaceEntry 14}



     acSysInterfaceUnderlyingDevice OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Pointer to the Underlying Device.
Access: Offline.
AC INI-Param: InterfaceTable_UnderlyingDevice"
       ::= {acSysInterfaceEntry 15}



     -- ****************************************
     -- acSysPhysicalPorts table declaration
     -- ****************************************
     acSysPhysicalPortsTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysPhysicalPortsEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Physical Ports Table"
       ::= {acMultipleIP 23}



     -- ****************************************
     -- acSysPhysicalPorts table entry
     -- ****************************************
     acSysPhysicalPortsEntry OBJECT-TYPE
       SYNTAX AcSysPhysicalPortsEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysPhysicalPortsIndex}
       ::= {acSysPhysicalPortsTable 1}



     -- ****************************************
     -- acSysPhysicalPorts TABLE
     -- ****************************************
     AcSysPhysicalPortsEntry ::= SEQUENCE {
       acSysPhysicalPortsIndex                         Unsigned32,
       acSysPhysicalPortsRowStatus                     RowStatus,
       acSysPhysicalPortsAction                        INTEGER,
       acSysPhysicalPortsActionRes                     INTEGER,
       acSysPhysicalPortsPort                          SnmpAdminString,
       acSysPhysicalPortsMode                          INTEGER,
       acSysPhysicalPortsNativeVlan                    Unsigned32,
       acSysPhysicalPortsSpeedDuplex                   INTEGER,
       acSysPhysicalPortsPortDescription               SnmpAdminString,
       acSysPhysicalPortsGroupMember                   SnmpAdminString,
       acSysPhysicalPortsGroupStatus                   SnmpAdminString
     }



     acSysPhysicalPortsIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..5)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line.
AC INI-Param: PhysicalPortsTable_Index"
       ::= {acSysPhysicalPortsEntry 1}



     acSysPhysicalPortsRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS Field for line.
AC INI-Param: PhysicalPortsTable_RowStatus"
       ::= {acSysPhysicalPortsEntry 2}



     acSysPhysicalPortsAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS.
AC INI-Param: PhysicalPortsTable_Action"
       ::= {acSysPhysicalPortsEntry 3}



     acSysPhysicalPortsActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT.
AC INI-Param: PhysicalPortsTable_ActionRes"
       ::= {acSysPhysicalPortsEntry 4}



     acSysPhysicalPortsPort OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..17))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Physical Ports Table.
AC INI-Param: PhysicalPortsTable_Port"
       ::= {acSysPhysicalPortsEntry 5}



     acSysPhysicalPortsMode OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Port Enable/Disable.
AC INI-Param: PhysicalPortsTable_Mode"
       ::= {acSysPhysicalPortsEntry 6}



     acSysPhysicalPortsNativeVlan OBJECT-TYPE
       SYNTAX Unsigned32 (0..4096)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Port's Native VID or PVID.
Access: Offline.
AC INI-Param: PhysicalPortsTable_NativeVlan"
       ::= {acSysPhysicalPortsEntry 7}



     acSysPhysicalPortsSpeedDuplex OBJECT-TYPE
       SYNTAX INTEGER {
                  s10BaseTHalfDuplex(0)
,
                  s10BaseTFullDuplex(1)
,
                  s100BaseTHalfDuplex(2)
,
                  s100BaseTFullDuplex(3)
,
                  autoNegotiation(4)
,
                  s1000BaseTHalfDuplex(6)
,
                  s1000BaseTFullDuplex(7)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Port's Speed and Duplex Mode.
Access: Offline.
AC INI-Param: PhysicalPortsTable_SpeedDuplex"
       ::= {acSysPhysicalPortsEntry 8}



     acSysPhysicalPortsPortDescription OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..17))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Port's User Description.
Access: Offline.
AC INI-Param: PhysicalPortsTable_PortDescription"
       ::= {acSysPhysicalPortsEntry 9}



     acSysPhysicalPortsGroupMember OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..17))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Physical Ports Table.
AC INI-Param: PhysicalPortsTable_GroupMember"
       ::= {acSysPhysicalPortsEntry 10}



     acSysPhysicalPortsGroupStatus OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..17))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Active or Redundant Status.
AC INI-Param: PhysicalPortsTable_GroupStatus"
       ::= {acSysPhysicalPortsEntry 11}



     -- ****************************************
     -- acSysEtherGroup table declaration
     -- ****************************************
     acSysEtherGroupTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysEtherGroupEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Ether Group Table"
       ::= {acMultipleIP 24}



     -- ****************************************
     -- acSysEtherGroup table entry
     -- ****************************************
     acSysEtherGroupEntry OBJECT-TYPE
       SYNTAX AcSysEtherGroupEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysEtherGroupIndex}
       ::= {acSysEtherGroupTable 1}



     -- ****************************************
     -- acSysEtherGroup TABLE
     -- ****************************************
     AcSysEtherGroupEntry ::= SEQUENCE {
       acSysEtherGroupIndex                            Unsigned32,
       acSysEtherGroupRowStatus                        RowStatus,
       acSysEtherGroupAction                           INTEGER,
       acSysEtherGroupActionRes                        INTEGER,
       acSysEtherGroupGroup                            SnmpAdminString,
       acSysEtherGroupMode                             INTEGER,
       acSysEtherGroupMember1                          RowPointer,
       acSysEtherGroupMember2                          RowPointer
     }



     acSysEtherGroupIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..5)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line.
AC INI-Param: EtherGroupTable_Index"
       ::= {acSysEtherGroupEntry 1}



     acSysEtherGroupRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS Field for line
 Static table - only notInService/active supported.
AC INI-Param: EtherGroupTable_RowStatus"
       ::= {acSysEtherGroupEntry 2}



     acSysEtherGroupAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS.
AC INI-Param: EtherGroupTable_Action"
       ::= {acSysEtherGroupEntry 3}



     acSysEtherGroupActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT.
AC INI-Param: EtherGroupTable_ActionRes"
       ::= {acSysEtherGroupEntry 4}



     acSysEtherGroupGroup OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..15))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Ethernet Group's Name.
AC INI-Param: EtherGroupTable_Group"
       ::= {acSysEtherGroupEntry 5}



     acSysEtherGroupMode OBJECT-TYPE
       SYNTAX INTEGER {
                  oneRXoneTX(2)
,
                  twoRXoneTX(3)
,
                  twoRXtwoTX(4)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Group Mode of Operation.
Access: Offline.
AC INI-Param: EtherGroupTable_Mode"
       ::= {acSysEtherGroupEntry 6}



     acSysEtherGroupMember1 OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "First Member of the Group. 
Select the OID corresponding to the one appearing in the Physical
Ports table.
The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5.
acSysPhysicalPortsPort.
Access: Offline.
AC INI-Param: EtherGroupTable_Member1"
       ::= {acSysEtherGroupEntry 7}



     acSysEtherGroupMember2 OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Second Member of the Group.
Select the OID corresponding to the one appearing in the Physical
Ports table.
The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5.
acSysPhysicalPortsPort.
Access: Offline.
AC INI-Param: EtherGroupTable_Member2"
       ::= {acSysEtherGroupEntry 8}



     -- ****************************************
     -- acSysStaticRoute table declaration
     -- ****************************************
     acSysStaticRouteTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysStaticRouteEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acMultipleIP 25}



     -- ****************************************
     -- acSysStaticRoute table entry
     -- ****************************************
     acSysStaticRouteEntry OBJECT-TYPE
       SYNTAX AcSysStaticRouteEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysStaticRouteIndex}
       ::= {acSysStaticRouteTable 1}



     -- ****************************************
     -- acSysStaticRoute TABLE
     -- ****************************************
     AcSysStaticRouteEntry ::= SEQUENCE {
       acSysStaticRouteIndex                           Unsigned32,
       acSysStaticRouteRowStatus                       RowStatus,
       acSysStaticRouteAction                          INTEGER,
       acSysStaticRouteActionRes                       INTEGER,
       acSysStaticRouteInterfaceName                   SnmpAdminString,
       acSysStaticRouteDeviceName                      RowPointer,
       acSysStaticRouteDestination                     SnmpAdminString,
       acSysStaticRoutePrefixLength                    Unsigned32,
       acSysStaticRouteGateway                         SnmpAdminString,
       acSysStaticRouteDescription                     SnmpAdminString
     }



     acSysStaticRouteIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..200)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "This parameter is used for the Power Over Ethenet (PoE) Index
Field for line. Internal parameter.
AC INI-Param: StaticRouteTable_Index"
       ::= {acSysStaticRouteEntry 1}



     acSysStaticRouteRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Static Route Table ROWSTATUS field for line. Internal parameter.
Access: Online.
AC INI-Param: StaticRouteTable_RowStatus"
       ::= {acSysStaticRouteEntry 2}



     acSysStaticRouteAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Static Route Table Mangement Field for ACTIONS. Internal parameter.
Access: Online.
AC INI-Param: StaticRouteTable_Action"
       ::= {acSysStaticRouteEntry 3}



     acSysStaticRouteActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Static Route Table Mangement Field for ACTIONS RESULT. Internal
parameter.
AC INI-Param: StaticRouteTable_ActionRes"
       ::= {acSysStaticRouteEntry 4}



     acSysStaticRouteInterfaceName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..16))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Network interface name.
Access: Online.
AC INI-Param: StaticRouteTable_InterfaceName"
       ::= {acSysStaticRouteEntry 5}



     acSysStaticRouteDeviceName OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Device name.
Access: Online.
AC INI-Param: StaticRouteTable_DeviceName"
       ::= {acSysStaticRouteEntry 6}



     acSysStaticRouteDestination OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Destination IP address.
Access: Online.
AC INI-Param: StaticRouteTable_Destination"
       ::= {acSysStaticRouteEntry 7}



     acSysStaticRoutePrefixLength OBJECT-TYPE
       SYNTAX Unsigned32 (0..128)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Prefix length.
Access: Online.
AC INI-Param: StaticRouteTable_PrefixLength"
       ::= {acSysStaticRouteEntry 8}



     acSysStaticRouteGateway OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "IP gateway address.
Access: Online.
AC INI-Param: StaticRouteTable_Gateway"
       ::= {acSysStaticRouteEntry 9}



     acSysStaticRouteDescription OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..29))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Static route description.
Access: Online.
AC INI-Param: StaticRouteTable_Description"
       ::= {acSysStaticRouteEntry 10}



     -- ****************************************
     -- acSysEthernetDevice table declaration
     -- ****************************************
     acSysEthernetDeviceTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysEthernetDeviceEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acMultipleIP 26}



     -- ****************************************
     -- acSysEthernetDevice table entry
     -- ****************************************
     acSysEthernetDeviceEntry OBJECT-TYPE
       SYNTAX AcSysEthernetDeviceEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysEthernetDeviceIndex}
       ::= {acSysEthernetDeviceTable 1}



     -- ****************************************
     -- acSysEthernetDevice TABLE
     -- ****************************************
     AcSysEthernetDeviceEntry ::= SEQUENCE {
       acSysEthernetDeviceIndex                        Unsigned32,
       acSysEthernetDeviceRowStatus                    RowStatus,
       acSysEthernetDeviceAction                       INTEGER,
       acSysEthernetDeviceActionRes                    INTEGER,
       acSysEthernetDeviceVlanID                       Unsigned32,
       acSysEthernetDeviceUnderlyingInterface          RowPointer,
       acSysEthernetDeviceName                         SnmpAdminString
     }



     acSysEthernetDeviceIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..100)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "This parameter is used for the Power Over Ethenet (PoE) Index
Field for line. Internal parameter.
AC INI-Param: DeviceTable_Index"
       ::= {acSysEthernetDeviceEntry 1}



     acSysEthernetDeviceRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Ethernet Device Table ROWSTATUS field for line. Internal parameter.
Access: Offline.
AC INI-Param: DeviceTable_RowStatus"
       ::= {acSysEthernetDeviceEntry 2}



     acSysEthernetDeviceAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Ethernet Device Table Mangement Field for ACTIONS. Internal
parameter.
Access: Offline.
AC INI-Param: DeviceTable_Action"
       ::= {acSysEthernetDeviceEntry 3}



     acSysEthernetDeviceActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Ethernet Device Table Mangement Field for ACTIONS RESULT. Internal
parameter.
AC INI-Param: DeviceTable_ActionRes"
       ::= {acSysEthernetDeviceEntry 4}



     acSysEthernetDeviceVlanID OBJECT-TYPE
       SYNTAX Unsigned32 (1..4094)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Vlan ID.
Access: Offline.
AC INI-Param: DeviceTable_VlanID"
       ::= {acSysEthernetDeviceEntry 5}



     acSysEthernetDeviceUnderlyingInterface OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Underlying Interface.
Access: Offline.
AC INI-Param: DeviceTable_UnderlyingInterface"
       ::= {acSysEthernetDeviceEntry 6}



     acSysEthernetDeviceName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..16))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Name.
Access: Offline.
AC INI-Param: DeviceTable_DeviceName"
       ::= {acSysEthernetDeviceEntry 7}



     acSyslog OBJECT IDENTIFIER ::= {acSysNetworkConfig 2}


     acSyslogServerIPAddress  OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "This parameter defines the IP address in dotted format notation.
e.g., 192.10.1.255
Range = Legal IP address.
Access: Online.
AC INI-Param: SYSLOGSERVERIP"
       ::= {acSyslog 1}



     acSyslogEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enable SysLog protocol log.
Access: Online.
AC INI-Param: ENABLESYSLOG"
       ::= {acSyslog 2}



     acSyslogAcSyslogServerPortNumber OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the Port number of the Syslog Server.
Range = Legal Port Number.
Access: Online.
AC INI-Param: SyslogServerPort"
       ::= {acSyslog 3}



     acSyslogFacility OBJECT-TYPE
       SYNTAX Unsigned32 (16..23)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "parameter to determine the facility number at syslog messages.
can be:
16 = local use 0 (local0)
17 = local use 1 (local1)
..
23 = local use 0 (local7).
Access: Online.
AC INI-Param: SyslogFacility"
       ::= {acSyslog 4}



     acSysNTP OBJECT IDENTIFIER ::= {acSysNetworkConfig 3}


     acSysNTPServerIPAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter is used to define the NTP server's IP address.
Range = Legal IP address.
Access: Instant.
AC INI-Param: NTPServerIP"
       ::= {acSysNTP 1}



     acSysNTPUtcOffset OBJECT-TYPE
       SYNTAX Integer32 (-86400..86400)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is used to define the NTP time to offset, in
seconds.

Default = 0
Range = -86400 to +86400 seconds.
Access: Instant.
AC INI-Param: NTPServerUTCOffset"
       ::= {acSysNTP 2}



     acSysNTPUpdateInterval OBJECT-TYPE
       SYNTAX Unsigned32 (1..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines the NTP update interval, in seconds.
It's inadvisable to set it exceeding 1 month (2592000 seconds).
Range = 0 to 2592000 seconds
Default = 86400 seconds.
Access: Instant.
AC INI-Param: NTPUpdateInterval"
       ::= {acSysNTP 3}



     acSysNTPSecondaryServerIP OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Defines the NTP Secondary Server IP address.
Access: Instant.
AC INI-Param: NTPSecondaryServerIP"
       ::= {acSysNTP 4}



     acSysNTPAuthKeyId OBJECT-TYPE
       SYNTAX Integer32 (-2147483648..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "NTP authentication key identifier (0 = no authentication).
Access: Instant.
AC INI-Param: ntpAuthKeyId"
       ::= {acSysNTP 5}



     acSysNTPAuthMd5Key OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..31))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "NTP authentication secret key.
Access: Instant.
AC INI-Param: ntpAuthMd5KeyPassword"
       ::= {acSysNTP 6}



     acSysNTPPrimaryServerAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the NTP Server FQDN or IP address.
Access: Instant.
AC INI-Param: NTPServer"
       ::= {acSysNTP 7}



     acSysNTPSecondaryServerAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the NTP Secondary FQDN or Server IP address.
Access: Instant.
AC INI-Param: NTPSecondaryServer"
       ::= {acSysNTP 8}



     acSysDayLightSavingTime OBJECT IDENTIFIER ::= {acSysNTP 21}


     acSysDayLightSavingTimeMode OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines whether to enable the time ajustment to day light
saving time while update time from NTP server.
Access: Instant.
AC INI-Param: DayLightSavingTimeEnable"
       ::= {acSysDayLightSavingTime 1}



     acSysDayLightSavingTimeOffset OBJECT-TYPE
       SYNTAX Unsigned32 (0..120)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "when DayLightSavingTimeEnable is Enable, this parametes determine
the fix size in minutes: 0-120.
Access: Instant.
AC INI-Param: DayLightSavingTimeOffset"
       ::= {acSysDayLightSavingTime 2}



     acSysDayLightSavingTimeStart OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..16))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines the date and time of starting day light
time in current year.
2 Possible Formats: 1. (Day of Year) mo:dd:hh:mm . 2. (Day
of Month) mo:wday/week:hh:mm where week of month is 01-04, or
05 for specifying last week of the month, and wday is one
of the Week Days: SUN, MON, TUE, WED, THU, FRI, SAT.
Access: Instant.
AC INI-Param: DayLightSavingTimeStart"
       ::= {acSysDayLightSavingTime 3}



     acSysDayLightSavingTimeEnd OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..16))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines the date and time of ending day light
time in current year.
2 Possible Formats: 1. (Day of Year) mo:dd:hh:mm . 2. (Day
of Month) mo:wday/week:hh:mm where week of month is 01-04, or
05 for specifying last week of the month, and wday is one
of the Week Days: SUN, MON, TUE, WED, THU, FRI, SAT.
Access: Instant.
AC INI-Param: DayLightSavingTimeEnd"
       ::= {acSysDayLightSavingTime 4}



     acSysWEB OBJECT IDENTIFIER ::= {acSysNetworkConfig 4}


     acSysWEBConfigDisable OBJECT-TYPE
       SYNTAX INTEGER {
                  enable(0)
,
                  disable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables Web Configuration. 
0 = Read & Write mode (default) 
1 = Read Only mode.
Access: Offline.
AC INI-Param: DISABLEWEBCONFIG"
       ::= {acSysWEB 1}



     acSysWEBHTTPSOnly OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Use this parameter to allow only HTTPS connections (force security).
When set to 1, unencrypted HTTP (normally, port 80)
is blocked.
Access: Offline.
AC INI-Param: HTTPSOnly"
       ::= {acSysWEB 2}



     acSysWEBHTTPSPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determine the local Secure HTTPS port of the device.
The default port is 443.
Range = 1-65535 (other restrictions may apply in this range).
Access: Offline.
AC INI-Param: HTTPSPORT"
       ::= {acSysWEB 3}



     acSysWEBWebUseRadiusLogin OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Uses the RADIUS (Remote Authentication Dial-In User Server/Service)
for Web interface authentication. 
Make sure that ENABLERADIUS is on. 
Use of this parameter without HTTPSONLY = 1 is not recommended.
Access: Instant.
AC INI-Param: WEBRADIUSLOGIN"
       ::= {acSysWEB 4}



     acSysWEBHTTPSCipherString OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..200))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Requires client certificates for HTTPS connection. The client
certificate must be preloaded on the gateway, and its matching
private key must be installed on the managing computer.
Time and date must be correctly set on the gateway, for the
client certificate to be verified.
Access: Offline.
AC INI-Param: HTTPSCipherString"
       ::= {acSysWEB 5}



     acSysWEBDenyAuthenticationTimer OBJECT-TYPE
       SYNTAX Unsigned32 (0..86400)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the time the next authentication attempt from the last
authentication faild IP should be denied.

The range can be any value from 0 - 86400 in seconds.
Access: Online.
AC INI-Param: DenyAuthenticationTimer "
       ::= {acSysWEB 6}



     acSysWEBWanHttpPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Determines the WAN HTTP port of the device.
If set to 0, WAN HTTP access will not be possible.
Range = 0 to 65535 (other restrictions may apply in this range).
Access: Offline.
AC INI-Param: WanMgmtHttpPort"
       ::= {acSysWEB 7}



     acSysWEBWanHttpsPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Determines the WAN HTTPS port of the device.
If set to 0, WAN HTTPS access will not be possible.
Range = 0 to 65535 (other restrictions may apply in this range).
Access: Offline.
AC INI-Param: WanMgmtHttpsPort"
       ::= {acSysWEB 8}



     acSysWEBAllowWanHttp OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables WAN access to the management interface via
HTTP.
Access: Offline.
AC INI-Param: AllowWanHttp"
       ::= {acSysWEB 9}



     acSysWEBAllowWanHttps OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables WAN access to the management interface via
HTTPS.
Access: Offline.
AC INI-Param: AllowWanHttps"
       ::= {acSysWEB 10}



     acSysWEBTLSClientCipherString OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Cipher-suite selection string for TLS clients.
Access: Instant.
AC INI-Param: TLSClientCipherString"
       ::= {acSysWEB 11}



     acSysWEBUseLdapForLogin OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines whether device uses LDAP for WEB/CLI authenticating
management interfaces (0-not use, 1-use).
Access: Offline.
AC INI-Param: MGMTLDAPLOGIN"
       ::= {acSysWEB 12}



     -- ****************************************
     -- acSysWEBACL table declaration
     -- ****************************************
     acSysWEBACLTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysWEBACLEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Access control list for the WEB."
       ::= {acSysWEB 21}



     -- ****************************************
     -- acSysWEBACL table entry
     -- ****************************************
     acSysWEBACLEntry OBJECT-TYPE
       SYNTAX AcSysWEBACLEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysWEBACLIndex}
       ::= {acSysWEBACLTable 1}



     -- ****************************************
     -- acSysWEBACL TABLE
     -- ****************************************
     AcSysWEBACLEntry ::= SEQUENCE {
       acSysWEBACLIndex                                Unsigned32,
       acSysWEBACLIP                                   IpAddress
     }



     acSysWEBACLIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..9)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "WEB ACL (Access Control List) index.
AC INI-Param: N/A"
       ::= {acSysWEBACLEntry 1}



     acSysWEBACLIP OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Allows IP addresses to connect to the Web interface. Set to
zeroes to allow all IP addresses.
Range: Valid IP address
.
Access: Instant.
AC INI-Param: WEBACCESSLIST"
       ::= {acSysWEBACLEntry 2}



     acSysWEBAccess OBJECT IDENTIFIER ::= {acSysNetworkConfig 5}


     -- ****************************************
     -- acSysWEBAccess table declaration
     -- ****************************************
     acSysWEBAccessTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysWEBAccessEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysWEBAccess 1}



     -- ****************************************
     -- acSysWEBAccess table entry
     -- ****************************************
     acSysWEBAccessEntry OBJECT-TYPE
       SYNTAX AcSysWEBAccessEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysWEBAccessIndex}
       ::= {acSysWEBAccessTable 1}



     -- ****************************************
     -- acSysWEBAccess TABLE
     -- ****************************************
     AcSysWEBAccessEntry ::= SEQUENCE {
       acSysWEBAccessRowStatus                         Unsigned32,
       acSysWEBAccessAction                            Unsigned32,
       acSysWEBAccessActionResult                      Unsigned32,
       acSysWEBAccessIndex                             INTEGER,
       acSysWEBAccessUserName                          SnmpAdminString,
       acSysWEBAccessUserCode                          SnmpAdminString,
       acSysWEBAccessWebAuthMode                       INTEGER
     }



     acSysWEBAccessRowStatus OBJECT-TYPE
       SYNTAX Unsigned32 (1..1)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "WEB Basic row-status.
AC INI-Param: WEBAccessRowStatus"
       ::= {acSysWEBAccessEntry 1}



     acSysWEBAccessAction OBJECT-TYPE
       SYNTAX Unsigned32 (0..0)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "WEB Access action.
AC INI-Param: WEBAccessAction"
       ::= {acSysWEBAccessEntry 2}



     acSysWEBAccessActionResult OBJECT-TYPE
       SYNTAX Unsigned32 (0..0)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "WEB Access action result.
AC INI-Param: N/A"
       ::= {acSysWEBAccessEntry 3}



     acSysWEBAccessIndex OBJECT-TYPE
       SYNTAX INTEGER {
                  administrator(0)
,
                  monitoringLevel(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "WEB Access index.
AC INI-Param: N/A"
       ::= {acSysWEBAccessEntry 4}



     acSysWEBAccessUserName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..60))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "WEB Basic user name. Range = String[26].
Access: Instant.
AC INI-Param: WEBAccessUserName "
       ::= {acSysWEBAccessEntry 5}



     acSysWEBAccessUserCode OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..60))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "WEB Basic userAccess.
Access: Instant.
AC INI-Param: WEBAccessUserCode "
       ::= {acSysWEBAccessEntry 6}



     acSysWEBAccessWebAuthMode OBJECT-TYPE
       SYNTAX INTEGER {
                  basicMode(0)
,
                  digestModeWhenPossible(1)
,
                  digestModeHTTPOnly(2)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Selects HTTP basic (clear text) or digest (MD5) authentication
for the web interface.
When set to 0, basic authentication (clear text) will be used.
When set to 1, digest authentication (MD5) will be used.
When set to 2, digest authentication (MD5) will be used for
HTTP, while basic authentication will be used for HTTPS.
Note that turning on RADIUS login forces basic authentication.
Access: Instant.
AC INI-Param: WebAuthMode"
       ::= {acSysWEBAccessEntry 7}



     acSysNATTraversal OBJECT IDENTIFIER ::= {acSysNetworkConfig 6}


     acSysSTUN OBJECT IDENTIFIER ::= {acSysNATTraversal 21}


     acSysSTUNEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is used to enable the STUN module, used for NAT
traversal of UDP packets.
Access: Offline.
AC INI-Param: ENABLESTUN"
       ::= {acSysSTUN 1}



     acSysSTUNPrimaryServerIP OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Defines the primary STUN Server IP address.
Range = Legal IP address.
Access: Offline.
AC INI-Param: STUNSERVERPRIMARYIP"
       ::= {acSysSTUN 2}



     acSysSTUNSecondaryServerIP OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Defines the secondary STUN server IP address.
Range = Legal IP address.
Access: Offline.
AC INI-Param: STUNSERVERSECONDARYIP"
       ::= {acSysSTUN 3}



     acSysSTUNBindingLifeTime OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is used to define the NAT binding lifetime, in
seconds. STUN refreshes the binding information after this
time expires.
Range = 0 - 2592000.
Access: Offline.
AC INI-Param: NATBINDINGDEFAULTTIMEOUT"
       ::= {acSysSTUN 4}



     acSysTelnet OBJECT IDENTIFIER ::= {acSysNetworkConfig 7}


     acSysTelnetServerEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)
,
                  ssl(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables the embedded Telnet server. Telnet is disabled
by default for security reasons.
0 = Disable
1= Enable
2 = SSL mode (if available - requires an SSL-aware Telnet client
software) 
SSL mode is not available on the MP-108 / MP-124 media gateways.
Access: Instant.
AC INI-Param: TelnetServerEnable"
       ::= {acSysTelnet 1}



     acSysTelnetServerPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the port number for the embedded Telnet server.
Range = Valid port number.
Access: Online.
AC INI-Param: TELNETSERVERPORT"
       ::= {acSysTelnet 2}



     acSysTelnetServerIdleDisconnect OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is used to set the timeout for disconnection
of an idle Telnet session (minutes). When set to zero, idle
sessions are not disconnected.

Range: Any number.
Access: Offline.
AC INI-Param: TelnetServerIdleDisconnect"
       ::= {acSysTelnet 3}



     acSysTelnetSSHServerPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the port number for the embedded SSH server.
Range = Valid port number.
Access: Online.
AC INI-Param: SSHServerPort"
       ::= {acSysTelnet 4}



     acSysTelnetSSHServerEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables the embedded SSH server.
0 = Disable
1= Enable
.
Access: Online.
AC INI-Param: SSHServerEnable"
       ::= {acSysTelnet 5}



     acSysTelnetSSHAdminKey OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..510))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter holds an RSA public key for strong authentication
to the SSH interface (if enabled).
The value should be a base64-encoded string
 see the Security appendix for additional information.
Access: Instant.
AC INI-Param: SSHAdminKey"
       ::= {acSysTelnet 6}



     acSysTelnetSSHRequirePublicKey OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables RSA public keys in SSH.
When set to 0, RSA public keys are optional (if SSHAdminKey
is set).
When set to 1, RSA public keys are mandatory.
Access: Instant.
AC INI-Param: SSHRequirePublicKey"
       ::= {acSysTelnet 7}



     acSysTelnetServerWanPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Determines the WAN Telnet port of the device.
If set to 0, WAN Telnet access will not be possible.
Range = 0 to 65535 (other restrictions may apply in this range).
Access: Offline.
AC INI-Param: WanMgmtTelnetPort"
       ::= {acSysTelnet 8}



     acSysTelnetWanSSHServerPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Determines the WAN Telnet port of the device.
If set to 0, WAN Telnet access will not be possible.
Range = 0 to 65535 (other restrictions may apply in this range).
Access: Offline.
AC INI-Param: WanMgmtSSHPort"
       ::= {acSysTelnet 9}



     acSysTelnetSSHMaxSessions OBJECT-TYPE
       SYNTAX Unsigned32 (1..5)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Configure maximum allowed number of SSH sessions.
Access: Online.
AC INI-Param: SSHMaxSessions"
       ::= {acSysTelnet 10}



     acSysTelnetSSHMaxPayloadSize OBJECT-TYPE
       SYNTAX Unsigned32 (550..32768)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Configure maximum uncompressed payload size for SSH packets,
in bytes.
Access: Online.
AC INI-Param: SSHMaxPayloadSize"
       ::= {acSysTelnet 11}



     acSysTelnetSSHMaxBinaryPacketSize OBJECT-TYPE
       SYNTAX Unsigned32 (582..35000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Configure maximum packet size for SSH packets, in bytes.
Access: Online.
AC INI-Param: SSHMaxBinaryPacketSize"
       ::= {acSysTelnet 12}



     acSysTelnetAllowWanTelnet OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables WAN access to the management interface via
Telnet.
Access: Offline.
AC INI-Param: AllowWanTelnet"
       ::= {acSysTelnet 13}



     acSysTelnetAllowWanSSH OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables WAN access to the management interface via
SSH.
Access: Offline.
AC INI-Param: AllowWanSSH"
       ::= {acSysTelnet 14}



     acSysTelnetMaxSessions OBJECT-TYPE
       SYNTAX Unsigned32 (1..5)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Configures the maximum allowed number of telnet sessions.
Access: Instant.
AC INI-Param: TelnetMaxSessions"
       ::= {acSysTelnet 15}



     acSysHTTPClient OBJECT IDENTIFIER ::= {acSysNetworkConfig 8}


     acSysHTTPClientAutoUpdatePredefinedTime OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..6))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Schedules an automatic update to a predefined time of the day.
The range is 'HH:MM' (24-hour format).
For example: 20:18
.
Access: Online.
AC INI-Param: AutoUpdatePredefinedTime"
       ::= {acSysHTTPClient 1}



     acSysHTTPClientAutoUpdateFrequency OBJECT-TYPE
       SYNTAX Unsigned32 (0..65536)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the number of minutes the gateway waits between automatic
updates.

The default value is 0 (the update at fixed intervals mechanism
is disabled).

Range: Any number
.
Access: Online.
AC INI-Param: AutoUpdateFrequency"
       ::= {acSysHTTPClient 2}



     acSysHTTPClientAutoUpdateCmpFile OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables / disables the automatic update mechanism for the cmp
file.

0 = The automatic update mechanism doesn't apply to the cmp
file (default).
1 = The automatic update mechanism includes the cmp file.
Access: Online.
AC INI-Param: AutoUpdateCmpFile"
       ::= {acSysHTTPClient 3}



     acSysHTTPClientCmpFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter provides a  link to a software image (CMP file)
to be downloaded from a remote server.
.
Access: Offline.
AC INI-Param: CmpFileURL"
       ::= {acSysHTTPClient 4}



     acSysHTTPClientIniFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..758))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter provides a link to an ini file to be downloaded
from a remote server.
.
Access: Offline.
AC INI-Param: IniFileURL"
       ::= {acSysHTTPClient 5}



     acSysHTTPClientIniFileTemplateURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to an ini file to be downloaded from a remote
server, in addition to IniFileUrl.
Range = http://server_name/file, https://server_name/file.
Access: Offline.
AC INI-Param: IniFileTemplateUrl"
       ::= {acSysHTTPClient 6}



     acSysHTTPClientCPTFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to a Call Progress Tones (CPT) file to be downloaded
from a remote server.
Range = http://server_name/file, https://server_name/file.
Access: Offline.
AC INI-Param: CptFileUrl"
       ::= {acSysHTTPClient 7}



     acSysHTTPClientVPFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to a Voice Prompts file to be downloaded from
a remote server.
Range = http://server_name/file, https://server_name/file.
Access: Online.
AC INI-Param: VpFileUrl"
       ::= {acSysHTTPClient 8}



     acSysHTTPClientPRTFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to a prerecorded tones dat file, to be downloaded
from a remote server.
Range = http://server_name/file, https://server_name/file.
Access: Online.
AC INI-Param: PrtFileUrl"
       ::= {acSysHTTPClient 9}



     acSysHTTPClientFXSCoeffFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Provides a link to an FXS coefficients file, to be downloaded
from a remote server.
Range = http://server_name/file, https://server_name/file.
Access: Instant.
AC INI-Param: FXSCoeffFileUrl"
       ::= {acSysHTTPClient 10}



     acSysHTTPClientFXOCoeffFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Provides a link to an FXO coefficients file, to be downloaded
from a remote server.
Range = http://server_name/file, https://server_name/file.
Access: Instant.
AC INI-Param: FXOCoeffFileUrl"
       ::= {acSysHTTPClient 11}



     acSysHTTPClientCASFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to a Channel Associated Signaling (CAS) file
to be downloaded from a remote server.
Range = http://server_name/file, https://server_name/file.
Access: Online.
AC INI-Param: CasFileUrl"
       ::= {acSysHTTPClient 12}



     acSysHTTPClientXMLFileUrl OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to an XML segments file, to be downloaded from
a remote server.
See the chapter 'Automatic Update Facility' for supported URL
options.
Access: Online.
AC INI-Param: APSSegmentsFileUrl "
       ::= {acSysHTTPClient 13}



     acSysHTTPClientCoderTableFileUrl OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to a coder table (CTBL) file that is to be downloaded
from a remote server.
.
Access: Online.
AC INI-Param: CoderTableFileUrl"
       ::= {acSysHTTPClient 14}



     acSysHTTPClientUserInfoFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to the user information file, to be downloaded
using Automatic Update.
Relevant only for H323 or SIP controlled devices.
Access: Online.
AC INI-Param: UserInfoFileUrl"
       ::= {acSysHTTPClient 15}



     acSysHTTPClientDialPlanFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "URL for downloading a Dial Plan file using the Automatic Update
facility.
Access: Online.
AC INI-Param: DialPlanFileUrl"
       ::= {acSysHTTPClient 16}



     acSysHTTPClientTLSPkeyFileUrl OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "URL for downloading a TLS private key file using the Automatic
Update facility.
Access: Offline.
AC INI-Param: TLSPkeyFileUrl"
       ::= {acSysHTTPClient 17}



     acSysHTTPClientTLSCertFileUrl OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "URL for downloading a TLS certificate file using the Automatic
Update facility.
Access: Offline.
AC INI-Param: TLSCertFileUrl"
       ::= {acSysHTTPClient 18}



     acSysHTTPClientTLSRootFileUrl OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "URL for downloading a TLS trusted root certificate file using
the Automatic Update facility.
Access: Offline.
AC INI-Param: TLSRootFileUrl"
       ::= {acSysHTTPClient 19}



     acSysHTTPClientWebLogoFileUrl OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "URL for downloading a logo file for the web interface using
the Automatic Update facility.
Access: Online.
AC INI-Param: WebLogoFileUrl"
       ::= {acSysHTTPClient 20}



     acSysHTTPClientVideoFontFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Indicates the URL for downloading a logo file for the web interface
using the Automatic Update facility.
Access: Online.
AC INI-Param: VideoFontFileUrl"
       ::= {acSysHTTPClient 21}



     acSysHTTPClientV5PortConfFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to a software (V5PortConfiguration file) to
be downloaded from a remote server.
Access: Online.
AC INI-Param: V5PortConfigurationFileURL"
       ::= {acSysHTTPClient 22}



     acSysHTTPClientDataConfigurationFileUrl OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to a data configuration file to be downloaded
from a remote server using the Automatic Update facility.
Access: Offline.
AC INI-Param: RGCONFFILEURL"
       ::= {acSysHTTPClient 23}



     acSysHTTPClientAmdSensitivityFileUrl OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to the AMD Sensitivity file to be downloaded
from a remote server.
Access: Online.
AC INI-Param: AmdSensitivityFileUrl"
       ::= {acSysHTTPClient 24}



     acSysHTTPClientCliScriptFileUrl OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to CLI-Script (show-run configuration) file
to be downloaded from a remote server. Applicable to products
that support CLI.
Access: Online.
AC INI-Param: CLIScriptUrl"
       ::= {acSysHTTPClient 25}



     acSysHTTPClientConfigurationPackageUrlFile OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to Configuration Package file to be downloaded
from a remote server.
Access: Online.
AC INI-Param: ConfPackageUrl"
       ::= {acSysHTTPClient 26}



     acSysHTTPClientIncrementalIniFileURL OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to Incremental Ini File to be downloaded from
a remote server.
Access: Online.
AC INI-Param: IncrementalIniFileURL"
       ::= {acSysHTTPClient 27}



     acSysHTTPClientMTCFirmwareUrlFile OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to a M4K CMP file for targets
 to be downloaded from a remote server.
Access: Online.
AC INI-Param: MTFirmwareUrl "
       ::= {acSysHTTPClient 28}



     acSysHTTPClientVMTFirmwareUrlFile OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Provides a link to a Hosted CMP file for targets
 to be downloaded from a remote server.
Access: Online.
AC INI-Param: VMCFirmwareUrl"
       ::= {acSysHTTPClient 29}



     acSysHTTPClientTLSRootIncrementalFileUrl OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..254))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "URL for downloading a TLS trusted root certificate file using
the Automatic Update facility. This file should be incremental,
the new file will be appended to existing trusted root
records.
Access: Online.
AC INI-Param: TLSIncrRootFileUrl"
       ::= {acSysHTTPClient 30}



     acSysSNMP OBJECT IDENTIFIER ::= {acSysNetworkConfig 9}


     acSysSNMPKeepAliveTrapPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65334)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "The port to which the keep alive traps are sent to.
Access: Instant.
AC INI-Param: KeepAliveTrapPort"
       ::= {acSysSNMP 1}



     acSysSNMPEmsColdStrartIndication OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "EMS object to be used as indication to the device's state in
the 'eyes' of the EMS.
 Default - 0.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysSNMP 2}



     acSysSNMPWanPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter specifies the WAN port number for SNMP requests
and responses. If set to 0, WAN access to SNMP is disabled.

Range = 0 to 65535.
Access: Offline.
AC INI-Param: WanMgmtSnmpPort"
       ::= {acSysSNMP 3}



     acSysSNMPAllowWanSnmp OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables WAN access to the management interface via
SNMP.
Access: Offline.
AC INI-Param: AllowWanSnmp"
       ::= {acSysSNMP 4}



     acSysVLAN OBJECT IDENTIFIER ::= {acSysNetworkConfig 10}


     acSysVLANOamVlanId OBJECT-TYPE
       SYNTAX Unsigned32 (1..4094)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Sets the OAMP (Operation, Administration, Management and Provisioning)
VLAN identifier.

Range:  1 to 4094.
Access: Online.
AC INI-Param: VLANOAMVLANID"
       ::= {acSysVLAN 1}



     acSysVLANControlVlanId OBJECT-TYPE
       SYNTAX Unsigned32 (1..4094)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Sets the control VLAN identifier.

Range: 1 to 4094.
Access: Online.
AC INI-Param: VLANCONTROLVLANID"
       ::= {acSysVLAN 2}



     acSysVLANMediaVlanId OBJECT-TYPE
       SYNTAX Unsigned32 (1..4094)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Sets the media VLAN identifier. 

Range: 1 to 4094.
Access: Online.
AC INI-Param: VLANMEDIAVLANID"
       ::= {acSysVLAN 3}



     acSysVLANNetworkServiceClassPriority OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "This parameter is used to set the priority for Network service
class content. 

Range =  0 to 7
Default = 7.
Access: Online.
AC INI-Param: VLANNETWORKSERVICECLASSPRIORITY"
       ::= {acSysVLAN 4}



     acSysVLANPremiumServiceClassMediaPriority OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Sets the priority for the Premium service class content and
media traffic. 
Range =  0 to 7
Default = 6.
Access: Online.
AC INI-Param: VLANPREMIUMSERVICECLASSMEDIAPRIORITY"
       ::= {acSysVLAN 5}



     acSysVLANGoldServiceClassPriority OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Sets the priority for the Gold service class content.

Range =  0 to 7
Default = 4.
Access: Online.
AC INI-Param: VLANGOLDSERVICECLASSPRIORITY"
       ::= {acSysVLAN 6}



     acSysVLANBronzeServiceClassPriority OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Sets the priority for the Bronze service class content.

Range =  0 to 7
Default = 2.
Access: Online.
AC INI-Param: VLANBRONZESERVICECLASSPRIORITY"
       ::= {acSysVLAN 7}



     acSysVLANPremiumServiceClassControlPriority OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Sets the priority for the Premium service class content and
control traffic. 

Range =  0 to 7
Default = 6.
Access: Online.
AC INI-Param: VLANPREMIUMSERVICECLASSCONTROLPRIORITY"
       ::= {acSysVLAN 8}



     acSysVLANNetworkServiceClassDiffServ OBJECT-TYPE
       SYNTAX Unsigned32 (0..63)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is used to set the DiffServ for Network service
class content.

Range =  0 to 63
Default = 48.
Access: Online.
AC INI-Param: NETWORKSERVICECLASSDIFFSERV"
       ::= {acSysVLAN 9}



     acSysVLANPremiumServiceClassMediaDiffServ OBJECT-TYPE
       SYNTAX Unsigned32 (0..63)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is used to set the DiffServ for Premium service
class content and media traffic.

Range = 0 to 63.
Access: Online.
AC INI-Param: PREMIUMSERVICECLASSMEDIADIFFSERV"
       ::= {acSysVLAN 10}



     acSysVLANPremiumServiceClassControlDiffServ OBJECT-TYPE
       SYNTAX Unsigned32 (0..63)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the DiffServ for the Premium service class content and
control traffic.

Range:  0 to 63.
Access: Online.
AC INI-Param: PREMIUMSERVICECLASSCONTROLDIFFSERV"
       ::= {acSysVLAN 11}



     acSysVLANGoldServiceClassDiffServ OBJECT-TYPE
       SYNTAX Unsigned32 (0..63)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the DiffServ for the Gold service class content.

Range =  0 to 63
Default = 26.
Access: Online.
AC INI-Param: GOLDSERVICECLASSDIFFSERV"
       ::= {acSysVLAN 12}



     acSysVLANBronzeServiceClassDiffServ OBJECT-TYPE
       SYNTAX Unsigned32 (0..63)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the DiffServ for the Bronze service class content.

Range =  0 to 63
Default = 10.
Access: Online.
AC INI-Param: BRONZESERVICECLASSDIFFSERV"
       ::= {acSysVLAN 13}



     acSysVLANVlanNativeVlanId OBJECT-TYPE
       SYNTAX Unsigned32 (1..4094)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the native VLAN identifier.
Access: Online.
AC INI-Param: VLANNATIVEVLANID"
       ::= {acSysVLAN 14}



     acSysVLANMode OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the VLAN functionality.

0 = Disable 
1 = Enable.
Access: Offline.
AC INI-Param: VLANMODE"
       ::= {acSysVLAN 15}



     acSysVLANOsnNativeVlanId OBJECT-TYPE
       SYNTAX Unsigned32 (0..4000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "set the OSN access VLAN.
0  use OAM VLAN ID
1-4000  use specified VLAN ID.
Access: Instant.
AC INI-Param: OSNACCESSVLAN"
       ::= {acSysVLAN 16}



     -- ****************************************
     -- acSysVlanMap table declaration
     -- ****************************************
     acSysVlanMapTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysVlanMapEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysVLAN 21}



     -- ****************************************
     -- acSysVlanMap table entry
     -- ****************************************
     acSysVlanMapEntry OBJECT-TYPE
       SYNTAX AcSysVlanMapEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysVlanMapIndex}
       ::= {acSysVlanMapTable 1}



     -- ****************************************
     -- acSysVlanMap TABLE
     -- ****************************************
     AcSysVlanMapEntry ::= SEQUENCE {
       acSysVlanMapIndex                               Unsigned32,
       acSysVlanMapRowStatus                           RowStatus,
       acSysVlanMapAction                              INTEGER,
       acSysVlanMapActionRes                           INTEGER,
       acSysVlanMapDiffServ                            Unsigned32,
       acSysVlanMapVlanPriority                        Unsigned32
     }



     acSysVlanMapIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..63)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line. Internal parameter.
AC INI-Param: DiffServToVlanPriority_Index"
       ::= {acSysVlanMapEntry 1}



     acSysVlanMapRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysVlanMapEntry 2}



     acSysVlanMapAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysVlanMapEntry 3}



     acSysVlanMapActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysVlanMapEntry 4}



     acSysVlanMapDiffServ OBJECT-TYPE
       SYNTAX Unsigned32 (0..63)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p).
Access: Online.
AC INI-Param: DiffServToVlanPriority_DiffServ"
       ::= {acSysVlanMapEntry 5}



     acSysVlanMapVlanPriority OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p).
Access: Online.
AC INI-Param: DiffServToVlanPriority_VlanPriority"
       ::= {acSysVlanMapEntry 6}



     acSysSCTP OBJECT IDENTIFIER ::= {acSysNetworkConfig 11}


     acSysSCTPHeartBeatInterval OBJECT-TYPE
       SYNTAX Unsigned32 (0..3600)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Defines the SCTP heartbeat interval.

Range: 1 to 3600.
Access: Offline.
AC INI-Param: SCTPHBInterval"
       ::= {acSysSCTP 1}



     acSysSCTPT4SACKTimer OBJECT-TYPE
       SYNTAX Unsigned32 (1..5)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Defines the SCTP T4 SACK timer interval.

Range: 1 to 5.
Access: Offline.
AC INI-Param: SCTPT4SAckTimer"
       ::= {acSysSCTP 2}



     acSysSCTPCheckSumMethod OBJECT-TYPE
       SYNTAX INTEGER {
                  adler(0)
,
                  crc(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Stream Control Transmission Protocol  (SCTP) uses a checksum
mechanism in order to authenticate packets on both sides (the
receiving side and the transmitting side). 

Presently, two checksum mechanisms are available: 

0 = adler32 checksum mechanism
1 = crc32c checksum mechanism (improved mechanism).
Access: Offline.
AC INI-Param: SCTPChecksumMethod"
       ::= {acSysSCTP 3}



     acSysSCTPHostName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "When this parameter is set to any value other than an empty
string, SCTP (Stream Control Transmission Protocol) uses the
value as the value of the FQDN (Fully Qualified Domain Name)
parameter attached to the INIT chunk. In this case, the FQDN
parameter replaces any IP address parameters in the INIT
chunk.

This feature enables overcoming NAT problems where the original
IP addresses belonging to the endpoint supports are converted
into pseudo addresses. When this parameter is not set
(default), the INIT chunk is sent without any FQDN parameter.

Range = String[42].
Access: Offline.
AC INI-Param: SCTPHOSTNAME"
       ::= {acSysSCTP 4}



     acSysSCTPAssociationsNum OBJECT-TYPE
       SYNTAX Unsigned32 (1..8)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Defines the maximum number of Stream Control Transmission Protocol
(SCTP) associations that can be opened.

Range: 1 to 8.
Access: Offline.
AC INI-Param: SCTPAssociationsNum"
       ::= {acSysSCTP 5}



     acSysEthernetPort OBJECT IDENTIFIER ::= {acSysNetworkConfig 12}


     acSysEthernetPortPhyConfiguration OBJECT-TYPE
       SYNTAX INTEGER {
                  halfDuplex10BaseT(0)
,
                  fullDuplex10BaseT(1)
,
                  halfDuplex100BaseT(2)
,
                  fullDuplex100BaseT(3)
,
                  autoNegotiate(4)
,
                  fullDuplex1000BaseT(7)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Controls the Ethernet connection mode type. Auto-negotiate falls
back to Half-Duplex mode (HD) when the opposite port is
not in Auto-negotiate mode. The speed (10 Base-T or 100 Base-TX)
in this mode is always configured correctly.

0 = 10 Base-T half-duplex
1 = 10 Base-T full-duplex
2 = 100 Base-TX half-duplex
3 = 100 Base-TX full-duplex
4 = Auto-negotiate.
Access: Offline.
AC INI-Param: EthernetPhyConfiguration"
       ::= {acSysEthernetPort 1}



     acSysPOE OBJECT IDENTIFIER ::= {acSysEthernetPort 21}


     -- ****************************************
     -- acSysPOE table declaration
     -- ****************************************
     acSysPOETable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysPOEEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysPOE 1}



     -- ****************************************
     -- acSysPOE table entry
     -- ****************************************
     acSysPOEEntry OBJECT-TYPE
       SYNTAX AcSysPOEEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysPOEIndex}
       ::= {acSysPOETable 1}



     -- ****************************************
     -- acSysPOE TABLE
     -- ****************************************
     AcSysPOEEntry ::= SEQUENCE {
       acSysPOEIndex                                   Unsigned32,
       acSysPOERowStatus                               RowStatus,
       acSysPOEAction                                  INTEGER,
       acSysPOEActionRes                               INTEGER,
       acSysPOEPortEnable                              INTEGER,
       acSysPOEPortPower                               Unsigned32,
       acSysPOEPortATEnable                            INTEGER
     }



     acSysPOEIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..11)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "This parameter is used for the Power Over Ethenet (PoE) Index
Field for line. Internal parameter.
AC INI-Param: POETable_Index"
       ::= {acSysPOEEntry 1}



     acSysPOERowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Power Over Ethenet (PoE) ROWSTATUS field for line. Internal
parameter.
Access: Offline.
AC INI-Param: POETable_RowStatus"
       ::= {acSysPOEEntry 2}



     acSysPOEAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Power Over Ethenet (PoE) Mangement Field for ACTIONS. Internal
parameter.
Access: Offline.
AC INI-Param: POETable_Action"
       ::= {acSysPOEEntry 3}



     acSysPOEActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Power Over Ethenet (PoE) Mangement Field for ACTIONS RESULT.
Internal parameter.
AC INI-Param: POETable_ActionRes"
       ::= {acSysPOEEntry 4}



     acSysPOEPortEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "This parameter is used for Power Over Ethenet (PoE) - enable/diasble
port PoE.
Access: Offline.
AC INI-Param: POETable_PortEnable"
       ::= {acSysPOEEntry 5}



     acSysPOEPortPower OBJECT-TYPE
       SYNTAX Unsigned32 (4000..30000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "This parameter is used for Power Over Ethenet (PoE) - Port Power[mW].
Access: Offline.
AC INI-Param: POETable_PortPower"
       ::= {acSysPOEEntry 6}



     acSysPOEPortATEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "This parameter is used to show if working in mode IEEE 802.3AF
(0)  or IEEE 802.3AT (1).
Access: Offline.
AC INI-Param: POETable_PortATEnable"
       ::= {acSysPOEEntry 7}



     acSysNetworkSettings OBJECT IDENTIFIER ::= {acSysNetworkConfig 13}


     acSysNetworkSettingsDisableICMPRedirects OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Disable ICMP Redirect messages. When set to 0 ICMP Redirect
messages are not ignored.
Access: Online.
AC INI-Param: DisableICMPRedirects"
       ::= {acSysNetworkSettings 1}



     acSysNetworkSettingsDisableICMPUnreachable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Disable sending of ICMP unreachable messages.
Access: Online.
AC INI-Param: DisableICMPUnreachable"
       ::= {acSysNetworkSettings 2}



     acSysMiscConfig OBJECT IDENTIFIER ::= {acSystemConfiguration 4}


     acSysDiagnostics OBJECT IDENTIFIER ::= {acSysMiscConfig 1}


     acSysDiagnosticsEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(0)
,
                  builtInTest(1)
,
                  builtInTestwithPartialFlash(2)
,
                  builtInTestWithSDRAM(3)
,
                  builtInTestOnUtopiaVxb(4)
,
                  internalUse(99)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Checks the correct functionality of the different hardware components
on the board. On completion of the check, the board
sends an EV_END_BIT value, which contains information on the
test results of each hardware component.

0 = No diagnostics (default)
1 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN,
PHY and Flash)
2 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN,
PHY, but partial, test of Flash, a quicker mode).
Access: Offline.
AC INI-Param: ENABLEDIAGNOSTICS"
       ::= {acSysDiagnostics 1}



     acSysDiagnosticsEnablePerformanceThresholdAlarms OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter enables sending SNMP traps and Syslog messages
when performance of the device is degraded (according to the
configured thresholds).
Access: Instant.
AC INI-Param: PM_EnableThresholdAlarms"
       ::= {acSysDiagnostics 2}



     acSysDiagnosticsListOfActivitiesToLog OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..35))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines what activities are to be reported by
the device in the form of a log message. Parameter format is
 x,y,z-... where x,y,z are activity codes to be reported by
the device.
Supported activity codes:
PVC - Parameter Value Changes.
AFL - Auxiliary Files Loading.
DR - Device Reset.
FB - Flash Burning.
SWU - SoftWareUpdate.
ARD - Access to Restricted Domains.
NAA - Non Authorized Access.
SPC - Sensitive Parameters Changes.
AE  - Action Executed.
Access: Online.
AC INI-Param: ActivityListToLog"
       ::= {acSysDiagnostics 3}



     acSysGenericINI OBJECT IDENTIFIER ::= {acSysMiscConfig 2}


     acSysGenericINILine OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..512))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Flexible INI file line.
to enter more than one line, use '$@$' between lines.
Access: Offline.
AC INI-Param: N/A"
       ::= {acSysGenericINI 1}



     acSysGenericINISecureStartup OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables secure startup mode. In this mode, downloading
of the INI file is restricted to a URL provided in prior
configuration (see parameter IniFileURL) or via DHCP.
Access: Offline.
AC INI-Param: EnableSecureStartup"
       ::= {acSysGenericINI 2}



     acSysGenericCli OBJECT IDENTIFIER ::= {acSysMiscConfig 3}


     acSysGenericCliCommand OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..512))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "send CLI command.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysGenericCli 1}



     acSysGenericCliCommandResponse OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..512))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "get CLI command response.
AC INI-Param: N/A"
       ::= {acSysGenericCli 2}



     acSysLicenseKey OBJECT IDENTIFIER ::= {acSystemConfiguration 5}


     acSysLicenseKeyString OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..256))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Coded Key specific for board and required features.
Access: Offline.
AC INI-Param: N/A"
       ::= {acSysLicenseKey 1}



     acSysLicenseKeyActiveList OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..484))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "List of all avtivated features.
AC INI-Param: N/A"
       ::= {acSysLicenseKey 2}



     acSysLicenseKeyProductKey OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..40))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Product Key for SSBC.
Access: Instant.
AC INI-Param: ProductKey"
       ::= {acSysLicenseKey 3}



     acSysFile OBJECT IDENTIFIER ::= {acSystemConfiguration 6}


     acSysFileCpt OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Defines Call Progress Tone filenames (downloaded by TFTP).
AC INI-Param: CALLPROGRESSTONESFILENAME"
       ::= {acSysFile 1}



     acSysFileVp OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Defines the name (and path) of the file containing the Voice
Prompts.

Range = String of ASCII characters.
AC INI-Param: VOICEPROMPTSFILENAME"
       ::= {acSysFile 2}



     acSysFilePrerecordedTones OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Defines the name (and path) of the file containing the Prerecorded
Tones.
Range = String of ASCII characters.
AC INI-Param: PrerecordedTonesFileName"
       ::= {acSysFile 3}



     acSysFileXml OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "This parameter is used to indicate the name  of the file containing
the XML file.
AC INI-Param: XMLFileName"
       ::= {acSysFile 4}



     acSysFileExternalCoder OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "This parameter defines the name of an external coders table.
In this table, the user can decide which coders will be used
in the system. The original file is a text file, and it is
converted by DCONVERT to a bynary file.
AC INI-Param: CODERTBLFILENAME"
       ::= {acSysFile 5}



     acSysFileUserInfo OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The file name to be loaded.
AC INI-Param: N/A"
       ::= {acSysFile 6}



     acSysFileDialPlanFileName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "This parameter is used to indicate the name of the file containing
the Dial Plan.
AC INI-Param: gDialPlanFileName"
       ::= {acSysFile 7}



     acSysFileTLSPkeyFileName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "This parameter defines the name of a private key file (internal).
Set to blank to regenerate the key and certificate.
AC INI-Param: HTTPSPkeyFileName"
       ::= {acSysFile 8}



     acSysFileTLSCertFileName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Defines the name of the HTTPS server certificate file to be
downloaded via TFTP. The file must be in base64-encoded PEM
format.
Range = String[47].
AC INI-Param: HTTPSCertFileName"
       ::= {acSysFile 9}



     acSysFileTLSRootFileName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Defines the name of the HTTPS trusted root certificate file
to be downloaded via TFTP. The file must be in base64-encoded
PEM format.
Range = String[47].
AC INI-Param: HTTPSRootFileName"
       ::= {acSysFile 10}



     acSysFileFirstVideoFontFileName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Indicates the name of the first file containing the Video Font
file index.
AC INI-Param: VideoFontFIleName"
       ::= {acSysFile 11}



     acSysFileSecondVideoFontFileName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Indicates the name of the second file containing the Video Font
file index.
AC INI-Param: VideoFontFIleName"
       ::= {acSysFile 12}



     acSysFileThirdVideoFontFileName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Indicates the name of the first file containing the Video Font
file index.
AC INI-Param: VideoFontFIleName"
       ::= {acSysFile 13}



     acSysFileV5PortConfFileName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Indicates the name and location of the V5 Port Configuration
file.
AC INI-Param: V5PortConfigurationFileName"
       ::= {acSysFile 14}



     acSysFileAmdSensitivityFileName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..47))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Name of the AMD Sensitivity auxiliary file.
AC INI-Param: AmdSensitivityFileName"
       ::= {acSysFile 15}



     acSysSecurity OBJECT IDENTIFIER ::= {acSystemConfiguration 7}


     acSysSecurityTLSVersion OBJECT-TYPE
       SYNTAX INTEGER {
                  sSL-2-3-and-TLS-1(0)
,
                  tLS-1-only(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines the supported versions of SSL/TLS. 
When set to 0, SSL/TLS handshakes always start with SSL 2.0
and switch to TLS 1.0 if both peers support it. 
When set to 1, TLS 1.0 is the only version supported
 clients attempting to contact the device using SSL 2.0 will
be rejected.

Possible values:
0 = SSL 2.0, SSL 3.0, and TLS 1.0 are supported (default)
1 = TLS 1.0 will always be used.
Access: Online.
AC INI-Param: TLSVersion"
       ::= {acSysSecurity 1}



     acSysSecurityOcspEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(0)
,
                  enabled(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables certificate checking via OCSP.
Access: Instant.
AC INI-Param: OcspEnable"
       ::= {acSysSecurity 2}



     acSysSecurityOcspServerIPType OBJECT-TYPE
       SYNTAX InetAddressType
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines the OCSP server's IP address Type.
0 - unknown
1 - IPv4
2 - IPv6.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysSecurity 3}



     acSysSecurityOcspServerIP OBJECT-TYPE
       SYNTAX InetAddress
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines the OCSP server's IP address.
Range = Legal IP address.
Access: Instant.
AC INI-Param: OcspServerIP"
       ::= {acSysSecurity 4}



     acSysSecurityOcspServerPort OBJECT-TYPE
       SYNTAX Unsigned32 (1..32767)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines the OCSP server's TCP port number.
Range = 1 to 32767.
Access: Instant.
AC INI-Param: OcspServerPort"
       ::= {acSysSecurity 5}



     acSysSecurityOcspDefaultResponse OBJECT-TYPE
       SYNTAX INTEGER {
                  rejectPeerCertificate(0)
,
                  allowPeerCertificate(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines default OCSP behavior when the server cannot be contacted.
0 = reject peer certificate.
1 = allow peer certificate.
.
Access: Instant.
AC INI-Param: OcspDefaultResponse"
       ::= {acSysSecurity 6}



     acSysSecurityTLSFIPS140Mode OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(0)
,
                  enabled(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines whether to enable the FIPS140 mode for TLS.
Access: Offline.
AC INI-Param: TLS_Fips140_Mode"
       ::= {acSysSecurity 7}



     acSysSecurityGenCsrSubjectName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..1200))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "generate CSR Subject Name.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysSecurity 8}



     acSysSecuritySelfSignedCertificateSubjectName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..64))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysSecurity 9}



     acSysSecurityOcspSecondaryServerIPType OBJECT-TYPE
       SYNTAX InetAddressType
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines the OCSP secondary server's IP address
Type.
0 - unknown
1 - IPv4
2 - IPv6.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysSecurity 10}



     acSysSecurityOcspSecondaryServerIP OBJECT-TYPE
       SYNTAX InetAddress
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter defines the OCSP secondary server IP address.
Range = Legal IP address.
Access: Instant.
AC INI-Param: OcspSecondaryServerIP"
       ::= {acSysSecurity 11}



     acSysSecurityHTTPSRequireClientCertificate OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Requires client certificates for HTTPS connection.
The client certificate must be preloaded on the gateway, and
its matching private key must be installed on the managing
computer.
Time and date must be correctly set on the gateway, for the
client certificate to be verified.
Access: Online.
AC INI-Param: HTTPSRequireClientCertificate"
       ::= {acSysSecurity 12}



     acSysSecurityAUPDVerifyCertificates OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter configures the AutoUpdate facility to verify
server certificates when using HTTPS.
Access: Online.
AC INI-Param: AUPDVerifyCertificates"
       ::= {acSysSecurity 13}



     acSysSecurityRequireStrictCertification OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Verify the certification strictly - for SSL.
Access: Online.
AC INI-Param: RequireStrictCert"
       ::= {acSysSecurity 14}



     acSysSecurityTLSExpiryCheckStart OBJECT-TYPE
       SYNTAX Unsigned32 (0..3650)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "The system will report when the TLS server certificate is about
to expire within this number of days.
Access: Instant.
AC INI-Param: TLSExpiryCheckStart"
       ::= {acSysSecurity 15}



     acSysSecurityTLSExpiryCheckPeriod OBJECT-TYPE
       SYNTAX Unsigned32 (1..3650)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines how often the system will check for TLS server certificate
expiry (in days).
Access: Instant.
AC INI-Param: TLSExpiryCheckPeriod"
       ::= {acSysSecurity 16}



     acSysIKE OBJECT IDENTIFIER ::= {acSysSecurity 21}


     -- ****************************************
     -- acSysIKEPolicy table declaration
     -- ****************************************
     acSysIKEPolicyTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysIKEPolicyEntry
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           ""
       ::= {acSysIKE 1}



     -- ****************************************
     -- acSysIKEPolicy table entry
     -- ****************************************
     acSysIKEPolicyEntry OBJECT-TYPE
       SYNTAX AcSysIKEPolicyEntry
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           ""
       INDEX {acSysIKEPolicyIndex}
       ::= {acSysIKEPolicyTable 1}



     -- ****************************************
     -- acSysIKEPolicy TABLE
     -- ****************************************
     AcSysIKEPolicyEntry ::= SEQUENCE {
       acSysIKEPolicyIndex                             Unsigned32,
       acSysIKEPolicyRowStatus                         RowStatus,
       acSysIKEPolicyAction                            INTEGER,
       acSysIKEPolicyActionRes                         INTEGER,
       acSysIKEPolicyShardKey                          SnmpAdminString,
       acSysIKEPolicyLifeInSeconds                     Unsigned32,
       acSysIKEPolicyLifeInKB                          Unsigned32,
       acSysIKEPolicyProposal0Encryption               INTEGER,
       acSysIKEPolicyProposal1Encryption               INTEGER,
       acSysIKEPolicyProposal2Encryption               INTEGER,
       acSysIKEPolicyProposal3Encryption               INTEGER,
       acSysIKEPolicyProposal0Authentication           INTEGER,
       acSysIKEPolicyProposal1Authentication           INTEGER,
       acSysIKEPolicyProposal2Authentication           INTEGER,
       acSysIKEPolicyProposal3Authentication           INTEGER,
       acSysIKEPolicyProposal0DHGroup                  INTEGER,
       acSysIKEPolicyProposal1DHGroup                  INTEGER,
       acSysIKEPolicyProposal2DHGroup                  INTEGER,
       acSysIKEPolicyProposal3DHGroup                  INTEGER,
       acSysIKEPolicyAuthenticationMethod              INTEGER
     }



     acSysIKEPolicyIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..19)
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for the Internet Key Encryption (IKE)
Index Field for line. Internal parameter.
AC INI-Param: IKE_DB_INDEX"
       ::= {acSysIKEPolicyEntry 1}



     acSysIKEPolicyRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for the Internet Key Encryption (IKE)
ROWSTATUS Field for line. Internal parameter.
AC INI-Param: IKE_DB_ROWSTATUS"
       ::= {acSysIKEPolicyEntry 2}



     acSysIKEPolicyAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for the Internet Key Encryption (IKE)
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: IKE_DB_ACTION"
       ::= {acSysIKEPolicyEntry 3}



     acSysIKEPolicyActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for the Internet Key Encryption (IKE)
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: IKE_DB_ACTION_RESULT"
       ::= {acSysIKEPolicyEntry 4}



     acSysIKEPolicyShardKey OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..80))
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Shared Key.
Access: Instant.
AC INI-Param: IKEPOLICYSHAREDKEY"
       ::= {acSysIKEPolicyEntry 5}



     acSysIKEPolicyLifeInSeconds OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - IKE SA LifeTime in seconds.
Access: Instant.
AC INI-Param: IKEPOLICYLIFEINSEC"
       ::= {acSysIKEPolicyEntry 6}



     acSysIKEPolicyLifeInKB OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - IKE SA LifeTime in KB.
Access: Instant.
AC INI-Param: IKEPOLICYLIFEINKB"
       ::= {acSysIKEPolicyEntry 7}



     acSysIKEPolicyProposal0Encryption OBJECT-TYPE
       SYNTAX INTEGER {
                  dES-CBC(1)
,
                  triple-DES-CBC(2)
,
                  aES(3)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 0 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_0"
       ::= {acSysIKEPolicyEntry 8}



     acSysIKEPolicyProposal1Encryption OBJECT-TYPE
       SYNTAX INTEGER {
                  dES-CBC(1)
,
                  triple-DES-CBC(2)
,
                  aES(3)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 1 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_1"
       ::= {acSysIKEPolicyEntry 9}



     acSysIKEPolicyProposal2Encryption OBJECT-TYPE
       SYNTAX INTEGER {
                  dES-CBC(1)
,
                  triple-DES-CBC(2)
,
                  aES(3)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 2 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_2"
       ::= {acSysIKEPolicyEntry 10}



     acSysIKEPolicyProposal3Encryption OBJECT-TYPE
       SYNTAX INTEGER {
                  dES-CBC(1)
,
                  triple-DES-CBC(2)
,
                  aES(3)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 3 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_3"
       ::= {acSysIKEPolicyEntry 11}



     acSysIKEPolicyProposal0Authentication OBJECT-TYPE
       SYNTAX INTEGER {
                  hMAC-SHA-1-96(2)
,
                  hMAC-MD5-96(4)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_0"
       ::= {acSysIKEPolicyEntry 12}



     acSysIKEPolicyProposal1Authentication OBJECT-TYPE
       SYNTAX INTEGER {
                  hMAC-SHA-1-96(2)
,
                  hMAC-MD5-96(4)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 1 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_1"
       ::= {acSysIKEPolicyEntry 13}



     acSysIKEPolicyProposal2Authentication OBJECT-TYPE
       SYNTAX INTEGER {
                  hMAC-SHA-1-96(2)
,
                  hMAC-MD5-96(4)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 2 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_2"
       ::= {acSysIKEPolicyEntry 14}



     acSysIKEPolicyProposal3Authentication OBJECT-TYPE
       SYNTAX INTEGER {
                  hMAC-SHA-1-96(2)
,
                  hMAC-MD5-96(4)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 3 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_3"
       ::= {acSysIKEPolicyEntry 15}



     acSysIKEPolicyProposal0DHGroup OBJECT-TYPE
       SYNTAX INTEGER {
                  dH-786-BIT(0)
,
                  dH-1024-BIT(1)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 0 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_0"
       ::= {acSysIKEPolicyEntry 16}



     acSysIKEPolicyProposal1DHGroup OBJECT-TYPE
       SYNTAX INTEGER {
                  dH-786-BIT(0)
,
                  dH-1024-BIT(1)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 1 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_1"
       ::= {acSysIKEPolicyEntry 17}



     acSysIKEPolicyProposal2DHGroup OBJECT-TYPE
       SYNTAX INTEGER {
                  dH-786-BIT(0)
,
                  dH-1024-BIT(1)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 2 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_2"
       ::= {acSysIKEPolicyEntry 18}



     acSysIKEPolicyProposal3DHGroup OBJECT-TYPE
       SYNTAX INTEGER {
                  dH-786-BIT(0)
,
                  dH-1024-BIT(1)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IKE Policy - Proposal 3 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_3"
       ::= {acSysIKEPolicyEntry 19}



     acSysIKEPolicyAuthenticationMethod OBJECT-TYPE
       SYNTAX INTEGER {
                  presharedKey(0)
,
                  rsaSignature(1)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for Internet Key Encryption (IKE) Policy
- IKE Authentication Method (Preshared key/ RSA).
Access: Offline.
AC INI-Param: IKEPOLICYAUTHENTICATIONMETHOD"
       ::= {acSysIKEPolicyEntry 20}



     acSysIPSec OBJECT IDENTIFIER ::= {acSysSecurity 22}


     acSysIPSecEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  no(0)
,
                  yes(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "IPsec Enable flag.
Access: Offline.
AC INI-Param: ENABLEIPSEC"
       ::= {acSysIPSec 1}



     acSysIPSecDpdMode OBJECT-TYPE
       SYNTAX INTEGER {
                   disabled(0)
,
                  periodic(1)
,
                  ondemand(2)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "IPsec Dead Peer Detection (RFC 3706) - Mode of Operation.
One of the following values: '0' - Disabled (Default)
 '1' - Periodic
 '2' - On demand.
Access: Instant.
AC INI-Param: IPSECDPDMODE"
       ::= {acSysIPSec 2}



     acSysIPSecIKECertificateExtValidate OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(0)
,
                  enabled(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Enables or disables certificate extension checking for IKE.
Access: Instant.
AC INI-Param: IKEcertificateExtValidate"
       ::= {acSysIPSec 3}



     -- ****************************************
     -- acSysIPSecSPD table declaration
     -- ****************************************
     acSysIPSecSPDTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysIPSecSPDEntry
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           ""
       ::= {acSysIPSec 21}



     -- ****************************************
     -- acSysIPSecSPD table entry
     -- ****************************************
     acSysIPSecSPDEntry OBJECT-TYPE
       SYNTAX AcSysIPSecSPDEntry
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           ""
       INDEX {acSysIPSecSPDIndex}
       ::= {acSysIPSecSPDTable 1}



     -- ****************************************
     -- acSysIPSecSPD TABLE
     -- ****************************************
     AcSysIPSecSPDEntry ::= SEQUENCE {
       acSysIPSecSPDIndex                              Unsigned32,
       acSysIPSecSPDRowStatus                          RowStatus,
       acSysIPSecSPDAction                             INTEGER,
       acSysIPSecSPDActionRes                          INTEGER,
       acSysIPSecSPDPolicyRemoteIPAddr                 SnmpAdminString,
       acSysIPSecSPDPolicySrcPort                      Unsigned32,
       acSysIPSecSPDPolicyDestPort                     Unsigned32,
       acSysIPSecSPDPolicyProtocol                     Unsigned32,
       acSysIPSecSPDKeyExchangeMethodIndex             Unsigned32,
       acSysIPSecSPDLifeInSeconds                      Unsigned32,
       acSysIPSecSPDLifeInKB                           Unsigned32,
       acSysIPSecSPDProposal0Encryption                INTEGER,
       acSysIPSecSPDProposal1Encryption                INTEGER,
       acSysIPSecSPDProposal2Encryption                INTEGER,
       acSysIPSecSPDProposal3Encryption                INTEGER,
       acSysIPSecSPDProposal0Authentication            INTEGER,
       acSysIPSecSPDProposal1Authentication            INTEGER,
       acSysIPSecSPDProposal2Authentication            INTEGER,
       acSysIPSecSPDProposal3Authentication            INTEGER,
       acSysIPSecSPDPolicyLocalIPAddrType              INTEGER,
       acSysIPSecSPDMode                               INTEGER,
       acSysIPSecSPDPolicyRemoteTunnelIPAddress        IpAddress,
       acSysIPSecSPDPolicyLocalTunnelIPAddress         IpAddress,
       acSysIPSecSPDPolicyRemoteTunnelSubnetMask       IpAddress
     }



     acSysIPSecSPDIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..19)
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           "Security Policy Database (SPD) Index Field for line. Internal
parameter.
AC INI-Param: SPD_INDEX"
       ::= {acSysIPSecSPDEntry 1}



     acSysIPSecSPDRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Security Policy Database (SPD) ROWSTATUS field for line. Internal
parameter.
AC INI-Param: SPD_ROWSTATUS"
       ::= {acSysIPSecSPDEntry 2}



     acSysIPSecSPDAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Security Policy Database (SPD) Mangement Field for ACTIONS.
Internal parameter.
AC INI-Param: SPD_ACTION"
       ::= {acSysIPSecSPDEntry 3}



     acSysIPSecSPDActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS obsolete
       DESCRIPTION
           "Security Policy Database (SPD) Mangement Field for ACTIONS RESULT.
Internal parameter.
AC INI-Param: SPD_ACTION_RESULT"
       ::= {acSysIPSecSPDEntry 4}



     acSysIPSecSPDPolicyRemoteIPAddr OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..99))
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Remote IP address as IP or Host Name.
Access: Instant.
AC INI-Param: IPSECPOLICYREMOTEIPADDRESS"
       ::= {acSysIPSecSPDEntry 5}



     acSysIPSecSPDPolicySrcPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65536)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Source Port.
Access: Instant.
AC INI-Param: IPSECPOLICYSRCPORT"
       ::= {acSysIPSecSPDEntry 6}



     acSysIPSecSPDPolicyDestPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65536)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Destination Port.
Access: Instant.
AC INI-Param: IPSECPOLICYDSTPORT"
       ::= {acSysIPSecSPDEntry 7}



     acSysIPSecSPDPolicyProtocol OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Protocol.
Access: Instant.
AC INI-Param: IPSECPOLICYPROTOCOL"
       ::= {acSysIPSecSPDEntry 8}



     acSysIPSecSPDKeyExchangeMethodIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for the Secure Internet Protocol (IPsec)
Policy - Index into the Key Exchange Method Table (IKE Table).
Access: Offline.
AC INI-Param: IPSECPOLICYKEYEXCHANGEMETHODINDEX"
       ::= {acSysIPSecSPDEntry 9}



     acSysIPSecSPDLifeInSeconds OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IPsec Policy - IPSec SA LifeTime in seconds.
Access: Instant.
AC INI-Param: IPSECPOLICYLIFEINSEC"
       ::= {acSysIPSecSPDEntry 10}



     acSysIPSecSPDLifeInKB OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IPsec Policy - IPSec SA LifeTime in KB.
Access: Instant.
AC INI-Param: IPSECPOLICYLIFEINKB"
       ::= {acSysIPSecSPDEntry 11}



     acSysIPSecSPDProposal0Encryption OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  dES-CBC(1)
,
                  triple-DES-CBC(2)
,
                  aES(3)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IPsec Policy - Proposal 0 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_0"
       ::= {acSysIPSecSPDEntry 12}



     acSysIPSecSPDProposal1Encryption OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  dES-CBC(1)
,
                  triple-DES-CBC(2)
,
                  aES(3)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IPsec Policy - Proposal 1 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_1"
       ::= {acSysIPSecSPDEntry 13}



     acSysIPSecSPDProposal2Encryption OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  dES-CBC(1)
,
                  triple-DES-CBC(2)
,
                  aES(3)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IPsec Policy - Proposal 2 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_2"
       ::= {acSysIPSecSPDEntry 14}



     acSysIPSecSPDProposal3Encryption OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  dES-CBC(1)
,
                  triple-DES-CBC(2)
,
                  aES(3)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IPsec Policy - Proposal 3 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_3"
       ::= {acSysIPSecSPDEntry 15}



     acSysIPSecSPDProposal0Authentication OBJECT-TYPE
       SYNTAX INTEGER {
                  hMAC-SHA-1-96(2)
,
                  hMAC-MD5-96(4)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_0"
       ::= {acSysIPSecSPDEntry 16}



     acSysIPSecSPDProposal1Authentication OBJECT-TYPE
       SYNTAX INTEGER {
                  hMAC-SHA-1-96(2)
,
                  hMAC-MD5-96(4)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_1"
       ::= {acSysIPSecSPDEntry 17}



     acSysIPSecSPDProposal2Authentication OBJECT-TYPE
       SYNTAX INTEGER {
                  hMAC-SHA-1-96(2)
,
                  hMAC-MD5-96(4)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_2"
       ::= {acSysIPSecSPDEntry 18}



     acSysIPSecSPDProposal3Authentication OBJECT-TYPE
       SYNTAX INTEGER {
                  hMAC-SHA-1-96(2)
,
                  hMAC-MD5-96(4)
,
                  not-set(10)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_3"
       ::= {acSysIPSecSPDEntry 19}



     acSysIPSecSPDPolicyLocalIPAddrType OBJECT-TYPE
       SYNTAX INTEGER {
                  oam(0)
,
                  control(2)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for Secure Internet Protocol (IPsec)
Policy - Local IP address type (OAM/Control).
Access: Offline.
AC INI-Param: IPSECPOLICYLOCALIPADDRESSTYPE"
       ::= {acSysIPSecSPDEntry 20}



     acSysIPSecSPDMode OBJECT-TYPE
       SYNTAX INTEGER {
                  transport(0)
,
                  tunneling(1)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for Secure Internet Protocol (IPsec)
Policy - Mode of Operation (Transport/Tunneling). '0' - Transport
 '1' - Tunneling.
Access: Instant.
AC INI-Param: IPSECMODE"
       ::= {acSysIPSecSPDEntry 21}



     acSysIPSecSPDPolicyRemoteTunnelIPAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for Secure Internet Protocol (IPsec)
Policy - IP Address of the Remote IPSec Tunnel Endpoint.
Access: Instant.
AC INI-Param: IPSECPOLICYREMOTETUNNELIPADDRESS"
       ::= {acSysIPSecSPDEntry 22}



     acSysIPSecSPDPolicyLocalTunnelIPAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for Secure Internet Protocol (IPsec)
Policy - IP Address of the Remote IPSec Tunnel Endpoint.
Access: Instant.
AC INI-Param: IPSECPOLICYLOCALTUNNELIPADDRESS"
       ::= {acSysIPSecSPDEntry 23}



     acSysIPSecSPDPolicyRemoteTunnelSubnetMask OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "This parameter is used for Secure Internet Protocol (IPsec)
Policy - Subnet Mask of the Remote IPSec Address.
Access: Instant.
AC INI-Param: IPSECPOLICYREMOTESUBNETMASK"
       ::= {acSysIPSecSPDEntry 24}



     -- ****************************************
     -- acSysIPsecProposal table declaration
     -- ****************************************
     acSysIPsecProposalTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysIPsecProposalEntry
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           "IPsec Proposal table"
       ::= {acSysIPSec 22}



     -- ****************************************
     -- acSysIPsecProposal table entry
     -- ****************************************
     acSysIPsecProposalEntry OBJECT-TYPE
       SYNTAX AcSysIPsecProposalEntry
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           ""
       INDEX {acSysIPsecProposalIndex}
       ::= {acSysIPsecProposalTable 1}



     -- ****************************************
     -- acSysIPsecProposal TABLE
     -- ****************************************
     AcSysIPsecProposalEntry ::= SEQUENCE {
       acSysIPsecProposalIndex                         Unsigned32,
       acSysIPsecProposalRowStatus                     RowStatus,
       acSysIPsecProposalAction                        INTEGER,
       acSysIPsecProposalActionRes                     INTEGER,
       acSysIPsecProposalEncryptionAlgorithm           INTEGER,
       acSysIPsecProposalAuthenticationAlgorithm       INTEGER,
       acSysIPsecProposalDiffieHellmanGroup            INTEGER
     }



     acSysIPsecProposalIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..4)
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           "Index Field for line.
AC INI-Param: IPsecProposalTable_Index"
       ::= {acSysIPsecProposalEntry 1}



     acSysIPsecProposalRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "ROWSTATUS Field for line.
AC INI-Param: IPsecProposalTable_RowStatus"
       ::= {acSysIPsecProposalEntry 2}



     acSysIPsecProposalAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Mangement Field for ACTIONS.
AC INI-Param: IPsecProposalTable_Action"
       ::= {acSysIPsecProposalEntry 3}



     acSysIPsecProposalActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS obsolete
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT.
AC INI-Param: IPsecProposalTable_ActionRes"
       ::= {acSysIPsecProposalEntry 4}



     acSysIPsecProposalEncryptionAlgorithm OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  desCbc(1)
,
                  tripleDesCbc(2)
,
                  aes(3)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Selects the encryption (privacy) algorithm to use.
Access: Online.
AC INI-Param: IPsecProposalTable_EncryptionAlgorithm"
       ::= {acSysIPsecProposalEntry 5}



     acSysIPsecProposalAuthenticationAlgorithm OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  hmacSha1-96(2)
,
                  hmacMd5-96(4)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Selects the message authentication (integrity) algorithm to
use.
Access: Online.
AC INI-Param: IPsecProposalTable_AuthenticationAlgorithm"
       ::= {acSysIPsecProposalEntry 6}



     acSysIPsecProposalDiffieHellmanGroup OBJECT-TYPE
       SYNTAX INTEGER {
                  group1-768Bits(0)
,
                  group2-1024Bits(1)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Selects the Diffie-Hellman group to use.
Access: Online.
AC INI-Param: IPsecProposalTable_DHGroup"
       ::= {acSysIPsecProposalEntry 7}



     -- ****************************************
     -- acSysIPsecSA table declaration
     -- ****************************************
     acSysIPsecSATable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysIPsecSAEntry
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           "IPsec SA table"
       ::= {acSysIPSec 23}



     -- ****************************************
     -- acSysIPsecSA table entry
     -- ****************************************
     acSysIPsecSAEntry OBJECT-TYPE
       SYNTAX AcSysIPsecSAEntry
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           ""
       INDEX {acSysIPsecSAIndex}
       ::= {acSysIPsecSATable 1}



     -- ****************************************
     -- acSysIPsecSA TABLE
     -- ****************************************
     AcSysIPsecSAEntry ::= SEQUENCE {
       acSysIPsecSAIndex                               Unsigned32,
       acSysIPsecSARowStatus                           RowStatus,
       acSysIPsecSAAction                              Unsigned32,
       acSysIPsecSAActionRes                           Unsigned32,
       acSysIPsecSARemoteEndpointAddress               SnmpAdminString,
       acSysIPsecSAAuthenticationMethod                INTEGER,
       acSysIPsecSASharedKey                           SnmpAdminString,
       acSysIPsecSASourcePort                          Unsigned32,
       acSysIPsecSADestPort                            Unsigned32,
       acSysIPsecSAProtocol                            Unsigned32,
       acSysIPsecSAPhase1SaLifetimeInSec               Unsigned32,
       acSysIPsecSAPhase2SaLifetimeInSec               Unsigned32,
       acSysIPsecSAPhase2SaLifetimeInKB                Unsigned32,
       acSysIPsecSADPDmode                             INTEGER,
       acSysIPsecSAIPsecMode                           INTEGER,
       acSysIPsecSARemoteTunnelAddress                 SnmpAdminString,
       acSysIPsecSARemoteSubnetIPAddress               SnmpAdminString,
       acSysIPsecSARemoteSubnetPrefixLength            Unsigned32,
       acSysIPsecSAInterfaceName                       RowPointer
     }



     acSysIPsecSAIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..20)
       MAX-ACCESS not-accessible
       STATUS obsolete
       DESCRIPTION
           "Index Field for line.
AC INI-Param: IPsecSATable_Index"
       ::= {acSysIPsecSAEntry 1}



     acSysIPsecSARowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "ROWSTATUS Field for line.
AC INI-Param: IPsecSATable_RowStatus"
       ::= {acSysIPsecSAEntry 2}



     acSysIPsecSAAction OBJECT-TYPE
       SYNTAX Unsigned32 (0..0)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Mangement Field for ACTIONS.
AC INI-Param: IPsecSATable_Action"
       ::= {acSysIPsecSAEntry 3}



     acSysIPsecSAActionRes OBJECT-TYPE
       SYNTAX Unsigned32 (0..0)
       MAX-ACCESS read-only
       STATUS obsolete
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT.
AC INI-Param: IPsecSATable_ActionRes"
       ::= {acSysIPsecSAEntry 4}



     acSysIPsecSARemoteEndpointAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..98))
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IP address or DNS host name of the peer.
Access: Online.
AC INI-Param: IPsecSATable_RemoteEndpointAddressOrName"
       ::= {acSysIPsecSAEntry 5}



     acSysIPsecSAAuthenticationMethod OBJECT-TYPE
       SYNTAX INTEGER {
                  presharedKey(0)
,
                  rSASignature(1)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Selects the method used for peer authentication during IKE main
mode.
Access: Online.
AC INI-Param: IPsecSATable_AuthenticationMethod"
       ::= {acSysIPsecSAEntry 6}



     acSysIPsecSASharedKey OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..79))
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Defines the pre-shared key (in textual format).
Access: Online.
AC INI-Param: IPsecSATable_SharedKey"
       ::= {acSysIPsecSAEntry 7}



     acSysIPsecSASourcePort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Defines the source port to which this configuration applies.
Access: Online.
AC INI-Param: IPsecSATable_SourcePort"
       ::= {acSysIPsecSAEntry 8}



     acSysIPsecSADestPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Defines the destination port to which this configuration applies.
Access: Online.
AC INI-Param: IPsecSATable_DestPort"
       ::= {acSysIPsecSAEntry 9}



     acSysIPsecSAProtocol OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Defines the protocol type to which this configuration applies.
Standard IP protocol numbers should be used, e.g.:
0 = Any protocol (default)
17 = UDP
6 = TCP
.
Access: Online.
AC INI-Param: IPsecSATable_Protocol"
       ::= {acSysIPsecSAEntry 10}



     acSysIPsecSAPhase1SaLifetimeInSec OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Determines the duration (in seconds) for which the negotiated
IKE SA (main mode) is valid. After the time expires, the SA
is re-negotiated.
Access: Online.
AC INI-Param: IPsecSATable_Phase1SaLifetimeInSec"
       ::= {acSysIPsecSAEntry 11}



     acSysIPsecSAPhase2SaLifetimeInSec OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Determines the duration (in seconds) for which the negotiated
IPSec SA (quick mode) is valid. After the time expires, the
SA is re-negotiated.
Access: Online.
AC INI-Param: IPsecSATable_Phase2SaLifetimeInSec"
       ::= {acSysIPsecSAEntry 12}



     acSysIPsecSAPhase2SaLifetimeInKB OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Determines the maximum volume of traffic (in kilobytes) for
which the negotiated IPSec SA (quick mode) is valid.
Access: Online.
AC INI-Param: IPsecSATable_Phase2SaLifetimeInKB"
       ::= {acSysIPsecSAEntry 13}



     acSysIPsecSADPDmode OBJECT-TYPE
       SYNTAX INTEGER {
                  dPDDisabled(0)
,
                  dPDPeriodic(1)
,
                  dPDOnDemand(2)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Controls dead peer detection (DPD) as per RFC 3706.
Access: Online.
AC INI-Param: IPsecSATable_DPDmode"
       ::= {acSysIPsecSAEntry 14}



     acSysIPsecSAIPsecMode OBJECT-TYPE
       SYNTAX INTEGER {
                  transport(0)
,
                  tunnel(1)

                  }
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Selects the IPSec mode of operation.
0 = Transport mode (default)
1 = Tunnel mode
.
Access: Online.
AC INI-Param: IPsecSATable_IPsecMode"
       ::= {acSysIPsecSAEntry 15}



     acSysIPsecSARemoteTunnelAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IP address of the peer router.
Access: Online.
AC INI-Param: IPsecSATable_RemoteTunnelAddress"
       ::= {acSysIPsecSAEntry 16}



     acSysIPsecSARemoteSubnetIPAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "IP address of the remote subnetwork.
Access: Online.
AC INI-Param: IPsecSATable_RemoteSubnetIPAddress"
       ::= {acSysIPsecSAEntry 17}



     acSysIPsecSARemoteSubnetPrefixLength OBJECT-TYPE
       SYNTAX Unsigned32 (0..128)
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Prefix length of the Remote Subnet IP Address parameter (in
bits).
Access: Online.
AC INI-Param: IPsecSATable_RemoteSubnetPrefixLength"
       ::= {acSysIPsecSAEntry 18}



     acSysIPsecSAInterfaceName OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Select the OID of the interface name corresponding to the one
appearing in the interface table.
The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11.
acSysInterfaceIndex
Note: when ignore a default value will be SET: 0.0.
Access: Online.
AC INI-Param: IPsecSATable_InterfaceName"
       ::= {acSysIPsecSAEntry 19}



     acFirewall OBJECT IDENTIFIER ::= {acSysSecurity 23}


     -- ****************************************
     -- acSysAccessList table declaration
     -- ****************************************
     acSysAccessListTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysAccessListEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acFirewall 1}



     -- ****************************************
     -- acSysAccessList table entry
     -- ****************************************
     acSysAccessListEntry OBJECT-TYPE
       SYNTAX AcSysAccessListEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysAccessListIndex}
       ::= {acSysAccessListTable 1}



     -- ****************************************
     -- acSysAccessList TABLE
     -- ****************************************
     AcSysAccessListEntry ::= SEQUENCE {
       acSysAccessListIndex                            Unsigned32,
       acSysAccessListRowStatus                        RowStatus,
       acSysAccessListAction                           INTEGER,
       acSysAccessListActionRes                        INTEGER,
       acSysAccessListSourceIP                         SnmpAdminString,
       acSysAccessListNetMask                          IpAddress,
       acSysAccessListStartPort                        Unsigned32,
       acSysAccessListEndPort                          Unsigned32,
       acSysAccessListProtocol                         SnmpAdminString,
       acSysAccessListPacketSize                       Unsigned32,
       acSysAccessListByteRate                         Unsigned32,
       acSysAccessListByteBurst                        Unsigned32,
       acSysAccessListAllowType                        INTEGER,
       acSysAccessListMatchCount                       Unsigned32,
       acSysAccessListInterfaceName                    SnmpAdminString,
       acSysAccessListUseSpecificInterface             INTEGER,
       acSysAccessListSourcePort                       Unsigned32,
       acSysAccessListPrefixLength                     Unsigned32
     }



     acSysAccessListIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..49)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line. Internal parameter.
AC INI-Param: ACCESSLIST_Index"
       ::= {acSysAccessListEntry 1}



     acSysAccessListRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysAccessListEntry 2}



     acSysAccessListAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysAccessListEntry 3}



     acSysAccessListActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysAccessListEntry 4}



     acSysAccessListSourceIP OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..60))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Source IP for access rule.
Access: Online.
AC INI-Param: ACCESSLIST_Source_IP"
       ::= {acSysAccessListEntry 5}



     acSysAccessListNetMask OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-create
       STATUS obsolete
       DESCRIPTION
           "Mask for this access rule (bitwise ANDed with the source IP
of the packet).
Access: Online.
AC INI-Param: ACCESSLIST_Net_Mask"
       ::= {acSysAccessListEntry 6}



     acSysAccessListStartPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Port range - start.
Access: Online.
AC INI-Param: ACCESSLIST_Start_Port"
       ::= {acSysAccessListEntry 7}



     acSysAccessListEndPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Port range - end.
Access: Online.
AC INI-Param: ACCESSLIST_End_Port"
       ::= {acSysAccessListEntry 8}



     acSysAccessListProtocol OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..10))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "IP user-level protocol (TCP, UDP, ICMP, ESP, SIP, MGCP, TPNCP,
ANY or numeric value).
Access: Online.
AC INI-Param: ACCESSLIST_Protocol"
       ::= {acSysAccessListEntry 9}



     acSysAccessListPacketSize OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Maximum packet size (0 = unused).
Access: Online.
AC INI-Param: ACCESSLIST_Packet_Size"
       ::= {acSysAccessListEntry 10}



     acSysAccessListByteRate OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Allowed traffic in bytes per second (0 = unused).
Access: Online.
AC INI-Param: ACCESSLIST_Byte_Rate"
       ::= {acSysAccessListEntry 11}



     acSysAccessListByteBurst OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Allowed traffic burst in bytes (0 = unused).
Access: Online.
AC INI-Param: ACCESSLIST_Byte_Burst"
       ::= {acSysAccessListEntry 12}



     acSysAccessListAllowType OBJECT-TYPE
       SYNTAX INTEGER {
                  notSet(0)
,
                  allow(1)
,
                  block(2)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Allow or block traffic matching this rule.
Access: Online.
AC INI-Param: ACCESSLIST_Allow_Type"
       ::= {acSysAccessListEntry 13}



     acSysAccessListMatchCount OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Statistics: number of matched packets.
AC INI-Param: ACCESSLIST_MatchCount"
       ::= {acSysAccessListEntry 14}



     acSysAccessListInterfaceName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..15))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Name of the specific interface the rule applies to. None - default
value when no interface was chosen.
Access: Online.
AC INI-Param: ACCESSLIST_Interface_ID"
       ::= {acSysAccessListEntry 15}



     acSysAccessListUseSpecificInterface OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Rule for specific interface or for the entire interfaces.
Access: Online.
AC INI-Param: ACCESSLIST_Use_Specific_Interface"
       ::= {acSysAccessListEntry 16}



     acSysAccessListSourcePort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Source Port.
Access: Online.
AC INI-Param: ACCESSLIST_Source_Port"
       ::= {acSysAccessListEntry 17}



     acSysAccessListPrefixLength OBJECT-TYPE
       SYNTAX Unsigned32 (0..128)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Prefix length of source IP address (defining a subnet).
Access: Online.
AC INI-Param: ACCESSLIST_PrefixLen"
       ::= {acSysAccessListEntry 18}



     acSysMediaEncription OBJECT IDENTIFIER ::= {acSysSecurity 24}


     acSysMediaEncriptionRTPAuthenticationDisableTx OBJECT-TYPE
       SYNTAX INTEGER {
                  inactive(0)
,
                  active(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "On a secured RTP session, determines whether to enable Authentication
on transmitted RTP packets. 

One of the following values: 

0 = Enable
1 = Disable.
Access: Online.
AC INI-Param: RTPAuthenticationDisableTx"
       ::= {acSysMediaEncription 1}



     acSysMediaEncriptionRTPAuthenticationDisableRx OBJECT-TYPE
       SYNTAX INTEGER {
                  inactive(0)
,
                  active(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "On a secured RTP session, determines whether to enable Authentication
on received RTP packets 
0 = Enable
1 = Disable.
Access: Online.
AC INI-Param: RTPAuthenticationDisableRx"
       ::= {acSysMediaEncription 2}



     acSysMediaEncriptionRTPEncryptionDisableTx OBJECT-TYPE
       SYNTAX INTEGER {
                  inactive(0)
,
                  active(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "On a secured RTP session, determines whether to enable Encryption
on transmitted RTP packets. One of the following values:

0 = Enable
1 = Disable.
Access: Online.
AC INI-Param: RTPEncryptionDisableTx"
       ::= {acSysMediaEncription 3}



     acSysMediaEncriptionRTPEncryptionDisableRx OBJECT-TYPE
       SYNTAX INTEGER {
                  inactive(0)
,
                  active(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "On a secured RTP session, determines whether to enable Encryption
on transmitted RTP packets. One of the following values:

0 = Enable
1 = Disable.
Access: Online.
AC INI-Param: RTPEncryptionDisableRx"
       ::= {acSysMediaEncription 4}



     acSysMediaEncriptionRTCPEncryptionDisableTx OBJECT-TYPE
       SYNTAX INTEGER {
                  inactive(0)
,
                  active(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "On a secured RTP session, determines whether to enable Encryption
on transmitted RTCP packets. One of the following values:
 
0 = Enable
1 = Disable.
Access: Online.
AC INI-Param: RTCPEncryptionDisableTx"
       ::= {acSysMediaEncription 5}



     acSysMediaEncriptionRTCPEncryptionDisableRx OBJECT-TYPE
       SYNTAX INTEGER {
                  inactive(0)
,
                  active(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "On a secured RTP session, determines whether to enable Encryption
on received RTCP packets. 

One of the following values:

0 = Enable
1 = Disable.
Access: Online.
AC INI-Param: RTCPEncryptionDisableRx"
       ::= {acSysMediaEncription 6}



     acSysSRTP OBJECT IDENTIFIER ::= {acSysMediaEncription 21}


     acSysSRTPPacketMKISize OBJECT-TYPE
       SYNTAX Unsigned32 (0..4)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the size of the parameter Master Key Identifier (MKI)
in SRTP Tx packets. 

One of the following values: 

0 = MKI Disabled
1 - 4 = size (bytes of MKI).
Access: Online.
AC INI-Param: SRTPTxPacketMKISize"
       ::= {acSysSRTP 1}



     acSys802dot1x OBJECT IDENTIFIER ::= {acSysSecurity 25}


     acSys802dot1xMode OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(0)
,
                  eapMd5(1)
,
                  protectedEap(2)
,
                  eapTls(3)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Enables support for IEEE 802.1x physical port security.
0 = Disabled
1 = EAP-MD5
2 = Protected EAP (PEAP)
3 = EAP-TLS
.
Access: Instant.
AC INI-Param: 802.1xMode"
       ::= {acSys802dot1x 1}



     acSys802dot1xUsername OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..31))
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Username for IEEE 802.1x support.
Access: Instant.
AC INI-Param: 802.1xUsername"
       ::= {acSys802dot1x 2}



     acSys802dot1xPassword OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..31))
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Password for IEEE 802.1x support.
Access: Instant.
AC INI-Param: 802.1xPassword"
       ::= {acSys802dot1x 3}



     acSys802dot1xVerifyPeerCertificate OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Verify Peer Certificate for IEEE 802.1x support.
Access: Instant.
AC INI-Param: 802.1xVerifyPeerCertificate"
       ::= {acSys802dot1x 4}



     acSysTLSContexts OBJECT IDENTIFIER ::= {acSysSecurity 26}


     -- ****************************************
     -- acSysTLSContexts table declaration
     -- ****************************************
     acSysTLSContextsTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysTLSContextsEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "TLS Contexts information"
       ::= {acSysTLSContexts 1}



     -- ****************************************
     -- acSysTLSContexts table entry
     -- ****************************************
     acSysTLSContextsEntry OBJECT-TYPE
       SYNTAX AcSysTLSContextsEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysTLSContextsIndex}
       ::= {acSysTLSContextsTable 1}



     -- ****************************************
     -- acSysTLSContexts TABLE
     -- ****************************************
     AcSysTLSContextsEntry ::= SEQUENCE {
       acSysTLSContextsIndex                           Unsigned32,
       acSysTLSContextsRowStatus                       RowStatus,
       acSysTLSContextsAction                          Unsigned32,
       acSysTLSContextsActionResult                    Unsigned32,
       acSysTLSContextsName                            SnmpAdminString,
       acSysTLSContextsTlsVersion                      INTEGER,
       acSysTLSContextsDTLSVersion                     INTEGER,
       acSysTLSContextsCipherServer                    SnmpAdminString,
       acSysTLSContextsCipherClient                    SnmpAdminString,
       acSysTLSContextsCipherServer13                  SnmpAdminString,
       acSysTLSContextsCipherClient13                  SnmpAdminString,
       acSysTLSContextsExchangeGroups                  SnmpAdminString,
       acSysTLSContextsStrictValidation                INTEGER,
       acSysTLSContextsDHKeySize                       INTEGER,
       acSysTLSContextsTlsRenegotiation                INTEGER
     }



     acSysTLSContextsIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..100)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line.
AC INI-Param: Index"
       ::= {acSysTLSContextsEntry 1}



     acSysTLSContextsRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "ROWSTATUS Field for line.
AC INI-Param: N/A"
       ::= {acSysTLSContextsEntry 2}



     acSysTLSContextsAction OBJECT-TYPE
       SYNTAX Unsigned32 (0..0)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS.
AC INI-Param: N/A"
       ::= {acSysTLSContextsEntry 3}



     acSysTLSContextsActionResult OBJECT-TYPE
       SYNTAX Unsigned32 (0..0)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT.
AC INI-Param: N/A"
       ::= {acSysTLSContextsEntry 4}



     acSysTLSContextsName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..32))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts Name.
AC INI-Param: Name"
       ::= {acSysTLSContextsEntry 5}



     acSysTLSContextsTlsVersion OBJECT-TYPE
       SYNTAX INTEGER {
                  anyTLS1dotx(0)
,
                  tLSv1dot0(1)
,
                  tLSv1dot1(2)
,
                  tLSv1dot0AndTLSv1dot1(3)
,
                  tLSv1dot2(4)
,
                  tLSv1dot1AndTLSv1dot2(6)
,
                  tLSv1dot0TLSv1dot1AndTLSv1dot2(7)
,
                  tLSv1dot3(8)
,
                  tLSv1dot2AndTLSv1dot3(12)
,
                  tLSv1dot1TLSv1dot2AndTLSv1dot3(14)
,
                  tLSv1dot0TLSv1dot1TLSv1dot2AndTLSv1dot3(15)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts Version.
AC INI-Param: TLSVersion"
       ::= {acSysTLSContextsEntry 6}



     acSysTLSContextsDTLSVersion OBJECT-TYPE
       SYNTAX INTEGER {
                  dTLSv1dot0AndDTLSv1dot2(0)
,
                  dTLSv1dot0(1)
,
                  dTLSv1dot2(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts DTLS Version.
AC INI-Param: DTLSVersion"
       ::= {acSysTLSContextsEntry 7}



     acSysTLSContextsCipherServer OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..256))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts Cipher Server.
AC INI-Param: ServerCipherString"
       ::= {acSysTLSContextsEntry 8}



     acSysTLSContextsCipherClient OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..256))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts Cipher Client.
AC INI-Param: ClientCipherString"
       ::= {acSysTLSContextsEntry 9}



     acSysTLSContextsCipherServer13 OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..256))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts Cipher Server 13.
AC INI-Param: ServerCipherTLS13String"
       ::= {acSysTLSContextsEntry 10}



     acSysTLSContextsCipherClient13 OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..256))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts Cipher Client 13.
AC INI-Param: ClientCipherTLS13String"
       ::= {acSysTLSContextsEntry 11}



     acSysTLSContextsExchangeGroups OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..256))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts Exchange Groups.
AC INI-Param: KeyExchangeGroups"
       ::= {acSysTLSContextsEntry 12}



     acSysTLSContextsStrictValidation OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts Strict Validation.
AC INI-Param: RequireStrictCert"
       ::= {acSysTLSContextsEntry 13}



     acSysTLSContextsDHKeySize OBJECT-TYPE
       SYNTAX INTEGER {
                  dHKeySize1024(1024)
,
                  dHKeySize2048(2048)
,
                  dHKeySize3072(3072)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts DH KeySize.
AC INI-Param: DHKeySize"
       ::= {acSysTLSContextsEntry 14}



     acSysTLSContextsTlsRenegotiation OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TLS Contexts Tls Renegotiation.
AC INI-Param: TlsRenegotiation"
       ::= {acSysTLSContextsEntry 15}



     acSysSerialIF OBJECT IDENTIFIER ::= {acSystemConfiguration 8}


     acSysSerialIFBaudRate OBJECT-TYPE
       SYNTAX INTEGER {
                  r1200(1200)
,
                  r2400(2400)
,
                  r4800(4800)
,
                  r9600(9600)
,
                  r14400(14400)
,
                  r19200(19200)
,
                  r38400(38400)
,
                  r57600(57600)
,
                  r115200(115200)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables changes to the Serial Baud Rate for Simplified Message
Desk Interface (SMDI).

Standard values: 1200, 2400, 9600, 14400, 19200, 38400, 57600,
115200.
Access: Offline.
AC INI-Param: SerialBaudRate"
       ::= {acSysSerialIF 1}



     acSysSerialIFData OBJECT-TYPE
       SYNTAX Unsigned32 (7..8)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Changes the serial data bit for the Simplified Message Desk
Interface (SMDI). 

7 = 7 Bit
8 = 8 Bit.
Access: Offline.
AC INI-Param: SerialData"
       ::= {acSysSerialIF 2}



     acSysSerialIFParity OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  odd(1)
,
                  even(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Changes the serial parity for the Simplified Message Desk Interface
(SMDI). 

0 = None 
1 = Odd 
2 = Even.
Access: Offline.
AC INI-Param: SerialParity"
       ::= {acSysSerialIF 3}



     acSysSerialIFStop OBJECT-TYPE
       SYNTAX Unsigned32 (1..2)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Changes the serial stop for the Simplified Message Desk Interface
(SMDI).

1 = 1 Bit 
2 = 2 Bit.
Access: Offline.
AC INI-Param: SerialStop"
       ::= {acSysSerialIF 4}



     acSysSerialIFFlowControl OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  hardware(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Changes the serial flow control for the Simplified Message Desk
Interface (SMDI). 

0 = None
1 = Hardware.
Access: Offline.
AC INI-Param: SerialFlowControl"
       ::= {acSysSerialIF 5}



     acVoiceStream OBJECT IDENTIFIER ::= {acSystemConfiguration 9}


     acVoiceStreamStatus OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(0)
,
                  enabled(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables/disables the voice streaming for all voice source types
(HTTP, NFS, Local Storage). When enabled, the module requires
some system resources, such as tasks and memory allocation.

0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: N/A"
       ::= {acVoiceStream 1}



     acVoiceStreamUploadMethod OBJECT-TYPE
       SYNTAX INTEGER {
                  httpPostMethod(0)
,
                  httpPutMethod(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the HTTP request type for uploading the voice stream
to the file server.

0 = POST
1 = PUT.
Access: Offline.
AC INI-Param: N/A"
       ::= {acVoiceStream 2}



     acVoiceStreamUploadPostUri OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..59))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the URI used on the POST request, to upload voice data
from the media server to a web server.
This parameter is used only when using the HTTP POST for recording
and the command is not issued by the Lib (tpncp protocol).
The path needs to be set to the upload script on the web server.

.
Access: Offline.
AC INI-Param: N/A"
       ::= {acVoiceStream 3}



     acSysAMS OBJECT IDENTIFIER ::= {acSystemConfiguration 10}


     acSysAMSProfile OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Enable/Disable AMS Advanced IVR play functionality.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: AMSProfile"
       ::= {acSysAMS 1}



     acSysAMSApsIpAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Sets the destination UDP port to which the Heartbeat Packets
are sent.
Range =  IP address in dotted notation 
xxx.xxx.xxx.xxx
Default = 0.0.0.0.
Access: Offline.
AC INI-Param: HeartbeatDestIP"
       ::= {acSysAMS 2}



     acSysAMSApsPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..64000)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Sets the destination UDP port to which the heartbeat packets
are sent.
Access: Offline.
AC INI-Param: HeartbeatDestPort"
       ::= {acSysAMS 3}



     acSysAMSPrimaryLanguage OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..3))
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Defines the Primary Language for the AMS. 
Range = String[3] - language ISO string.
Access: Instant.
AC INI-Param: AMSPrimaryLanguage"
       ::= {acSysAMS 4}



     acSysAMSSecondaryLanguage OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..3))
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Defines the Secondary Language for the AMS. 
Range = String[3] - language ISO string.
Access: Instant.
AC INI-Param: AMSSecondaryLanguage"
       ::= {acSysAMS 5}



     acSysAMSAPSProfile OBJECT-TYPE
       SYNTAX INTEGER {
                  vpDatProvidedAudio(0)
,
                  apsProvidedAudio(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Indicates if the system should expect to use APS bundle (vp.dat
and segments.xml files), or if the system should expect
the vp.dat file only. A 1 means that an APS bundle should be
used. A 0 means that the system should use vp.dat only. The
default setting is 1, meaning expect APS bundle.
Access: Offline.
AC INI-Param: APSEnabled"
       ::= {acSysAMS 6}



     acSysAMSForceRepositoryEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Indicates that a new audio repository (consisting of VP and
XML files) should always be uploaded to the board regardless
of whether signals are still being played on the old repository.
Access: Instant.
AC INI-Param: AMSForceRepositoryUpdateEnabled"
       ::= {acSysAMS 7}



     acSysNetworkFileSystem OBJECT IDENTIFIER ::= {acSystemConfiguration 11}


     -- ****************************************
     -- acSysNFS table declaration
     -- ****************************************
     acSysNFSTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysNFSEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysNetworkFileSystem 21}



     -- ****************************************
     -- acSysNFS table entry
     -- ****************************************
     acSysNFSEntry OBJECT-TYPE
       SYNTAX AcSysNFSEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysNFSIndex}
       ::= {acSysNFSTable 1}



     -- ****************************************
     -- acSysNFS TABLE
     -- ****************************************
     AcSysNFSEntry ::= SEQUENCE {
       acSysNFSIndex                                   Unsigned32,
       acSysNFSRowStatus                               RowStatus,
       acSysNFSAction                                  INTEGER,
       acSysNFSActionRes                               INTEGER,
       acSysNFSHostOrIP                                SnmpAdminString,
       acSysNFSRootPath                                SnmpAdminString,
       acSysNFSNfsVersion                              INTEGER,
       acSysNFSAuthType                                INTEGER,
       acSysNFSUID                                     Unsigned32,
       acSysNFSGID                                     Unsigned32,
       acSysNFSVlanType                                INTEGER
     }



     acSysNFSIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..15)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line. Internal parameter. Index can be up to
15 in dependency of board type.
AC INI-Param: NFSServers_Index"
       ::= {acSysNFSEntry 1}



     acSysNFSRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysNFSEntry 2}



     acSysNFSAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysNFSEntry 3}



     acSysNFSActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysNFSEntry 4}



     acSysNFSHostOrIP OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..39))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "The domain name or IP address of the NFS server. If a domain
name is provided, then a DNS server must be configured.
Access: Online.
AC INI-Param: NFSServers_HostOrIP"
       ::= {acSysNFSEntry 5}



     acSysNFSRootPath OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..99))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Path to the root of the exported file system.
Access: Online.
AC INI-Param: NFSServers_RootPath"
       ::= {acSysNFSEntry 6}



     acSysNFSNfsVersion OBJECT-TYPE
       SYNTAX INTEGER {
                  v2(2)
,
                  v3(3)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "NFS version to use with this remote file system, 2 or 3 (default).
Access: Online.
AC INI-Param: NFSServers_NfsVersion"
       ::= {acSysNFSEntry 7}



     acSysNFSAuthType OBJECT-TYPE
       SYNTAX INTEGER {
                  null(0)
,
                  unix(1)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Identifies the authentication method used with this remote file
system, 0 for AUTH_NULL, 1 for AUTH_UNIX (default).
Access: Online.
AC INI-Param: NFSServers_AuthType"
       ::= {acSysNFSEntry 8}



     acSysNFSUID OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "User ID used in authentication if using AUTH_UNIX. The default
is 0.
Access: Online.
AC INI-Param: NFSServers_UID"
       ::= {acSysNFSEntry 9}



     acSysNFSGID OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Group ID used in authentication if using AUTH_UNIX. The default
is 1.
Access: Online.
AC INI-Param: NFSServers_GID"
       ::= {acSysNFSEntry 10}



     acSysNFSVlanType OBJECT-TYPE
       SYNTAX INTEGER {
                  oam(0)
,
                  media(1)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "The VLAN, OAM(0) or Media(1), to use when accessing this remote
file system. The default is to use
the media VLAN. This parameters applies only if multiple IP
addresses are configured on this board.
Access: Online.
AC INI-Param: NFSServers_VlanType"
       ::= {acSysNFSEntry 11}



     acSysHA OBJECT IDENTIFIER ::= {acSystemConfiguration 12}


     acSysHAGlobalIPAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Defines the M3K global IP address to be used by the active module
in HA system. (Dotted format notation. e.g., 192.10.1.255).
Range = Legal IP address.
Access: Offline.
AC INI-Param: M3KGlobalIpAddr"
       ::= {acSysHA 1}



     acSysHARemoteAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Defines the Maintenance IF IP address of the remote HA unit.
Relevant to M4K and SW-SBC.
Access: Offline.
AC INI-Param: HARemoteAddress"
       ::= {acSysHA 2}



     acSysHARevertive OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "When enabled, unit with higher HA priority will take the active
state in HA system.
Relevant to M4K and SW-SBC.
Access: Offline.
AC INI-Param: HARevertiveEnabled"
       ::= {acSysHA 3}



     acSysHAPriority OBJECT-TYPE
       SYNTAX Unsigned32 (1..10)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables the user to define the HA priority to decide if unit
should be in Active or Redundant state (Valid only when acSysHARevertive
is set)
Relevant to M4K and SW-SBC.
Access: Offline.
AC INI-Param: HAPriority"
       ::= {acSysHA 4}



     acSysHARedundantPriority OBJECT-TYPE
       SYNTAX Unsigned32 (0..10)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables the user to define the Redundant HA priority to decide
if unit should be in Active or Redundant state. Valid range
is 1-10.
Relevant to M4K and SW-SBC.
If board doesnt support HA or is not configured properly returns
0.
Access: Offline.
AC INI-Param: N/A"
       ::= {acSysHA 5}



     acSysHAPingEnabled OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enabling network monitor using ping to test reachability from
defined source interface, a drop in reachability will trigger
switch over to redundant unit.
Access: Online.
AC INI-Param: HAPingEnabled"
       ::= {acSysHA 6}



     acSysHAPingDestination OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Defines the ping destination IP address of HA network monitor
reachability module.
Access: Online.
AC INI-Param: HAPingDestination"
       ::= {acSysHA 7}



     acSysHAPingSourceIfName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..16))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the ping source inteface to test for HA network monitor
reachability module.
Access: Online.
AC INI-Param: HAPingSourceIfName"
       ::= {acSysHA 8}



     acSysHAPingTimeout OBJECT-TYPE
       SYNTAX Unsigned32 (1..60)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the ping time out value in seconds for HA network monitor
reachability module.
Access: Online.
AC INI-Param: HAPingTimeout"
       ::= {acSysHA 9}



     acSysHAPingRetries OBJECT-TYPE
       SYNTAX Unsigned32 (0..100)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the ping retries value for HA network monitor reachability
module.
Access: Online.
AC INI-Param: HAPingRetries"
       ::= {acSysHA 10}



     acSysTransmission OBJECT IDENTIFIER ::= {acSystemConfiguration 13}


     acSysTransmissionType OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                   opticalSonetSdh(1)
,
                  copperDs3(2)
,
                  copperE1Ds1(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the PSTN Transmission type for the board: optical SONET
/ SDH or copper DS3.
Access: Offline.
AC INI-Param: PSTNTransmissionType"
       ::= {acSysTransmission 1}



     acSysTiming OBJECT IDENTIFIER ::= {acSystemConfiguration 14}


     acSysTimingMode OBJECT-TYPE
       SYNTAX INTEGER {
                  standAlone(0)
,
                  external(1)
,
                  lineSync(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the PSTN Timing synchonization mode of the Gateway.
One of the following values: TM_External_MODE(1)
-External Timing mode - use the SAT trunks Centralized Line
Timing to synchronize the Gateway with one of the PSTN interfaces.
TM_LineSync_MODE(2)
-Distributed Line Timing mode (for the 1610 boards)- without
using the SAT timing module. TM_Standalone_MODE(0)
-Non-synchronized mode - each board or TPM is synchronized
internally from one of the PSTN interfaces without using the
SAT timing module.
Access: Online.
AC INI-Param: TMMode"
       ::= {acSysTiming 1}



     acSysTimingValidationTime OBJECT-TYPE
       SYNTAX Unsigned32 (0..15)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Reference validation time. Applicable for External timing and
Line timing timing references. Range: 0 - 15 minutes. Resolution:
1 minute.
Access: Online.
AC INI-Param: TMReferenceValidationTime"
       ::= {acSysTiming 2}



     acSysTimingClockToDeriveA OBJECT-TYPE
       SYNTAX INTEGER {
                  deriveREFFromLineClock1(0)
,
                  deriveInternalClock(4)
,
                  clockFromReceiveSide(7)


                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Which Clock to use in sync mode.
Access: Online.
AC INI-Param: TMClockToDerive_A"
       ::= {acSysTiming 3}



     acSysTimingClockToDeriveB OBJECT-TYPE
       SYNTAX INTEGER {
                  deriveREFFromLineClock1(0)
,
                  deriveInternalClock(4)
,
                  clockFromReceiveSide(7)


                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Which Clock to use in sync mode.
Access: Online.
AC INI-Param: TMClockToDerive_B"
       ::= {acSysTiming 4}



     acSysTimingExternalIFType OBJECT-TYPE
       SYNTAX INTEGER {
                  e1CRC4(0)
,
                  e1CAS(1)
,
                  e1FAS(2)
,
                  t1D4(3)
,
                  t1ESF(4)
,
                  t12(5)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the external line reference (BITS) transmission format.
Access: Online.
AC INI-Param: TMExternalIFType"
       ::= {acSysTiming 5}



     acSysTimingLoopBackRef1 OBJECT-TYPE
       SYNTAX INTEGER {
                  loopDisable(0)
,
                  loopEnable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables loopback state, by connecting Rx path towards Tx path.
Access: Online.
AC INI-Param: TMLoopBackExternalRef1"
       ::= {acSysTiming 6}



     acSysTimingLoopBackRef2 OBJECT-TYPE
       SYNTAX INTEGER {
                  loopDisable(0)
,
                  loopEnable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables loopback state, by connecting Rx path towards Tx path.
Access: Online.
AC INI-Param: TMLoopBackExternalRef2"
       ::= {acSysTiming 7}



     acSysTimingTransmitControl OBJECT-TYPE
       SYNTAX INTEGER {
                  systemClock(0)
,
                  aIS(1)
,
                  disableTransmit(2)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Enables loopback state, by connecting Rx path towards Tx path.
Access: Online.
AC INI-Param: TMTransmitControl"
       ::= {acSysTiming 8}



     acSysTimingE1LineBuildOut OBJECT-TYPE
       SYNTAX INTEGER {
                  tm75OhmNormal(0)
,
                  tm120OhmNormal(1)
,
                  tm75OhmHighReturnLoss(4)
,
                  tm120OhmHighReturnLoss(5)
,
                  tm75OhmNormalGappedClock(6)
,
                  tm120OhmNormalGappedClock(7)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Sets the transmission power between the timing module on the
SAT and the E1 external reference clock (ohms). This parameter
is only relevant for the Mediant 3000.This parameter is
enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1).

One of the following values: E_75_OHM_with_high_return_loss(4),E_120_OHM_with_high_return_loss(5),E_75_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(6),E_120_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(7),E_75_OHM_normal(0),E_120_OHM_normal(1).
Access: Online.
AC INI-Param: TME1LineBuildOut "
       ::= {acSysTiming 9}



     acSysTimingT1LineBuildOut OBJECT-TYPE
       SYNTAX INTEGER {
                  dSX10to133feet0dBCSU(0)
,
                  dSX1133to266feet(1)
,
                  dSX1266to399feet(2)
,
                  dSX1399to533feet(3)
,
                  dSX1533to655feet(4)
,
                  dSX10to133ft0dBgappedclock(7)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "External Reference Transmit Line Build Out.
Access: Online.
AC INI-Param: TMT1LineBuildOut"
       ::= {acSysTiming 10}



     acSysLDAP OBJECT IDENTIFIER ::= {acSystemConfiguration 15}


     acSysLDAPServerIp OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter defines the IP address in dotted format notation.
e.g., 192.10.1.255
Range = Legal IP address.
Access: Online.
AC INI-Param: LDAPSERVERIP"
       ::= {acSysLDAP 1}



     acSysLDAPServerPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Defines the port number for the LDAP server.
Range = Valid port number.
Access: Online.
AC INI-Param: LDAPSERVERPORT"
       ::= {acSysLDAP 2}



     acSysLDAPServerMaxRespondTime OBJECT-TYPE
       SYNTAX Unsigned32 (0..86400)
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Defines the period of time the module  will wait for LDAP server
response (seconds).
Access: Instant.
AC INI-Param: LDAPSERVERMAXRESPONDTIME"
       ::= {acSysLDAP 3}



     acSysLDAPServerDomainName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter is used to indicate the name of LDAP server.
Access: Online.
AC INI-Param: LDAPSERVERDOMAINNAME"
       ::= {acSysLDAP 4}



     acSysLDAPSearchDN OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter is used to indicate the search DN for LDAP search
request.
Access: Online.
AC INI-Param: LDAPSEARCHDN"
       ::= {acSysLDAP 5}



     acSysLDAPPassword OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter is used to indicate the user password of LDAP
server.
Access: Online.
AC INI-Param: LDAPPASSWORD"
       ::= {acSysLDAP 6}



     acSysLDAPBindDN OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "This parameter is used to indicate the of LDAP server bind DN.
Access: Online.
AC INI-Param: LDAPBINDDN"
       ::= {acSysLDAP 7}



     acSysLDAPServiceEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to either enable or disable LDAP service.

0- disable (default)
1 - enable.
Access: Offline.
AC INI-Param: LDAPSERVICEENABLE"
       ::= {acSysLDAP 8}



     acSysLDAPCacheEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables/Disable using the cashe in LDAP.

0- disable (default)
1 - enable.
Access: Offline.
AC INI-Param: LDAPCACHEENABLE"
       ::= {acSysLDAP 9}



     acSysLDAPCacheEntryTimeout OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "The time (in seconds) that an entry in the LDAP cache is valid.
Access: Online.
AC INI-Param: LDAPCACHEENTRYTIMEOUT"
       ::= {acSysLDAP 10}



     acSysLDAPCacheEntryRemovalTimeout OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "The time (in seconds) that an entry in the LDAP cache is removed
from cache.
Access: Online.
AC INI-Param: LDAPCACHEENTRYREMOVALTIMEOUT"
       ::= {acSysLDAP 11}



     -- ****************************************
     -- acSysLdapConfiguration table declaration
     -- ****************************************
     acSysLdapConfigurationTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysLdapConfigurationEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysLDAP 21}



     -- ****************************************
     -- acSysLdapConfiguration table entry
     -- ****************************************
     acSysLdapConfigurationEntry OBJECT-TYPE
       SYNTAX AcSysLdapConfigurationEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysLdapConfigurationIndex}
       ::= {acSysLdapConfigurationTable 1}



     -- ****************************************
     -- acSysLdapConfiguration TABLE
     -- ****************************************
     AcSysLdapConfigurationEntry ::= SEQUENCE {
       acSysLdapConfigurationIndex                     Unsigned32,
       acSysLdapConfigurationRowStatus                 RowStatus,
       acSysLdapConfigurationAction                    INTEGER,
       acSysLdapConfigurationActionRes                 INTEGER,
       acSysLdapConfigurationServerIp                  IpAddress,
       acSysLdapConfigurationServerPort                Unsigned32,
       acSysLdapConfigurationMaxRespondTime            Unsigned32,
       acSysLdapConfigurationServerDomainName          SnmpAdminString,
       acSysLdapConfigurationPassword                  SnmpAdminString,
       acSysLdapConfigurationBindDn                    SnmpAdminString,
       acSysLdapConfigurationInterfaceType             Unsigned32,
       acSysLdapConfigurationConnectionStatus          INTEGER
     }



     acSysLdapConfigurationIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line.
AC INI-Param: LdapConfiguration_Index"
       ::= {acSysLdapConfigurationEntry 1}



     acSysLdapConfigurationRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysLdapConfigurationEntry 2}



     acSysLdapConfigurationAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysLdapConfigurationEntry 3}



     acSysLdapConfigurationActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysLdapConfigurationEntry 4}



     acSysLdapConfigurationServerIp OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-create
       STATUS deprecated
       DESCRIPTION
           "Defines the LDAP server IP address in dotted format notation.
e.g., 192.10.1.255.
Access: Online.
AC INI-Param: LdapConfiguration_LdapConfServerIp"
       ::= {acSysLdapConfigurationEntry 5}



     acSysLdapConfigurationServerPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Defines the port number for LDAP server.
Access: Online.
AC INI-Param: LdapConfiguration_LdapConfServerPort"
       ::= {acSysLdapConfigurationEntry 6}



     acSysLdapConfigurationMaxRespondTime OBJECT-TYPE
       SYNTAX Unsigned32 (0..86400)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Defines the period of time the module  will wait for LDAP server
response (seconds).
Access: Online.
AC INI-Param: LdapConfiguration_LdapConfServerMaxRespondTime"
       ::= {acSysLdapConfigurationEntry 7}



     acSysLdapConfigurationServerDomainName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "This parameter is used to indicate the name of LDAP server.
Access: Online.
AC INI-Param: LdapConfiguration_LdapConfServerDomainName"
       ::= {acSysLdapConfigurationEntry 8}



     acSysLdapConfigurationPassword OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "This parameter is used to indicate the user password of LDAP
server.
Access: Online.
AC INI-Param: LdapConfiguration_LdapConfPassword"
       ::= {acSysLdapConfigurationEntry 9}



     acSysLdapConfigurationBindDn OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "This parameter is used to indicate the of LDAP server bind DN.
Access: Online.
AC INI-Param: LdapConfiguration_LdapConfBindDn"
       ::= {acSysLdapConfigurationEntry 10}



     acSysLdapConfigurationInterfaceType OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Determines what VLAN interface should be used.
Access: Online.
AC INI-Param: LdapConfiguration_LdapConfInterfaceType"
       ::= {acSysLdapConfigurationEntry 11}



     acSysLdapConfigurationConnectionStatus OBJECT-TYPE
       SYNTAX INTEGER {
                  ldapNotApplicable(0)
,
                  ldapConnectionBroken(1)
,
                  ldapConnecting(2)
,
                  ldapConnected(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "shows the ldap server Connection Status (LDAP_NOT_APPLICABLE
= 0, LDAP_CONNECTION_BROKEN = 1, LDAP_CONNECTING = 2, LDAP_CONNECTED
= 3).
AC INI-Param: LdapConfiguration_ConnectionStatus"
       ::= {acSysLdapConfigurationEntry 12}



     -- ****************************************
     -- acSysLdapServersSearchDNs table declaration
     -- ****************************************
     acSysLdapServersSearchDNsTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysLdapServersSearchDNsEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysLDAP 22}



     -- ****************************************
     -- acSysLdapServersSearchDNs table entry
     -- ****************************************
     acSysLdapServersSearchDNsEntry OBJECT-TYPE
       SYNTAX AcSysLdapServersSearchDNsEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysLdapServersSearchDNsLdapConfigurationIndex,acSysLdapServersSearchDNsInternalIndex}
       ::= {acSysLdapServersSearchDNsTable 1}



     -- ****************************************
     -- acSysLdapServersSearchDNs TABLE
     -- ****************************************
     AcSysLdapServersSearchDNsEntry ::= SEQUENCE {
       acSysLdapServersSearchDNsLdapConfigurationIndex Unsigned32,
       acSysLdapServersSearchDNsInternalIndex          Unsigned32,
       acSysLdapServersSearchDNsRowStatus              RowStatus,
       acSysLdapServersSearchDNsAction                 INTEGER,
       acSysLdapServersSearchDNsActionRes              INTEGER,
       acSysLdapServersSearchDNsBasePath               SnmpAdminString
     }



     acSysLdapServersSearchDNsLdapConfigurationIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "The Ldap Configuration Index at LdapConfiguration table.
AC INI-Param: LdapServersSearchDNs_LdapConfigurationIndex"
       ::= {acSysLdapServersSearchDNsEntry 1}



     acSysLdapServersSearchDNsInternalIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..5)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Search Dn Index.
AC INI-Param: LdapServersSearchDNs_SearchDnInternalIndex"
       ::= {acSysLdapServersSearchDNsEntry 2}



     acSysLdapServersSearchDNsRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysLdapServersSearchDNsEntry 3}



     acSysLdapServersSearchDNsAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysLdapServersSearchDNsEntry 4}



     acSysLdapServersSearchDNsActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A"
       ::= {acSysLdapServersSearchDNsEntry 5}



     acSysLdapServersSearchDNsBasePath OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "base path (DN).
Access: Online.
AC INI-Param: LdapServersSearchDNs_Base_Path"
       ::= {acSysLdapServersSearchDNsEntry 6}



     asSysNqm OBJECT IDENTIFIER ::= {acSystemConfiguration 16}


     -- ****************************************
     -- acSysNqmSender table declaration
     -- ****************************************
     acSysNqmSenderTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysNqmSenderEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {asSysNqm 21}



     -- ****************************************
     -- acSysNqmSender table entry
     -- ****************************************
     acSysNqmSenderEntry OBJECT-TYPE
       SYNTAX AcSysNqmSenderEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysNqmSenderIndex}
       ::= {acSysNqmSenderTable 1}



     -- ****************************************
     -- acSysNqmSender TABLE
     -- ****************************************
     AcSysNqmSenderEntry ::= SEQUENCE {
       acSysNqmSenderIndex                             Unsigned32,
       acSysNqmSenderRowStatus                         RowStatus,
       acSysNqmSenderAction                            INTEGER,
       acSysNqmSenderActionRes                         INTEGER,
       acSysNqmSenderSenderName                        SnmpAdminString,
       acSysNqmSenderActive                            INTEGER,
       acSysNqmSenderTargetIpAddress                   SnmpAdminString,
       acSysNqmSenderTargetPort                        Unsigned32,
       acSysNqmSenderPacketInterval                    Unsigned32,
       acSysNqmSenderPayloadSize                       Unsigned32,
       acSysNqmSenderIpTos                             Unsigned32,
       acSysNqmSenderTimeout                           Unsigned32,
       acSysNqmSenderRttThreshold                      Unsigned32,
       acSysNqmSenderJitterThreshold                   Unsigned32,
       acSysNqmSenderPacketLossThershold               Unsigned32,
       acSysNqmSenderProbingConfigName                 RowPointer,
       acSysNqmSenderSourceInterfaceName               RowPointer
     }



     acSysNqmSenderIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..9)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line. Internal parameter.
AC INI-Param: NqmSenderTable_Index"
       ::= {acSysNqmSenderEntry 1}



     acSysNqmSenderRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS field for line. Internal parameter.
AC INI-Param: NqmSenderTable_RowStatus"
       ::= {acSysNqmSenderEntry 2}



     acSysNqmSenderAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: NqmSenderTable_Action"
       ::= {acSysNqmSenderEntry 3}



     acSysNqmSenderActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: NqmSenderTable_ActionRes"
       ::= {acSysNqmSenderEntry 4}



     acSysNqmSenderSenderName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..64))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Sender descriptive name.
Access: Online.
AC INI-Param: NqmSenderTable_SenderName"
       ::= {acSysNqmSenderEntry 5}



     acSysNqmSenderActive OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Sender enable.
Access: Online.
AC INI-Param: NqmSenderTable_Active"
       ::= {acSysNqmSenderEntry 6}



     acSysNqmSenderTargetIpAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Target IP address.
Access: Online.
AC INI-Param: NqmSenderTable_TargetIpAddress"
       ::= {acSysNqmSenderEntry 7}



     acSysNqmSenderTargetPort OBJECT-TYPE
       SYNTAX Unsigned32 (3900..3990)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Target transport layer port number.
Ports are: 3900, 3910, 3920, 3930, 3940, 3950, 3960, 3970,
3980, 3990.
Access: Online.
AC INI-Param: NqmSenderTable_TargetPort"
       ::= {acSysNqmSenderEntry 8}



     acSysNqmSenderPacketInterval OBJECT-TYPE
       SYNTAX Unsigned32 (5..1000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Interval between each packet transmitting [msec].
Access: Online.
AC INI-Param: NqmSenderTable_PacketInterval"
       ::= {acSysNqmSenderEntry 9}



     acSysNqmSenderPayloadSize OBJECT-TYPE
       SYNTAX Unsigned32 (28..1420)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Size of IP payload [bytes].
Access: Online.
AC INI-Param: NqmSenderTable_PayloadSize"
       ::= {acSysNqmSenderEntry 10}



     acSysNqmSenderIpTos OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "TOS value in the IP header.
Access: Online.
AC INI-Param: NqmSenderTable_IpTos"
       ::= {acSysNqmSenderEntry 11}



     acSysNqmSenderTimeout OBJECT-TYPE
       SYNTAX Unsigned32 (0..32000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Receive timeout on expected packet.
Access: Online.
AC INI-Param: NqmSenderTable_Timeout"
       ::= {acSysNqmSenderEntry 12}



     acSysNqmSenderRttThreshold OBJECT-TYPE
       SYNTAX Unsigned32 (0..32000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Maximum allowable Round Trip Time [msec], if exceeded some action
is needed.
Access: Online.
AC INI-Param: NqmSenderTable_RttThreshold"
       ::= {acSysNqmSenderEntry 13}



     acSysNqmSenderJitterThreshold OBJECT-TYPE
       SYNTAX Unsigned32 (0..32000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Maximum allowable Jitter [msec], if exceeded some action is
needed.
Access: Online.
AC INI-Param: NqmSenderTable_JitterThreshold"
       ::= {acSysNqmSenderEntry 14}



     acSysNqmSenderPacketLossThershold OBJECT-TYPE
       SYNTAX Unsigned32 (0..32000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Maximum allowable Packet Loss, if exceeded some action is needed.
Access: Online.
AC INI-Param: NqmSenderTable_PacketLossThershold"
       ::= {acSysNqmSenderEntry 15}



     acSysNqmSenderProbingConfigName OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Name of corresponding probe in probing table.
Access: Online.
AC INI-Param: NqmSenderTable_ProbingConfigName"
       ::= {acSysNqmSenderEntry 16}



     acSysNqmSenderSourceInterfaceName OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Name of source interface.
Access: Online.
AC INI-Param: NqmSenderTable_SourceInterfaceName"
       ::= {acSysNqmSenderEntry 17}



     -- ****************************************
     -- acSysNqmProbing table declaration
     -- ****************************************
     acSysNqmProbingTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysNqmProbingEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {asSysNqm 22}



     -- ****************************************
     -- acSysNqmProbing table entry
     -- ****************************************
     acSysNqmProbingEntry OBJECT-TYPE
       SYNTAX AcSysNqmProbingEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysNqmProbingIndex}
       ::= {acSysNqmProbingTable 1}



     -- ****************************************
     -- acSysNqmProbing TABLE
     -- ****************************************
     AcSysNqmProbingEntry ::= SEQUENCE {
       acSysNqmProbingIndex                            Unsigned32,
       acSysNqmProbingRowStatus                        RowStatus,
       acSysNqmProbingAction                           INTEGER,
       acSysNqmProbingActionRes                        INTEGER,
       acSysNqmProbingProbeName                        SnmpAdminString,
       acSysNqmProbingDuration                         Unsigned32,
       acSysNqmProbingFrequency                        Unsigned32,
       acSysNqmProbingLifeSpan                         Unsigned32,
       acSysNqmProbingStartTime                        SnmpAdminString,
       acSysNqmProbingHistoryEntriesToKeep             Unsigned32
     }



     acSysNqmProbingIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..9)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line. Internal parameter.
AC INI-Param: NqmProbingTable_Index"
       ::= {acSysNqmProbingEntry 1}



     acSysNqmProbingRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS field for line. Internal parameter.
AC INI-Param: NqmProbingTable_RowStatus"
       ::= {acSysNqmProbingEntry 2}



     acSysNqmProbingAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: NqmProbingTable_Action"
       ::= {acSysNqmProbingEntry 3}



     acSysNqmProbingActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: NqmProbingTable_ActionRes"
       ::= {acSysNqmProbingEntry 4}



     acSysNqmProbingProbeName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..64))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Probe descriptive name.
Access: Online.
AC INI-Param: NqmProbingTable_ProbeName"
       ::= {acSysNqmProbingEntry 5}



     acSysNqmProbingDuration OBJECT-TYPE
       SYNTAX Unsigned32 (20..32000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Duration of probing session [sec].
Access: Online.
AC INI-Param: NqmProbingTable_Duration"
       ::= {acSysNqmProbingEntry 6}



     acSysNqmProbingFrequency OBJECT-TYPE
       SYNTAX Unsigned32 (0..32000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Time interval between the start of two consecutive probing sessions
 [sec].
Access: Online.
AC INI-Param: NqmProbingTable_Frequency"
       ::= {acSysNqmProbingEntry 7}



     acSysNqmProbingLifeSpan OBJECT-TYPE
       SYNTAX Unsigned32 (0..2000000000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Life span of this probe [sec].
Access: Online.
AC INI-Param: NqmProbingTable_LifeSpan"
       ::= {acSysNqmProbingEntry 8}



     acSysNqmProbingStartTime OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..64))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "start time of this probe  - now | pending | yyyy:MM:dd:HH:mm:ss.
Access: Online.
AC INI-Param: NqmProbingTable_StartTime"
       ::= {acSysNqmProbingEntry 9}



     acSysNqmProbingHistoryEntriesToKeep OBJECT-TYPE
       SYNTAX Unsigned32 (1..1000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Number of probing result entries to keep in the history file.
Access: Online.
AC INI-Param: NqmProbingTable_HistoryEntriesToKeep"
       ::= {acSysNqmProbingEntry 10}



     -- ****************************************
     -- acSysNqmResponder table declaration
     -- ****************************************
     acSysNqmResponderTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysNqmResponderEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {asSysNqm 23}



     -- ****************************************
     -- acSysNqmResponder table entry
     -- ****************************************
     acSysNqmResponderEntry OBJECT-TYPE
       SYNTAX AcSysNqmResponderEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysNqmResponderIndex}
       ::= {acSysNqmResponderTable 1}



     -- ****************************************
     -- acSysNqmResponder TABLE
     -- ****************************************
     AcSysNqmResponderEntry ::= SEQUENCE {
       acSysNqmResponderIndex                          Unsigned32,
       acSysNqmResponderRowStatus                      RowStatus,
       acSysNqmResponderAction                         INTEGER,
       acSysNqmResponderActionRes                      INTEGER,
       acSysNqmResponderResponderName                  SnmpAdminString,
       acSysNqmResponderActive                         Unsigned32,
       acSysNqmResponderLocalPort                      Unsigned32,
       acSysNqmResponderSourceInterfaceName            RowPointer
     }



     acSysNqmResponderIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..9)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line. Internal parameter.
AC INI-Param: NqmResponderTable_Index"
       ::= {acSysNqmResponderEntry 1}



     acSysNqmResponderRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS field for line. Internal parameter.
AC INI-Param: NqmResponderTable_RowStatus"
       ::= {acSysNqmResponderEntry 2}



     acSysNqmResponderAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: NqmResponderTable_Action"
       ::= {acSysNqmResponderEntry 3}



     acSysNqmResponderActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: NqmResponderTable_ActionRes"
       ::= {acSysNqmResponderEntry 4}



     acSysNqmResponderResponderName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..64))
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Responder descriptive name.
Access: Online.
AC INI-Param: NqmResponderTable_ResponderName"
       ::= {acSysNqmResponderEntry 5}



     acSysNqmResponderActive OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Responder Enable.
Access: Online.
AC INI-Param: NqmResponderTable_Active"
       ::= {acSysNqmResponderEntry 6}



     acSysNqmResponderLocalPort OBJECT-TYPE
       SYNTAX Unsigned32 (3900..3990)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Local transport layer port number.
Ports are: 3900, 3910, 3920, 3930, 3940, 3950, 3960, 3970,
3980, 3990.
Access: Online.
AC INI-Param: NqmResponderTable_LocalPort"
       ::= {acSysNqmResponderEntry 7}



     acSysNqmResponderSourceInterfaceName OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Name of source interface.
Access: Online.
AC INI-Param: NqmResponderTable_SourceInterfaceName"
       ::= {acSysNqmResponderEntry 8}



     acSysLicenseServer OBJECT IDENTIFIER ::= {acSystemConfiguration 17}


     acSysLicenseServerPrimaryIP OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Defines the primary IP address for license pool server.
Access: Online.
AC INI-Param: LicenseServerPrimaryIP"
       ::= {acSysLicenseServer 1}



     acSysLicenseServerSecondaryIP OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Defines the secondary IP address for license pool server.
Access: Online.
AC INI-Param: LicenseServerSecondaryIP"
       ::= {acSysLicenseServer 2}



     acSysLicenseServerPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65536)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the port number for the license pool server.
Access: Online.
AC INI-Param: LicenseServerPort"
       ::= {acSysLicenseServer 3}



     acSysLicenseServerUsername OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the user name to access the license pool server.
Access: Online.
AC INI-Param: LicenseServerUsername"
       ::= {acSysLicenseServer 4}



     acSysLicenseServerPassword OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the password to access the license pool server.
Access: Online.
AC INI-Param: LicenseServerPwd"
       ::= {acSysLicenseServer 5}



     acSysLicenseServerEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables license pool server.
Access: Online.
AC INI-Param: LicenseServerEnable"
       ::= {acSysLicenseServer 6}



     acSysLicenseServerActionStatus OBJECT-TYPE
       SYNTAX INTEGER {
                  failure(0)
,
                  inProgress(1)
,
                  success(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "License server action status.
AC INI-Param: LicensePoolEMSStatus"
       ::= {acSysLicenseServer 7}



     acSysLicenseServerPrimaryAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the primary IP address for license pool server.
IP Address (can be either IPv4 or IPv6) for this interface.
Access: Online.
AC INI-Param: LicenseServerPrimaryIP"
       ::= {acSysLicenseServer 8}



     acSysLicenseServerSecondaryAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the secondary IP address for license pool server.
IP Address (can be either IPv4 or IPv6) for this interface.
Access: Online.
AC INI-Param: LicenseServerSecondaryIP"
       ::= {acSysLicenseServer 9}



     acSysFloatingLicense OBJECT IDENTIFIER ::= {acSystemConfiguration 18}


     acSysFloatingLicenseEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "FL: Floating License mode flag.
Access: Offline.
AC INI-Param: ENABLEFLOATINGLICENSE"
       ::= {acSysFloatingLicense 1}



     acSysFloatingLicensePrimaryIP OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "IP address for the Floating License server.
Access: Instant.
AC INI-Param: FLOATINGLICENSEPRIMARYIP"
       ::= {acSysFloatingLicense 2}



     acSysFloatingLicenseSecondaryIP OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Defines the secondary IP address of the floating license server.
Access: Instant.
AC INI-Param: FLOATINGLICENSEPRIMARYIP"
       ::= {acSysFloatingLicense 3}



     acSysFloatingLicensePort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65536)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "The port of Floating License server.
Access: Instant.
AC INI-Param: FLOATINGLICENSEPORT"
       ::= {acSysFloatingLicense 4}



     acSysFloatingLicenseUsername OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Username for the Floating License server.
Access: Instant.
AC INI-Param: FLOATINGLICENSEUSERNAME"
       ::= {acSysFloatingLicense 5}



     acSysFloatingLicensePassword OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Password for the Floating License server.
Access: Instant.
AC INI-Param: FLOATINGLICENSEPASSWORD"
       ::= {acSysFloatingLicense 6}



     acSysFloatingLicenseUpdate OBJECT-TYPE
       SYNTAX INTEGER {
                  updateDone(0)
,
                  upadate(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Floating License Action.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysFloatingLicense 7}



     acSysFloatingLicenseServerStatus OBJECT-TYPE
       SYNTAX INTEGER {
                  notApplicable(0)
,
                  notConnected(1)
,
                  rejected(2)
,
                  temporaryDisconnected(3)
,
                  connected(4)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Floating License status.
AC INI-Param: N/A"
       ::= {acSysFloatingLicense 8}



     acSysFloatingLicenseOvocProductID OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "OVOC Product ID, SET by OVOC. It doesn't keep at persistence.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysFloatingLicense 9}



     acSysFloatingLicensePrimaryAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "IP address for the Floating License server.
IP Address (can be either IPv4 or IPv6) for this interface.
Access: Instant.
AC INI-Param: FLOATINGLICENSEPRIMARYIP"
       ::= {acSysFloatingLicense 10}



     acSystemStatus OBJECT IDENTIFIER ::= {acSystem 2}


     acSysType OBJECT IDENTIFIER ::= {acSystemStatus 1}


     acSysTypeProduct OBJECT-TYPE
       SYNTAX INTEGER {
                  acUnknown(0)
,
                  acTrunkPack-08(1)
,
                  acMediaPack-108(2)
,
                  acMediaPack-124(3)
,
                  acTrunkPack-1600(20)
,
                  acTPM1100(22)
,
                  acTrunkPack-260-IpMedia(23)
,
                  acTrunkPack-1610(24)
,
                  acMediaPack-104(25)
,
                  acMediaPack-102(26)
,
                  acTrunkPack-1610-SB(29)
,
                  acTrunkPack-1610-IpMedia(30)
,
                  acTrunkPack-MEDIANT2000(31)
,
                  acTrunkPack-STRETTO2000(32)
,
                  acTrunkPack-IPMServer2000(33)
,
                  acTrunkPack-2810(34)
,
                  acTrunkPack-260-UN-IpMedia (35)
,
                  acTrunkPack-260-IpMedia-30Ch(36)
,
                  acTrunkPack-260-IpMedia-60Ch(37)
,
                  acTrunkPack-260-IpMedia-120Ch(38)
,
                  acTrunkPack-260RT-IpMedia-30Ch(39)
,
                  acTrunkPack-260RT-IpMedia-60Ch(40)
,
                  acTrunkPack-260RT-IpMedia-120Ch(41)
,
                  acTrunkPack-260(42)
,
                  acTrunkPack-260-UN (43)
,
                  acTPM1100-PCM(44)
,
                  acTrunkPack-6310(45)
,
                  acTPM6300(46)
,
                  acMediant1000(47)
,
                  acIPMedia3000(48)
,
                  acMediant3000(49)
,
                  acStretto3000(50)
,
                  acTrunkPack-6310-IpMedia(51)
,
                  acTrunkPack-6310-SB(52)
,
                  acATP-1610(53)
,
                  acATP-260(54)
,
                  acATP-260-UN(55)
,
                  acMediaPack-118(56)
,
                  acMediaPack114(57)
,
                  acMediaPack112(58)
,
                   acTrunkPack-6310-T3(59)
,
                  acMediant3000-T3(60)
,
                  acIPmedia3000-T3(61)
,
                  acTrunkPack-6310-T3-IpMedia(62)
,
                  acTrunkPack-8410(63)
,
                  acTrunkPack-8410-IpMedia(64)
,
                  acMediant-600(65)
,
                  acTrunkPack-12610(66)
,
                  acMediant1000-MSBR(67)
,
                  acMediant-600-MSBR(68)
,
                  acMediant800-MSBR(69)
,
                  acMediant-4000(70)
,
                  acMediant1000-ESBC(71)
,
                  acMediant800-ESBC(72)
,
                  acHosted(73)
,
                  acMediant-800B-MSBR(74)
,
                  acMediant-800B-ESBC(75)
,
                  acMediant-500-MSBR(76)
,
                  acMediant-500-ESBC(77)
,
                  acMediant-2600(78)
,
                  acMediant-VE-SBC(79)
,
                  acMediant-VE-H-SBC(80)
,
                  acMediant-SE-SBC(81)
,
                  acMediant-SE-H-SBC(82)
,
                  acMediant-9000-SBC(83)
,
                  acMediant-500L-MSBR(84)
,
                  acMediant-500L-ESBC(85)
,
                  acMediaPack-1288(86)
,
                  acMediaTranscoder(87)
,
                  acVirtualMediaTranscoder(88)
,
                  acMediant-500NG(89)
,
                  acMediant-3100(90)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The type of the Board.
AC INI-Param: N/A"
       ::= {acSysType 1}



     acSysTypeDSP OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Dsp Type.
AC INI-Param: N/A"
       ::= {acSysType 2}



     acSysTypeModule OBJECT-TYPE
       SYNTAX INTEGER {
                  soloist (0)
,
                  second(1)
,
                  first(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acSysType 3}



     acSysTypeCPUSpeed OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "CPU Speed.
AC INI-Param: N/A"
       ::= {acSysType 4}



     acSysTypeOSType OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "OS Type. Applicable to Hosted only.
AC INI-Param: N/A"
       ::= {acSysType 5}



     acSysVersion OBJECT IDENTIFIER ::= {acSystemStatus 2}


     acSysVersionSoftware OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TrunkPack Software Version.
AC INI-Param: N/A"
       ::= {acSysVersion 1}



     acSysVersionFlash OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Flash [BootLoader] Version.
AC INI-Param: N/A"
       ::= {acSysVersion 2}



     acSysVersionIniFile OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Ini file version.
AC INI-Param: INIFileVersion"
       ::= {acSysVersion 3}



     acSysVersionSoftwareDate OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..40))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "TrunkPack Software Date.
AC INI-Param: N/A"
       ::= {acSysVersion 4}



     acSysId OBJECT IDENTIFIER ::= {acSystemStatus 3}


     acSysIdName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The name fo the board.
AC INI-Param: N/A"
       ::= {acSysId 1}



     acSysIdSerialNumber OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "serial number of board.
AC INI-Param: N/A"
       ::= {acSysId 2}



     acSysIdSlotNumber OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Slot number.
AC INI-Param: N/A"
       ::= {acSysId 3}



     acSysIdFirstSerialNumber OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The device's first serial number.
When the device is part of a dual module board this is the
first module's serial number.
When the device is the first module in a dual module or the
device is not in a dual module board, the values for asSysIdSerialNumber
and acSysIdFirstSerialNumber are the same.
AC INI-Param: N/A"
       ::= {acSysId 4}



     acSysIdSerialNumberString OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "System's serial number represented as string.
AC INI-Param: N/A"
       ::= {acSysId 5}



     acSysIdProductClass OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Identifier of the product class of the associated Device. An
empty string indicates
either that there is no associated Device that has been detected,
or the Device does not support the use of the
product-class parameter. Same as CWMP (TR069) ProductClass
object. 
INI - TR069CustomerProductClass.
AC INI-Param: N/A"
       ::= {acSysId 6}



     acSysIdModelName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Model name of the device (human readable string). 
Same as CWMP (TR069) ModelName object.
AC INI-Param: N/A"
       ::= {acSysId 7}



     acSysCount OBJECT IDENTIFIER ::= {acSystemStatus 4}


     acSysCountDSPs OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "DSP Count.
AC INI-Param: N/A"
       ::= {acSysCount 1}



     acSysCountChannels OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Channel Count.
Analog or Mixed board - the returned value is the number of
analog channels.
Digital board - the number of digitial channels.
AC INI-Param: N/A"
       ::= {acSysCount 2}



     acSysCountTrunks OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Trunks Count.
AC INI-Param: N/A"
       ::= {acSysCount 3}



     acSysState OBJECT IDENTIFIER ::= {acSystemStatus 5}


     acSysStateTemperature OBJECT-TYPE
       SYNTAX Unsigned32 (0..100)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Temperature of the board in degrees Celsius, should not go higher
then 60!.
AC INI-Param: N/A"
       ::= {acSysState 1}



     acSysStateOperational OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(1)
,
                  enabled(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The operational state of the gateway.
AC INI-Param: N/A"
       ::= {acSysState 2}



     acSysStateHAupdateInProgress OBJECT-TYPE
       SYNTAX INTEGER {
                  updateDone(1)
,
                  updateInProgress(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Indicates during update process, which done between active and
redundant boards.
AC INI-Param: N/A"
       ::= {acSysState 3}



     acSysStateGWSeverity OBJECT-TYPE
       SYNTAX INTEGER {
                  noAlarm(0)
,
                  indeterminate(1)
,
                  warning(2)
,
                  minor(3)
,
                  major(4)
,
                  critical(5)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The highest alarm severity on the device.
AC INI-Param: N/A"
       ::= {acSysState 4}



     acSysStateIsPstnManagementEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Is Pstn Management Enable
0 - Disable
1 - Enable.
AC INI-Param: N/A"
       ::= {acSysState 5}



     acSysStateErrorMessage OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..512))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Error Messages from the board.
AC INI-Param: N/A"
       ::= {acSysState 6}



     acSysStateErrorID OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Error Message ID.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysState 7}



     acSysStateDataCpuUtilization OBJECT-TYPE
       SYNTAX Unsigned32 (0..100)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Data CPU usage in percentage.
AC INI-Param: N/A"
       ::= {acSysState 8}



     acSysStateDataMemoryUtilization OBJECT-TYPE
       SYNTAX Unsigned32 (0..100)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Data memory usage in percentage.
AC INI-Param: N/A"
       ::= {acSysState 9}



     acSysStateVoIpCpuUtilization OBJECT-TYPE
       SYNTAX Unsigned32 (0..100)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Voice CPU usage in percentage.
AC INI-Param: N/A"
       ::= {acSysState 10}



     acSysStateVoIpMemoryUtilization OBJECT-TYPE
       SYNTAX Unsigned32 (0..100)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Voice memory usage in percentage.
AC INI-Param: N/A"
       ::= {acSysState 11}



     acSysStateManagedByEMS OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enabled(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "EMS support indication.
if FeatureKey exists returns the value of EMS element in FeatureKey,
else returns disabled.
AC INI-Param: N/A"
       ::= {acSysState 12}



     acSysStateMonitoredBySEM OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enabled(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Managed by SEM indication.
.
AC INI-Param: N/A"
       ::= {acSysState 13}



     acSysStateBurnFlag OBJECT-TYPE
       SYNTAX INTEGER {
                  burnFlagOFF(0)
,
                  burnFlagON(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Current configuration was changed
 burn action is needed.
AC INI-Param: N/A"
       ::= {acSysState 14}



     acSysStateResetFlag OBJECT-TYPE
       SYNTAX INTEGER {
                  resetFlagOFF(0)
,
                  resetFlagON(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Offline parameter was changed
 restart action is needed.
AC INI-Param: N/A"
       ::= {acSysState 15}



     acSysNetwork OBJECT IDENTIFIER ::= {acSystemStatus 6}


     acSysEthernet OBJECT IDENTIFIER ::= {acSysNetwork 1}


     acSysEthernetFirstPortDuplexMode OBJECT-TYPE
       SYNTAX INTEGER {
                  halfDuplex(0)
,
                  fullDuplex(1)
,
                  forceModeValue(2)
,
                  notAvailable(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "full-duplex or half-duplex connection.
AC INI-Param: N/A"
       ::= {acSysEthernet 1}



     acSysEthernetFirstPortSpeed OBJECT-TYPE
       SYNTAX INTEGER {
                  forceModeValue(2)
,
                  notAvailable(3)
,
                  ac10Mbps(10)
,
                  ac100Mbps(100)
,
                  ac1000Mbps(1000)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acSysEthernet 2}



     acSysEthernetSecondPortDuplexMode OBJECT-TYPE
       SYNTAX INTEGER {
                  halfDuplex(0)
,
                  fullDuplex(1)
,
                  forceModeValue(2)
,
                  notAvailable(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "full-duplex or half-duplex connection.
AC INI-Param: N/A"
       ::= {acSysEthernet 3}



     acSysEthernetSecondPortSpeed OBJECT-TYPE
       SYNTAX INTEGER {
                  forceModeValue(2)
,
                  notAvailable(3)
,
                  ac10Mbps(10)
,
                  ac100Mbps(100)
,
                  ac1000Mbps(1000)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acSysEthernet 4}



     acSysEthernetActivePortNumber OBJECT-TYPE
       SYNTAX Unsigned32 (0..2)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Display the current active ethernet port number.
0 - not relevant.
AC INI-Param: N/A"
       ::= {acSysEthernet 5}



     acSysEthernetPowerBudget OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Display the availbale power budget for the system.
AC INI-Param: N/A"
       ::= {acSysEthernet 6}



     acSysEthernetPowerAllocated OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Display the allocated power in the system.
AC INI-Param: N/A"
       ::= {acSysEthernet 7}



     acSysEthernetPowerRemaining OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Display the availbale remaining power in the system.
AC INI-Param: N/A"
       ::= {acSysEthernet 8}



     -- ****************************************
     -- acSysEthernetStatus table declaration
     -- ****************************************
     acSysEthernetStatusTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysEthernetStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Ethernet relevant information"
       ::= {acSysEthernet 21}



     -- ****************************************
     -- acSysEthernetStatus table entry
     -- ****************************************
     acSysEthernetStatusEntry OBJECT-TYPE
       SYNTAX AcSysEthernetStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysEthernetStatusIndex}
       ::= {acSysEthernetStatusTable 1}



     -- ****************************************
     -- acSysEthernetStatus TABLE
     -- ****************************************
     AcSysEthernetStatusEntry ::= SEQUENCE {
       acSysEthernetStatusIndex                        Unsigned32,
       acSysEthernetStatusPortDuplexMode               INTEGER,
       acSysEthernetStatusPortSpeed                    INTEGER,
       acSysEthernetStatusActivePortNumber             INTEGER,
       acSysEthernetStatusPortState                    INTEGER,
       acSysEthernetStatusPowerOverEthernet            INTEGER,
       acSysEthernetStatusAllocatedPower               SnmpAdminString,
       acSysEthernetStatusGroup                        SnmpAdminString,
       acSysEthernetStatusPowerOverEthernetDetails     SnmpAdminString,
       acSysEthernetStatusPortType                     INTEGER
     }



     acSysEthernetStatusIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..12)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "The row's index.
On 8410 Systems:
Index 1  related to GBE port no.1 in the TER (Media).
Index 2  related to GBE port no.2 in the TER (Media).
Index 3  related to port 1A in PEM #1 (Control).
 Index 4  related to port 1B in PEM #2 (Control).
Index 5  related to port 2A in PEM #1 (OAM).
Index 6  related to port 2B in PEM #2 (OAM). 
On MSBR only:
1-12 LAN interfaces.
AC INI-Param: N/A"
       ::= {acSysEthernetStatusEntry 1}



     acSysEthernetStatusPortDuplexMode OBJECT-TYPE
       SYNTAX INTEGER {
                  halfDuplex(0)
,
                  fullDuplex(1)
,
                  forceModeValue(2)
,
                  notAvailable(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "full-duplex or half-duplex connection.
AC INI-Param: N/A"
       ::= {acSysEthernetStatusEntry 2}



     acSysEthernetStatusPortSpeed OBJECT-TYPE
       SYNTAX INTEGER {
                  forceModeValue(2)
,
                  notAvailable(3)
,
                  ac10Mbps(10)
,
                  ac100Mbps(100)
,
                  ac1000Mbps(1000)
,
                  ac10Gbps(10000)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "port speed.
AC INI-Param: N/A"
       ::= {acSysEthernetStatusEntry 3}



     acSysEthernetStatusActivePortNumber OBJECT-TYPE
       SYNTAX INTEGER {
                  notActive(0)
,
                  active(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Status of ethernet port - active or not active.
AC INI-Param: N/A"
       ::= {acSysEthernetStatusEntry 4}



     acSysEthernetStatusPortState OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(0)
,
                  blocking(1)
,
                  learning(2)
,
                  forwarding(3)
,
                  notApplicable(10)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Port State.
AC INI-Param: N/A"
       ::= {acSysEthernetStatusEntry 5}



     acSysEthernetStatusPowerOverEthernet OBJECT-TYPE
       SYNTAX INTEGER {
                  notApplicable(0)
,
                  active(1)
,
                  notActive(2)
,
                  poeAlarm(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Power over Ethernet interface status.
AC INI-Param: N/A"
       ::= {acSysEthernetStatusEntry 6}



     acSysEthernetStatusAllocatedPower OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Power consumed by the port.
AC INI-Param: N/A"
       ::= {acSysEthernetStatusEntry 7}



     acSysEthernetStatusGroup OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The group which the port is a member of.
AC INI-Param: N/A"
       ::= {acSysEthernetStatusEntry 8}



     acSysEthernetStatusPowerOverEthernetDetails OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Power over Ethernet interface status details.
AC INI-Param: N/A"
       ::= {acSysEthernetStatusEntry 9}



     acSysEthernetStatusPortType OBJECT-TYPE
       SYNTAX INTEGER {
                  notApplicable(0)
,
                  gigabitEthernet(1)
,
                  fastEthernet(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Port Type.
AC INI-Param: N/A"
       ::= {acSysEthernetStatusEntry 10}



     -- ****************************************
     -- acSysWanStatus table declaration
     -- ****************************************
     acSysWanStatusTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysWanStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Ethernet relevant information"
       ::= {acSysEthernet 22}



     -- ****************************************
     -- acSysWanStatus table entry
     -- ****************************************
     acSysWanStatusEntry OBJECT-TYPE
       SYNTAX AcSysWanStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysWanStatusIndex}
       ::= {acSysWanStatusTable 1}



     -- ****************************************
     -- acSysWanStatus TABLE
     -- ****************************************
     AcSysWanStatusEntry ::= SEQUENCE {
       acSysWanStatusIndex                             Unsigned32,
       acSysWanStatusPortType                          INTEGER,
       acSysWanStatusPortDuplexMode                    INTEGER,
       acSysWanStatusPortSpeed                         INTEGER,
       acSysWanStatusActivePortNumber                  INTEGER,
       acSysWanStatusPortState                         INTEGER,
       acSysWanStatusPowerOverEthernet                 INTEGER
     }



     acSysWanStatusIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..4)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "The row's index.
On MSBR Only.
AC INI-Param: N/A"
       ::= {acSysWanStatusEntry 1}



     acSysWanStatusPortType OBJECT-TYPE
       SYNTAX INTEGER {
                  ethernet(0)
,
                  t1(1)
,
                  sHDSL(2)
,
                  adslVdsl(3)
,
                  invalidPhyType(4)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acSysWanStatusEntry 2}



     acSysWanStatusPortDuplexMode OBJECT-TYPE
       SYNTAX INTEGER {
                  halfDuplex(0)
,
                  fullDuplex(1)
,
                  forceModeValue(2)
,
                  notAvailable(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "full-duplex or half-duplex connection.
AC INI-Param: N/A"
       ::= {acSysWanStatusEntry 3}



     acSysWanStatusPortSpeed OBJECT-TYPE
       SYNTAX INTEGER {
                  forceModeValue(2)
,
                  notAvailable(3)
,
                  ac10Mbps(10)
,
                  ac100Mbps(100)
,
                  ac1000Mbps(1000)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "port speed.
AC INI-Param: N/A"
       ::= {acSysWanStatusEntry 4}



     acSysWanStatusActivePortNumber OBJECT-TYPE
       SYNTAX INTEGER {
                  notActive(0)
,
                  active(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Status of ethernet port - active or not active.
AC INI-Param: N/A"
       ::= {acSysWanStatusEntry 5}



     acSysWanStatusPortState OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(0)
,
                  blocking(1)
,
                  learning(2)
,
                  forwarding(3)
,
                  notApplicable(10)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Port State.
AC INI-Param: N/A"
       ::= {acSysWanStatusEntry 6}



     acSysWanStatusPowerOverEthernet OBJECT-TYPE
       SYNTAX INTEGER {
                  notApplicable(0)
,
                  active(1)
,
                  notActive(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Power over Ethernet interface status.
AC INI-Param: N/A"
       ::= {acSysWanStatusEntry 7}



     -- ****************************************
     -- acSysEthernetRedundantStatus table declaration
     -- ****************************************
     acSysEthernetRedundantStatusTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysEthernetRedundantStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Ethernet relevant information for redundant board (relevant for HA system).  {@}Relevant only to M4K."
       ::= {acSysEthernet 23}



     -- ****************************************
     -- acSysEthernetRedundantStatus table entry
     -- ****************************************
     acSysEthernetRedundantStatusEntry OBJECT-TYPE
       SYNTAX AcSysEthernetRedundantStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysEthernetRedundantStatusIndex}
       ::= {acSysEthernetRedundantStatusTable 1}



     -- ****************************************
     -- acSysEthernetRedundantStatus TABLE
     -- ****************************************
     AcSysEthernetRedundantStatusEntry ::= SEQUENCE {
       acSysEthernetRedundantStatusIndex               Unsigned32,
       acSysEthernetRedundantStatusPortDuplexMode      INTEGER,
       acSysEthernetRedundantStatusPortSpeed           INTEGER,
       acSysEthernetRedundantStatusActivePortNumber    INTEGER,
       acSysEthernetRedundantStatusPortState           INTEGER,
       acSysEthernetRedundantStatusPowerOverEthernet   INTEGER,
       acSysEthernetRedundantStatusAllocatedPower      SnmpAdminString,
       acSysEthernetRedundantStatusGroup               SnmpAdminString,
       acSysEthernetRedundantStatusPowerOverEthernetDetails 
                                                       SnmpAdminString
     }



     acSysEthernetRedundantStatusIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..12)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "The row's index.
On MSBR only:
1-12 LAN interfaces.
AC INI-Param: N/A"
       ::= {acSysEthernetRedundantStatusEntry 1}



     acSysEthernetRedundantStatusPortDuplexMode OBJECT-TYPE
       SYNTAX INTEGER {
                  halfDuplex(0)
,
                  fullDuplex(1)
,
                  forceModeValue(2)
,
                  notAvailable(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "full-duplex or half-duplex connection.
AC INI-Param: N/A"
       ::= {acSysEthernetRedundantStatusEntry 2}



     acSysEthernetRedundantStatusPortSpeed OBJECT-TYPE
       SYNTAX INTEGER {
                  forceModeValue(2)
,
                  notAvailable(3)
,
                  ac10Mbps(10)
,
                  ac100Mbps(100)
,
                  ac1000Mbps(1000)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "port speed.
AC INI-Param: N/A"
       ::= {acSysEthernetRedundantStatusEntry 3}



     acSysEthernetRedundantStatusActivePortNumber OBJECT-TYPE
       SYNTAX INTEGER {
                  notActive(0)
,
                  active(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Status of ethernet port - active or not active.
AC INI-Param: N/A"
       ::= {acSysEthernetRedundantStatusEntry 4}



     acSysEthernetRedundantStatusPortState OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(0)
,
                  blocking(1)
,
                  learning(2)
,
                  forwarding(3)
,
                  notApplicable(10)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Port State.
AC INI-Param: N/A"
       ::= {acSysEthernetRedundantStatusEntry 5}



     acSysEthernetRedundantStatusPowerOverEthernet OBJECT-TYPE
       SYNTAX INTEGER {
                  notApplicable(0)
,
                  active(1)
,
                  notActive(2)
,
                  poeAlarm(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Power over Ethernet interface status.
AC INI-Param: N/A"
       ::= {acSysEthernetRedundantStatusEntry 6}



     acSysEthernetRedundantStatusAllocatedPower OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Power consumed by the port.
AC INI-Param: N/A"
       ::= {acSysEthernetRedundantStatusEntry 7}



     acSysEthernetRedundantStatusGroup OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The group which the port is a member of.
AC INI-Param: N/A"
       ::= {acSysEthernetRedundantStatusEntry 8}



     acSysEthernetRedundantStatusPowerOverEthernetDetails OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Power over Ethernet interface status details.
AC INI-Param: N/A"
       ::= {acSysEthernetRedundantStatusEntry 9}



     -- ****************************************
     -- acSysMultiWanStatus table declaration
     -- ****************************************
     acSysMultiWanStatusTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysMultiWanStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysEthernet 24}



     -- ****************************************
     -- acSysMultiWanStatus table entry
     -- ****************************************
     acSysMultiWanStatusEntry OBJECT-TYPE
       SYNTAX AcSysMultiWanStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysMultiWanStatusSite,acSysMultiWanStatusPort}
       ::= {acSysMultiWanStatusTable 1}



     -- ****************************************
     -- acSysMultiWanStatus TABLE
     -- ****************************************
     AcSysMultiWanStatusEntry ::= SEQUENCE {
       acSysMultiWanStatusSite                         Unsigned32,
       acSysMultiWanStatusPort                         Unsigned32,
       acSysMultiWanStatusType                         INTEGER,
       acSysMultiWanStatusStatus                       INTEGER
     }



     acSysMultiWanStatusSite OBJECT-TYPE
       SYNTAX Unsigned32 (0..4)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "The Site index.
AC INI-Param: N/A"
       ::= {acSysMultiWanStatusEntry 1}



     acSysMultiWanStatusPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..3)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "The Port relative Index.
AC INI-Param: N/A"
       ::= {acSysMultiWanStatusEntry 2}



     acSysMultiWanStatusType OBJECT-TYPE
       SYNTAX INTEGER {
                  ethernet(0)
,
                  t1(1)
,
                  e1(2)
,
                  sHDSL(3)
,
                  adslVdsl(4)
,
                  gPON(5)
,
                  geSFP(6)
,
                  invalidPhyType(7)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "wan type of the port.
AC INI-Param: N/A"
       ::= {acSysMultiWanStatusEntry 3}



     acSysMultiWanStatusStatus OBJECT-TYPE
       SYNTAX INTEGER {
                  inactive(0)
,
                  working(1)
,
                  process(2)
,
                  unknown(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "status of the wan port.
AC INI-Param: N/A"
       ::= {acSysMultiWanStatusEntry 4}



     acSysNAT OBJECT IDENTIFIER ::= {acSysNetwork 2}


     acSysNATType OBJECT-TYPE
       SYNTAX INTEGER {
                  stunDisabled(-1)
,
                  none(0)
,
                  fullCone(1)
,
                  restricted(2)
,
                  portRestricted(3)
,
                  symmetric(4)
,
                  symmetricFireWall(5)
,
                  blocked(6)
,
                  unknown(7)
,
                  natIdentificationInProgress(10)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Identified NAT type.
-1 - STUN client is disabled
0 - None
1 - FullCone
2 - Restricted
3 - PortRestricted
4 - Symmetric
5 - SymmetricFireWall
6 - Blocked
7 - Unknown
10 - NAT identification in progress.
AC INI-Param: N/A"
       ::= {acSysNAT 1}



     acSysWebStat OBJECT IDENTIFIER ::= {acSysNetwork 3}


     acSysWebStatPasswordControlViaSNMP OBJECT-TYPE
       SYNTAX INTEGER {
                  disabled(0)
,
                  enabled(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "If set to 1 it will allow changing the web interface username
and password via SNMP.
AC INI-Param: WEBPasswordControlViaSNMP "
       ::= {acSysWebStat 1}



     acSysIPStatus OBJECT IDENTIFIER ::= {acSysNetwork 4}


     -- ****************************************
     -- acSysInterfaceStatus table declaration
     -- ****************************************
     acSysInterfaceStatusTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysInterfaceStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysIPStatus 21}



     -- ****************************************
     -- acSysInterfaceStatus table entry
     -- ****************************************
     acSysInterfaceStatusEntry OBJECT-TYPE
       SYNTAX AcSysInterfaceStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysInterfaceStatusEntryIndex,acSysInterfaceStatusTypeIndex}
       ::= {acSysInterfaceStatusTable 1}



     -- ****************************************
     -- acSysInterfaceStatus TABLE
     -- ****************************************
     AcSysInterfaceStatusEntry ::= SEQUENCE {
       acSysInterfaceStatusEntryIndex                  Unsigned32,
       acSysInterfaceStatusTypeIndex                   Unsigned32,
       acSysInterfaceStatusApplicationTypes            INTEGER,
       acSysInterfaceStatusMode                        INTEGER,
       acSysInterfaceStatusIPAddress                   SnmpAdminString,
       acSysInterfaceStatusPrefixLength                Unsigned32,
       acSysInterfaceStatusGateway                     SnmpAdminString,
       acSysInterfaceStatusVlanID                      Integer32,
       acSysInterfaceStatusName                        SnmpAdminString,
       acSysInterfaceStatusRelatedIndex                Integer32,
       acSysInterfaceStatusPrimaryDNSServerIPAddress   SnmpAdminString,
       acSysInterfaceStatusSecondaryDNSServerIPAddress SnmpAdminString,
       acSysInterfaceStatusUnderlyingDevice            SnmpAdminString
     }



     acSysInterfaceStatusEntryIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..47)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 1}



     acSysInterfaceStatusTypeIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "
1 - IP Address.
2 - IPv6 Link-Local Address.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 2}



     acSysInterfaceStatusApplicationTypes OBJECT-TYPE
       SYNTAX INTEGER {
                  oam(0)
,
                  media(1)
,
                  control(2)
,
                  oamAndMedia(3)
,
                  oamAndControl(4)
,
                  mediaAndControl(5)
,
                  oamAndMediaAndControl(6)
,
                  data(11)
,
                  maintenance(99)
,
                  internal(100)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The type assigned to the interface.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 3}



     acSysInterfaceStatusMode OBJECT-TYPE
       SYNTAX INTEGER {
                  iPv6PrefixManual(3)
,
                  iPv6Manual(4)
,
                  iPv4Manual(10)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Interface configuration mode.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 4}



     acSysInterfaceStatusIPAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "IP Address (can be either IPv4 or IPv6) for this interface.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 5}



     acSysInterfaceStatusPrefixLength OBJECT-TYPE
       SYNTAX Unsigned32 (0..128)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The number of 1 bits in this interfaces netmask.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 6}



     acSysInterfaceStatusGateway OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Default Gateway.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 7}



     acSysInterfaceStatusVlanID OBJECT-TYPE
       SYNTAX Integer32 (-1..4094)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "VLAN ID of this interface.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 8}



     acSysInterfaceStatusName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..15))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "16 character string of this interfaces name.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 9}



     acSysInterfaceStatusRelatedIndex OBJECT-TYPE
       SYNTAX Integer32 (-1..47)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Related Interface index in the interface configuration table
(in case the table is empty - meaning there is only single
IP the index will appear with 0).
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 10}



     acSysInterfaceStatusPrimaryDNSServerIPAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Secondary DNS server IP address.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 11}



     acSysInterfaceStatusSecondaryDNSServerIPAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Primary DNS server IP address.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 12}



     acSysInterfaceStatusUnderlyingDevice OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..17))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Underlying Device.
AC INI-Param: N/A"
       ::= {acSysInterfaceStatusEntry 13}



     -- ****************************************
     -- acSysDataInterfaceStatus table declaration
     -- ****************************************
     acSysDataInterfaceStatusTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysDataInterfaceStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysIPStatus 22}



     -- ****************************************
     -- acSysDataInterfaceStatus table entry
     -- ****************************************
     acSysDataInterfaceStatusEntry OBJECT-TYPE
       SYNTAX AcSysDataInterfaceStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysDataInterfaceStatusIndex}
       ::= {acSysDataInterfaceStatusTable 1}



     -- ****************************************
     -- acSysDataInterfaceStatus TABLE
     -- ****************************************
     AcSysDataInterfaceStatusEntry ::= SEQUENCE {
       acSysDataInterfaceStatusIndex                   Unsigned32,
       acSysDataInterfaceStatusName                    SnmpAdminString,
       acSysDataInterfaceStatusIPAddress               SnmpAdminString,
       acSysDataInterfaceStatusNetmask                 SnmpAdminString,
       acSysDataInterfaceStatusInfo                    SnmpAdminString,
       acSysDataInterfaceStatusDescription             SnmpAdminString,
       acSysDataInterfaceStatusOperationalState        INTEGER,
       acSysDataInterfaceStatusStateTime               SnmpAdminString,
       acSysDataInterfaceStatusUptime                  SnmpAdminString,
       acSysDataInterfaceStatusMtuMode                 SnmpAdminString,
       acSysDataInterfaceStatusDnsStatus               SnmpAdminString,
       acSysDataInterfaceStatusRxPackets               Counter32,
       acSysDataInterfaceStatusRxBytes                 Counter32,
       acSysDataInterfaceStatusRxDropped               Counter32,
       acSysDataInterfaceStatusRxErrors                Counter32,
       acSysDataInterfaceStatusTxPackets               Counter32,
       acSysDataInterfaceStatusTxBytes                 Counter32,
       acSysDataInterfaceStatusTxDropped               Counter32,
       acSysDataInterfaceStatusTxErrors                Counter32,
       acSysDataInterfaceStatusMinutes                 Unsigned32,
       acSysDataInterfaceStatusMinuteInputRate         SnmpAdminString,
       acSysDataInterfaceStatusMinuteOutputRate        SnmpAdminString,
       acSysDataInterfaceStatusSeconds                 Unsigned32,
       acSysDataInterfaceStatusSecondInputRate         SnmpAdminString,
       acSysDataInterfaceStatusSecondOutputRate        SnmpAdminString
     }



     acSysDataInterfaceStatusIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..69)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 1}



     acSysDataInterfaceStatusName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..70))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Interface name.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 2}



     acSysDataInterfaceStatusIPAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "IPv4 Address for this interface.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 3}



     acSysDataInterfaceStatusNetmask OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..45))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Netmask for this interface.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 4}



     acSysDataInterfaceStatusInfo OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..30))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Status of interface can be one of the following: Unknown, Disabled,
Enabled, Connected or Disconnected.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 5}



     acSysDataInterfaceStatusDescription OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..30))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Description of the interface.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 6}



     acSysDataInterfaceStatusOperationalState OBJECT-TYPE
       SYNTAX INTEGER {
                  down(0)
,
                  up(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Protocol is UP or Down.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 7}



     acSysDataInterfaceStatusStateTime OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..9))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Time elapsed since the interface entered its current state (HH:MM:SS).
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 8}



     acSysDataInterfaceStatusUptime OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..9))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Time since the interface was created (HH:MM:SS).
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 9}



     acSysDataInterfaceStatusMtuMode OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "the Maximum Transmission Unit (MTU) on the specified interface.
Can be: automatically, DHCP or value (in bytes).
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 10}



     acSysDataInterfaceStatusDnsStatus OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "DNS servers information for this interface.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 11}



     acSysDataInterfaceStatusRxPackets OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Total packets received.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 12}



     acSysDataInterfaceStatusRxBytes OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Total bytes received.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 13}



     acSysDataInterfaceStatusRxDropped OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "No space in receive buffers available.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 14}



     acSysDataInterfaceStatusRxErrors OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Bad packets received.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 15}



     acSysDataInterfaceStatusTxPackets OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Total packets transmitted.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 16}



     acSysDataInterfaceStatusTxBytes OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Total bytes transmitted.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 17}



     acSysDataInterfaceStatusTxDropped OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "No space in transmit buffers available.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 18}



     acSysDataInterfaceStatusTxErrors OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Packet transmit problems.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 19}



     acSysDataInterfaceStatusMinutes OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "This value determines time interval in minutes, on which the
rate sampling is done. The value is relevant to the columns
MinuteInputRate and MinuteOutputRate.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 20}



     acSysDataInterfaceStatusMinuteInputRate OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The average  received bits  rate (bps) and packets rate (pps)
during the last acSysDataInterfaceStatusMinutes minutes.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 21}



     acSysDataInterfaceStatusMinuteOutputRate OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The average  transmitted bits  rate (bps) and packets rate (pps)
during the last acSysDataInterfaceStatusMinutes minutes.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 22}



     acSysDataInterfaceStatusSeconds OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "This value determines time interval in seconds on which the
rate sampling is done. The value is relevant to the columns
SecondInputRate and SecondOutputRate.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 23}



     acSysDataInterfaceStatusSecondInputRate OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The average  received bits rate (bps) and packets rate (pps)
during the last acSysDataInterfaceStatusSeconds seconds.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 24}



     acSysDataInterfaceStatusSecondOutputRate OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The average transmitted bits rate (bps) and packets rate (pps)
during the last acSysDataInterfaceStatusSeconds seconds.
AC INI-Param: N/A"
       ::= {acSysDataInterfaceStatusEntry 25}



     acSysDeviceStatus OBJECT IDENTIFIER ::= {acSysNetwork 5}


     -- ****************************************
     -- acSysEthernetDeviceStatus table declaration
     -- ****************************************
     acSysEthernetDeviceStatusTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysEthernetDeviceStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysDeviceStatus 21}



     -- ****************************************
     -- acSysEthernetDeviceStatus table entry
     -- ****************************************
     acSysEthernetDeviceStatusEntry OBJECT-TYPE
       SYNTAX AcSysEthernetDeviceStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysEthernetDeviceStatusIndex}
       ::= {acSysEthernetDeviceStatusTable 1}



     -- ****************************************
     -- acSysEthernetDeviceStatus TABLE
     -- ****************************************
     AcSysEthernetDeviceStatusEntry ::= SEQUENCE {
       acSysEthernetDeviceStatusIndex                  Unsigned32,
       acSysEthernetDeviceStatusVlanID                 Unsigned32,
       acSysEthernetDeviceStatusUnderlyingInterface    RowPointer,
       acSysEthernetDeviceStatusDeviceName             SnmpAdminString
     }



     acSysEthernetDeviceStatusIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..47)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Device Index.
AC INI-Param: N/A"
       ::= {acSysEthernetDeviceStatusEntry 1}



     acSysEthernetDeviceStatusVlanID OBJECT-TYPE
       SYNTAX Unsigned32 (1..4094)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Vlan Id.
AC INI-Param: N/A"
       ::= {acSysEthernetDeviceStatusEntry 2}



     acSysEthernetDeviceStatusUnderlyingInterface OBJECT-TYPE
       SYNTAX RowPointer
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Underlying Interface the device points to.
AC INI-Param: N/A"
       ::= {acSysEthernetDeviceStatusEntry 3}



     acSysEthernetDeviceStatusDeviceName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..16))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acSysEthernetDeviceStatusEntry 4}



     acSysNetworkWiFiStats OBJECT IDENTIFIER ::= {acSysNetwork 6}


     acSysNetworkWiFiStatsLinuxWatchdogTimeouts OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Linux Watchdog Timeouts.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 1}



     acSysNetworkWiFiStatsSWWatchdogTimeouts OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "S/w Watchdog Timeouts.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 2}



     acSysNetworkWiFiStatsHWFatalInterrupts OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Hardware Fatal Interrupts.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 3}



     acSysNetworkWiFiStatsBeaconMissInterrupts OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Beacon Miss Interrupts.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 4}



     acSysNetworkWiFiStatsRcvOverrunInterrupts OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Receive Overrun Interrupts.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 5}



     acSysNetworkWiFiStatsRcvEolInterrupts OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Receive EOL Interrupts.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 6}



     acSysNetworkWiFiStatsTxUnderrunInterrupts OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit underrun Interrupts.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 7}



     acSysNetworkWiFiStatsGlobalTxTimeoutInterrupts OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Global Transmit Timeout Interrupts.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 8}



     acSysNetworkWiFiStatsCarrierSenseTimeoutInterrupts OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Carrier Sense Timeout Interrupts.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 9}



     acSysNetworkWiFiStatsTxFramesTailDropped OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Frames Tail Dropped.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 10}



     acSysNetworkWiFiStatsTxFramesTailDroppedDueDeadLink OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Frames Tail Dropped Due to Dead Link.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 11}



     acSysNetworkWiFiStatsTxDropsWrongState OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Drops In Wrong State.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 12}



     acSysNetworkWiFiStatsTxFramesDiscardedDeviceGone OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Frames Discarded Because Device Gone.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 13}



     acSysNetworkWiFiStatsTxQueueStoppedNoTxBuffers OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Queue Stopped because No Tx Buffers.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 14}



     acSysNetworkWiFiStatsDataTxFailedNoTxBuffer OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed No Tx Buffer (Data).
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 15}



     acSysNetworkWiFiStatsMgtTxFailedNoTxBuffer OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed No Tx Buffer (Management).
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 16}



     acSysNetworkWiFiStatsBKTxFailedNoTxBuffer OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed No Tx Buffer (BK).
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 17}



     acSysNetworkWiFiStatsBETxFailedNoTxBuffer OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed No Tx Buffer (BE).
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 18}



     acSysNetworkWiFiStatsVITxFailedNoTxBuffer OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed No Tx Buffer (VI).
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 19}



     acSysNetworkWiFiStatsVOTxFailedNoTxBuffer OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed No Tx Buffer (VO).
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 20}



     acSysNetworkWiFiStatsTxFailedNoDescriptors OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed No Descriptors.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 21}



     acSysNetworkWiFiStatsTxFailedNoDescriptorsLegacyPackets OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed No Descriptors for legacy packets.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 22}



     acSysNetworkWiFiStatsTxFailedNoDescriptorsAggr OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed No Descriptors for aggregates.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 23}



     acSysNetworkWiFiStatsTxFailedBadSetupLegacyPackets OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because key setup failures for legacy packets.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 24}



     acSysNetworkWiFiStatsTxFailedBadSetupAggr OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because key setup failures for aggregates.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 25}



     acSysNetworkWiFiStatsTxFailedNoSKBSLegacyEncaps OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because no SKBS for legacy encapsulation.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 26}



     acSysNetworkWiFiStatsTxFailedNoSKBSAggrEncaps OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because no SKBS for aggregate  encapsulation.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 27}



     acSysNetworkWiFiStatsTxFailedNoNode OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because no node.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 28}



     acSysNetworkWiFiStatsTxFailedFIFOUnderrunAggr OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because FIFO underrun for aggregates.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 29}



     acSysNetworkWiFiStatsTxFailedFIFOUnderrunLegacyPackets OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because FIFO underrun for legacy packets.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 30}



     acSysNetworkWiFiStatsTxFailedXmitFiter OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because  xmit filtered.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 31}



     acSysNetworkWiFiStatsTxFailedTimerExp OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because  timer expired.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 32}



     acSysNetworkWiFiStatsTxFailedTxopExceededAggr OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because  txop exceeded for an aggregate.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 33}



     acSysNetworkWiFiStatsTxFailedDescriptorCfgErrAggr OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed because descriptor cfg error for aggregates.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 34}



     acSysNetworkWiFiStatsTxFailedDataUnderrunAggr OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed data underrun for an aggregates.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 35}



     acSysNetworkWiFiStatsTxFailedDelimiterUnderrunAggr OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed delimiter underrun for an aggregates.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 36}



     acSysNetworkWiFiStatsTxFailedInvalidBAState OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Transmit Failed invalid BA state from Hard Ware.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 37}



     acSysNetworkWiFiStatsRxFailedFIFOOverrun OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Receive Failed because FIFO overrun.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 38}



     acSysNetworkWiFiStatsRxDiscardedFrameTooBig OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Receive Discarded because frame is too large.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 39}



     acSysNetworkWiFiStatsRxFailedNoBuff OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Receive setup failed because no sk buff.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 40}



     acSysNetworkWiFiStatsRxFailedDecryption OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Receive failed because decryption.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 41}



     acSysNetworkWiFiStatsRxFailedMICFailure OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Receive failed because MIC failure.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 42}



     acSysNetworkWiFiStatsRxFailedDecryptBusyError OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Receive failed because decrypt busy errors.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 43}



     acSysNetworkWiFiStatsRxFailedPktsBadVer OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Receive failed because packets with bad version.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 44}



     acSysNetworkWiFiStatsNoBuffForBeacon OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "No buffers available for beacon.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 45}



     acSysNetworkWiFiStatsBeaconStuck OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Beacon Stuck.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 46}



     acSysNetworkWiFiStatsPeriodicCalibrationFail OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Periodic Calibration Failures.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 47}



     acSysNetworkWiFiStatsFastChannelChangeFail OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Fast Channel Change Failures.
AC INI-Param: N/A"
       ::= {acSysNetworkWiFiStats 48}



     acSysNetworkCell OBJECT IDENTIFIER ::= {acSysNetwork 7}


     acSysNetworkCellCurrentNetworkTypeDescription OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..128))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Representing the Cellular dongle current network type.
AC INI-Param: N/A"
       ::= {acSysNetworkCell 1}



     acSysNetworkCellSignalStrength OBJECT-TYPE
       SYNTAX Integer32 (-120..-30)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Cellular modems signal strength, given in dBm's.
AC INI-Param: N/A"
       ::= {acSysNetworkCell 2}



     acSysNetworkCellInterfaceWorkingMode OBJECT-TYPE
       SYNTAX INTEGER {
                  ppp(0)
,
                  dhcp(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Cellular interface working mode.
AC INI-Param: N/A"
       ::= {acSysNetworkCell 3}



     acSysNetworkCellWanIPAddress OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "IP Address of WAN as received by the Cellular network. IPv4
and IPv6 supported.
AC INI-Param: N/A"
       ::= {acSysNetworkCell 4}



     acSysTime OBJECT IDENTIFIER ::= {acSystemStatus 7}


     acSysTimeUp OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Time (in Seconds) that the board is alive.
AC INI-Param: N/A"
       ::= {acSysTime 1}



     acSysTimeLastConfig OBJECT-TYPE
       SYNTAX TimeTicks
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The value of sysUpTime at the time the system entered its current
configuration state.
AC INI-Param: N/A"
       ::= {acSysTime 2}



     acSysTimeAlarmLastChange OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..50))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Last time Active Alarms Table was changed in UTC time format.
AC INI-Param: N/A"
       ::= {acSysTime 3}



     acSysTimeSystemAvailabilityStartTime OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..64))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "System Availability Start Time.
AC INI-Param: N/A"
       ::= {acSysTime 4}



     acSysTimeSystemAvailability OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "System availability (in per cent mille, one one-thousandth of
a percent).
AC INI-Param: N/A"
       ::= {acSysTime 5}



     acSysVoicePrompt OBJECT IDENTIFIER ::= {acSystemStatus 8}


     acSysVoicePromptTotalMemorySize OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Get the total voice prompt memory size.
AC INI-Param: N/A"
       ::= {acSysVoicePrompt 1}



     acSysVoicePromptMaxFreeMemorySize OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Get the maximu voice prompt memory free size.
AC INI-Param: N/A"
       ::= {acSysVoicePrompt 2}



     acSysRepositoryAMS OBJECT IDENTIFIER ::= {acSystemStatus 9}


     acSysRepositoryAMSIsReadyForUpdate OBJECT-TYPE
       SYNTAX INTEGER {
                  false(0)
,
                  true(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Verify if the old repository is free or there are signals still
using it.
AC INI-Param: N/A"
       ::= {acSysRepositoryAMS 1}



     acSysHAStatus OBJECT IDENTIFIER ::= {acSystemStatus 10}


     acSysHAStatusReady OBJECT-TYPE
       SYNTAX INTEGER {
                  notApplicable(1)
,
                  yes(2)
,
                  no(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Defines whether the M3K system supports HA or not.
AC INI-Param: N/A"
       ::= {acSysHAStatus 1}



     acSysHAStatusNetworkWatchdogStatus OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..400))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acSysHAStatus 2}



     acSysLDAPStatus OBJECT IDENTIFIER ::= {acSystemStatus 11}


     acSysLDAPStatusServerMode OBJECT-TYPE
       SYNTAX INTEGER {
                  notApplicable(0)
,
                  connectionBroken(1)
,
                  connecting(2)
,
                  connected(3)

                  }
       MAX-ACCESS read-only
       STATUS obsolete
       DESCRIPTION
           "LDAP server status.
AC INI-Param: N/A"
       ::= {acSysLDAPStatus 1}



     acSysNqmStatus OBJECT IDENTIFIER ::= {acSystemStatus 12}


     -- ****************************************
     -- acSysNqmHistory table declaration
     -- ****************************************
     acSysNqmHistoryTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysNqmHistoryEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysNqmStatus 1}



     -- ****************************************
     -- acSysNqmHistory table entry
     -- ****************************************
     acSysNqmHistoryEntry OBJECT-TYPE
       SYNTAX AcSysNqmHistoryEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysNqmHistorySenderIndex,acSysNqmHistoryIndex}
       ::= {acSysNqmHistoryTable 1}



     -- ****************************************
     -- acSysNqmHistory TABLE
     -- ****************************************
     AcSysNqmHistoryEntry ::= SEQUENCE {
       acSysNqmHistorySenderIndex                      Unsigned32,
       acSysNqmHistoryIndex                            Unsigned32,
       acSysNqmHistoryProbeTime                        SnmpAdminString,
       acSysNqmHistoryIsValid                          SnmpAdminString,
       acSysNqmHistoryRoundTripTime                    Unsigned32,
       acSysNqmHistoryPacketLossTx                     Unsigned32,
       acSysNqmHistoryPacketLossRx                     Unsigned32,
       acSysNqmHistoryTotalPacketLoss                  Unsigned32,
       acSysNqmHistoryJitterTx                         Unsigned32,
       acSysNqmHistoryJitterRx                         Unsigned32,
       acSysNqmHistoryTotalJitter                      Unsigned32,
       acSysNqmHistoryCqMos                            Unsigned32,
       acSysNqmHistoryLqMos                            Unsigned32
     }



     acSysNqmHistorySenderIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..9)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index of Sender from acSysNqmSenderTable.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 1}



     acSysNqmHistoryIndex OBJECT-TYPE
       SYNTAX Unsigned32
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Internal index.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 2}



     acSysNqmHistoryProbeTime OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..32))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "NULL terminated.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 3}



     acSysNqmHistoryIsValid OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..16))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Null terminated Yes/No or textual reason.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 4}



     acSysNqmHistoryRoundTripTime OBJECT-TYPE
       SYNTAX Unsigned32 (0..99999)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "round trip time [msec].
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 5}



     acSysNqmHistoryPacketLossTx OBJECT-TYPE
       SYNTAX Unsigned32 (0..999999)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "outging packet loss.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 6}



     acSysNqmHistoryPacketLossRx OBJECT-TYPE
       SYNTAX Unsigned32 (0..999999)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "incoming packet loss.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 7}



     acSysNqmHistoryTotalPacketLoss OBJECT-TYPE
       SYNTAX Unsigned32 (0..9999999)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "sum of Rx and Tx packet loss.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 8}



     acSysNqmHistoryJitterTx OBJECT-TYPE
       SYNTAX Unsigned32 (0..999999)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "outgoing jitter.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 9}



     acSysNqmHistoryJitterRx OBJECT-TYPE
       SYNTAX Unsigned32 (0..999999)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "incoming jitter.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 10}



     acSysNqmHistoryTotalJitter OBJECT-TYPE
       SYNTAX Unsigned32 (0..9999999)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "round trip jitter.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 11}



     acSysNqmHistoryCqMos OBJECT-TYPE
       SYNTAX Unsigned32 (0..99999)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Conversation quality MOS.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 12}



     acSysNqmHistoryLqMos OBJECT-TYPE
       SYNTAX Unsigned32 (0..99999)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Listener  quality MOS.
AC INI-Param: N/A"
       ::= {acSysNqmHistoryEntry 13}



     acSysDataStatus OBJECT IDENTIFIER ::= {acSystemStatus 13}


     acSysDataStatusFirewallTCPConnections OBJECT-TYPE
       SYNTAX Unsigned32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The number of TCP firewall connections.
AC INI-Param: N/A"
       ::= {acSysDataStatus 1}



     acSysDataStatusFirewallUDPConnections OBJECT-TYPE
       SYNTAX Unsigned32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The number of UDP firewall connections.
AC INI-Param: N/A"
       ::= {acSysDataStatus 2}



     acSysDataStatusFirewallICMPConnections OBJECT-TYPE
       SYNTAX Unsigned32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The number of ICMP firewall connections.
AC INI-Param: N/A"
       ::= {acSysDataStatus 3}



     acSysDataStatusFirewallIGMPConnections OBJECT-TYPE
       SYNTAX Unsigned32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The number of IGMP firewall connections.
AC INI-Param: N/A"
       ::= {acSysDataStatus 4}



     acSysInventory OBJECT IDENTIFIER ::= {acSystemStatus 14}


     acSysInventoryChassis OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..128))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Parameter is relevant for Hosted products family only.
AC INI-Param: N/A"
       ::= {acSysInventory 1}



     acSysInventoryCPU OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..128))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Parameter is relevant for Hosted products family only.
AC INI-Param: N/A"
       ::= {acSysInventory 2}



     acSysInventoryMemory OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..128))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Parameter is relevant for Hosted products family only.
AC INI-Param: N/A"
       ::= {acSysInventory 3}



     acSysInventoryNetworkCards OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..1024))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Parameter is relevant for Hosted products family only. Parameter
contains multiple lines.
AC INI-Param: N/A"
       ::= {acSysInventory 4}



     acSysInventoryVirtualEnvironment OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..128))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Parameter is relevant for Hosted products family only.
AC INI-Param: N/A"
       ::= {acSysInventory 5}



     acSystemAction OBJECT IDENTIFIER ::= {acSystem 3}


     acSysAction OBJECT IDENTIFIER ::= {acSystemAction 1}


     acSysActionSet OBJECT IDENTIFIER ::= {acSysAction 1}


     acSysActionSetReset OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "remote Reset.  To remote reset the board, set the value of this
object to 1.
Note: Before Reset, The current boardConfiguration parameters
will be burned to the board.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 1}



     acSysActionSetResetControl OBJECT-TYPE
       SYNTAX INTEGER {
                  resetFromFlashAfterBurn(1)
,
                   resetFromFlashNoBurn(2)
,
                   resetFromBootP(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the remote reset action.
1 - burn staged load image, if any, and config to flash, perform
a reset, and load from flash
2 - perform a reset, and load from flash (staged load image,
if any, and config is not burned to flash)
3 - perform a reset, and load from bootp/tftp (staged load
image, if any, and config burn is not needed)
* - an error is returned for any other value
Note: The staged load image is an image of a cmp file that
was previously loaded to a area in RAM via an HTTP upload.
Access: Instant.
AC INI-Param: RemoteResetControl"
       ::= {acSysActionSet 2}



     acSysActionSetDefaults OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "To set the board to default values, set the value of this object
to 1.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 3}



     acSysActionSetSaveConfig OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "To save all current configuration in the board onto the flash,
set the value of this object to 1.
NOTE: Do NOT save the configuration while voice is running
- this will cause a delay.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 4}



     acSysActionSetAutoUpdate OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "To update the system configuration according to the provisioned
IniFileUrl, set the value of this object to 1.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 5}



     acSysActionSetGetTimeFromNTPServer OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Initiates an immediate NTP time fetch.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 6}



     acSysActionSetSwUpgrade OBJECT-TYPE
       SYNTAX INTEGER {
                  hitLessUpGrade(1)
,
                  systemResetUpGrade(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the type of SW upgrade in M3K HA system:
Hitless upgrade only or system reset upgrade if hitless is
not supported.
This parameter can be set by ini file and snmp.
Access: Instant.
AC INI-Param: M3KHASwUpgradeMode"
       ::= {acSysActionSet 7}



     acSysActionSetOnLineChangesApply OBJECT-TYPE
       SYNTAX INTEGER {
                  defaultValue(0)
,
                  applyChanges(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Applies the board on line changed params.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 8}



     acSysActionSetIPSecTLSUpgrade OBJECT-TYPE
       SYNTAX INTEGER {
                  defaultValue(0)
,
                  upDateChanges(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "To update the IPSec TLS configuration according to the provisioned
TLS fils URL  set the value of this object to 1.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 9}



     acSysActionSetGWAppTLSUpgrade OBJECT-TYPE
       SYNTAX INTEGER {
                  defaultValue(0)
,
                  upDateChanges(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "To update the GWApp TLS configuration according to the provisioned
TLS fils URL  set the value of this object to 1.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 10}



     acSysActionSetConvertNetworkIFsConfiguration OBJECT-TYPE
       SYNTAX INTEGER {
                  defaultValue(0)
,
                  convertAction(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "SET to 1 will convert network configuration to advance multiple
network Interfaces mode.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 11}



     acSysActionSetActionId OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This field is for management use and is aimed to distinguish
different managers managing a single device.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 12}



     acSysActionSetAutoUpdateActionResult OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..200))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Indicates the autoupdates operation status in the form of a
string: 'acSysActionId ; <status> ; <reson>'.
The status field can be: 'success'\'failure'\'inProgress'.
The infromation is valid only when downloading one file at
a time.
Note - a second way of following the success of the file downloading
is to see the files name being updated in the acSysFile
subtree.
AC INI-Param: N/A"
       ::= {acSysActionSet 13}



     acSysActionSetApplyINImethod OBJECT-TYPE
       SYNTAX INTEGER {
                  applyAfterReset(0)
,
                  applyImmediate(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "INI parsing method. 

0 = Apply After Reset
1 = Apply Immediate

When downloading a new INI to the gateway this parameter determine
if a parsing will be done immediately or after a reboot.

Note that the default is immediately parsing.
Access: Instant.
AC INI-Param: ApplyINImethod"
       ::= {acSysActionSet 14}



     acSysActionSetLicensePoolUpdate OBJECT-TYPE
       SYNTAX INTEGER {
                  unset(0)
,
                  newPool(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Updates License Pool from License Server.
Access: Instant.
AC INI-Param: LicenseServerEnable"
       ::= {acSysActionSet 15}



     acSysActionSetAupdNetworkSource OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..100))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the Network of AUPD.
Access: Instant.
AC INI-Param: AUPDNetworkSource"
       ::= {acSysActionSet 16}



     acSysActionSetLicensePoolHitless OBJECT-TYPE
       SYNTAX INTEGER {
                  unset(0)
,
                  hitlessApply(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Administrator request to apply or reset in order to use new
License pool.
Access: Instant.
AC INI-Param: LicensePoolEMSAction"
       ::= {acSysActionSet 17}



     acSysActionSetLicensePoolRefreshRequest OBJECT-TYPE
       SYNTAX INTEGER {
                  noRequest(0)
,
                  request(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "License Pool Refresh Request.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysActionSet 18}



     acSysActionAdmin OBJECT IDENTIFIER ::= {acSysAction 2}


     acSysActionAdminState OBJECT-TYPE
       SYNTAX INTEGER {
                  locked(0)
,
                   shuttingDown(1)
,
                   unlocked(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the gateway's operational state.
0 - locked: Shutdown the GW In the time frame set by acgwAdminStateLockControl.
1 - shuttingDown: (read only) Graceful Shutdown is being carried
out.
2 - unlocked: GW is in service.
Access: Online.
AC INI-Param: N/A"
       ::= {acSysActionAdmin 1}



     acSysActionAdminStateLockTimeout OBJECT-TYPE
       SYNTAX Integer32 (-1..32768)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the time remaining (in seconds) for the shutdown to
complete. 
 0  = immediate shutdown
-1  = waits until all calls drop (infinite)
>0 = the number of seconds to wait.
Access: Offline.
AC INI-Param: N/A"
       ::= {acSysActionAdmin 2}



     acSysUpload OBJECT IDENTIFIER ::= {acSysAction 3}


     acSysUploadActionType OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  upload(1)
,
                  remove(2)
,
                  actionDone(10)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Action to be carried out. Setting this field triggers the action.
File upload supported for iniFile(1), v5PortFile(16) and DataConfigurationFile(17)
only access is instant.
File removal supported for all other then iniFile(1),  casFile(7),
v5PortFile(16) and DataConfigurationFile(17), (v5PortFile
removal is done via acV5PortActionType) access is offline.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysUpload 1}



     acSysUploadFileType OBJECT-TYPE
       SYNTAX INTEGER {
                  iniFile(1)
,
                  cptFile(2)
,
                  vpFile(3)
,
                  prerecordedTonesFile(4)
,
                  fxsCoeffFile(5)
,
                  fxoCoeffFile(6)
,
                  casFile(7)
,
                  xmlFile(8)
,
                  externalCoderFile(9)
,
                  userInfoFile(10)
,
                  dialPlanFile(11)
,
                  tlsPKeyFile(12)
,
                  tlsCertFile(13)
,
                  tlsRootFile(14)
,
                  videoFontFile(15)
,
                  v5PortFile(16)
,
                  dataConfigurationFile(17)
,
                  amdSensitivityFile(18)
,
                  debugFile(19)
,
                  cliScriptFile(20)
,
                  cliScriptLogFile(21)
,
                  configurationPackageFile(22)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "The file type to be uploaded.
Note - for file types with more then one instance (like CAS
files) use the acSysActionFileInstance to specify which instance
you want to upload.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysUpload 2}



     acSysUploadFileNumber OBJECT-TYPE
       SYNTAX Integer32 (-1..7)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "File number for file types that have more then one file instance,
such  as CAS, VideoFont etc'.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysUpload 3}



     acSysUploadFileURI OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..512))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "URI indicating file location to be downloaded to.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysUpload 4}



     acSysUploadActionID OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This field is for management use and is aimed to distinguish
different managers managing a single device.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysUpload 5}



     acSysUploadActionResult OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..40))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Action result. Includes action status (success, failure or inProgress),
action ID.
AC INI-Param: N/A"
       ::= {acSysUpload 6}



     acSysMcUpgrade OBJECT IDENTIFIER ::= {acSysAction 4}


     acSysMcUpgradeActionType OBJECT-TYPE
       SYNTAX INTEGER {
                  none(-1)
,
                  immediateUpgrade(0)
,
                  hitlessUpgrade(1)
,
                  stopHitlessUpgrade(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Action to be carried out. Default(-1). 
 Immediate-upgrade (0) - the cluster will be restarted. 
 Hitless-upgrade(1) - Cluster upgrade will be done with no
service  disturbance. 
 StopHitlessUpgrade(2) - If the Hitless Upgrade is in process,
the upgrade will be stop. 
.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysMcUpgrade 1}



     acSysMcUpgradeMcType OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The type of the Media Component: HW based component - 'MC'.
Software-only component - 'vMC'.
AC INI-Param: N/A"
       ::= {acSysMcUpgrade 2}



     acSysMcUpgradeGracefulTimeout OBJECT-TYPE
       SYNTAX Unsigned32 (0..2000000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Cluster Graceful Timeout (sec).
Access: Instant.
AC INI-Param: MtcGracefulTimeout"
       ::= {acSysMcUpgrade 3}



     acSysMcUpgradeActionID OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This field is for management use and is aimed to distinguish
different managers managing a single device.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysMcUpgrade 4}



     acSysMcUpgradeActionResult OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..40))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Action results in the following format  ID: Success/Failed/In
Progress: <full description>.
AC INI-Param: N/A"
       ::= {acSysMcUpgrade 5}



     acSysConfigurationPackageChecksum OBJECT IDENTIFIER ::= {acSysAction 5}


     acSysConfigurationPackageChecksumActionType OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)
,
                  calculate(1)
,
                  actionDone(10)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Action to be carried out. 
Default(0) - no calculation in process. 
Calculate(1) - In process of calculating current checksum.

ActionDone(10) - Action done.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysConfigurationPackageChecksum 1}



     acSysConfigurationPackageChecksumActionID OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This field is for management use and is aimed to distinguish
different managers managing a single device.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysConfigurationPackageChecksum 2}



     acSysConfigurationPackageChecksumActionResult OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..40))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Action results in the following format - ID: Success/Failed/In
Progress.
AC INI-Param: N/A"
       ::= {acSysConfigurationPackageChecksum 3}



     acSysConfigurationPackageChecksumValue OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..64))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Value of checksum.
AC INI-Param: N/A"
       ::= {acSysConfigurationPackageChecksum 4}



     acSystemChassis OBJECT IDENTIFIER ::= {acSystem 4}


     acSystemChassisDryContactsOutStatus OBJECT-TYPE
       SYNTAX BITS {
                  noAlarm(0)
,
                  criticalAlarm(1)
,
                  majorAlarm(2)
,
                  minorAlarm(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Indicates current state of the alarm dry contacts  out signals
(3 signals).  This is a bit-map of possible conditions.
AC INI-Param: N/A"
       ::= {acSystemChassis 1}



     acSystemChassisDryContactsInStatus OBJECT-TYPE
       SYNTAX BITS {
                  noAlarm(0)
,
                  alarm1(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Indicates current state of the alarm dry contacts - in signals
(1 signals). The role of each input signal should be according
to the customer's requirements. This is a bit-map of possible
conditions.
AC INI-Param: N/A"
       ::= {acSystemChassis 2}



     acSystemChassisLastChanged OBJECT-TYPE
       SYNTAX Unsigned32 (0..4294967295)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The value of sysUpTime at the time a row is modified in any
of the acSystemChassis subtree's objects.
AC INI-Param: N/A"
       ::= {acSystemChassis 3}



     -- ****************************************
     -- acSysModule table declaration
     -- ****************************************
     acSysModuleTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysModuleEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           " "
       ::= {acSystemChassis 21}



     -- ****************************************
     -- acSysModule table entry
     -- ****************************************
     acSysModuleEntry OBJECT-TYPE
       SYNTAX AcSysModuleEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysModuleIndex}
       ::= {acSysModuleTable 1}



     -- ****************************************
     -- acSysModule TABLE
     -- ****************************************
     AcSysModuleEntry ::= SEQUENCE {
       acSysModuleIndex                                Unsigned32,
       acSysModuleGeographicalPosition                 Unsigned32,
       acSysModuleType                                 INTEGER,
       acSysModulePresence                             INTEGER,
       acSysModuleLicenseKeyList                       SnmpAdminString,
       acSysModuleSerialNumber                         Integer32,
       acSysModuleSWVersion                            SnmpAdminString,
       acSysModuleOperationalState                     INTEGER,
       acSysModuleHAStatus                             INTEGER,
       acSysModuleLEDs                                 OCTET STRING,
       acSysModuleTemperature                          Integer32,
       acSysModuleActions                              INTEGER,
       acSysModuleFRUaction                            INTEGER,
       acSysModuleFRUstatus                            INTEGER,
       acSysModuleNumOfPorts                           Unsigned32,
       acSysModuleFirstPortNum                         Unsigned32,
       acSysModuleSerialNumberString                   SnmpAdminString
     }



     acSysModuleIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "The Module number in the system.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 1}



     acSysModuleGeographicalPosition OBJECT-TYPE
       SYNTAX Unsigned32 (1..12)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The slot number in the chassis. 1 being the bottom slot and
so on.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 2}



     acSysModuleType OBJECT-TYPE
       SYNTAX INTEGER {
                  acUnknown(0)
,
                  acTrunkPack-08(1)
,
                  acMediaPack-108(2)
,
                  acMediaPack-124(3)
,
                  acTrunkPack-1600(20)
,
                  acTPM1100(22)
,
                  acTrunkPack-260-IpMedia(23)
,
                  acTrunkPack-1610(24)
,
                  acMediaPack-104(25)
,
                  acMediaPack-102(26)
,
                  acTrunkPack-1610-SB(29)
,
                  acTrunkPack-1610-IpMedia(30)
,
                  acTrunkPack-MEDIANT2000(31)
,
                  acTrunkPack-STRETTO2000(32)
,
                  acTrunkPack-IPMServer2000(33)
,
                  acTrunkPack-2810(34)
,
                  acTrunkPack-260-UN-IpMedia (35)
,
                  acTrunkPack-260-IpMedia-30Ch(36)
,
                  acTrunkPack-260-IpMedia-60Ch(37)
,
                  acTrunkPack-260-IpMedia-120Ch(38)
,
                  acTrunkPack-260RT-IpMedia-30Ch(39)
,
                  acTrunkPack-260RT-IpMedia-60Ch(40)
,
                  acTrunkPack-260RT-IpMedia-120Ch(41)
,
                  acTrunkPack-260(42)
,
                  acTrunkPack-260-UN (43)
,
                  acTPM1100-PCM(44)
,
                  acTrunkPack-6310(45)
,
                  acTPM6300(46)
,
                  acMediant1000(47)
,
                  acIPMedia3000(48)
,
                  acMediant3000(49)
,
                  acStretto3000(50)
,
                  acTrunkPack-6310-IpMedia(51)
,
                  acTrunkPack-6310-SB(52)
,
                  acATP-1610(53)
,
                  acATP-260(54)
,
                  acATP-260-UN(55)
,
                  acMediaPack-118(56)
,
                  acMediaPack114(57)
,
                  acMediaPack112(58)
,
                  acTrunkPack-6310-T3(59)
,
                  acMediant3000-T3(60)
,
                  acIPmedia3000-T3(61)
,
                  acTrunkPack-6310-T3-IpMedia(62)
,
                  acTrunkPack-8410(63)
,
                  acTrunkPack-8410-IpMedia(64)
,
                  acMediant-800-MSBR(69)
,
                  acMediant-4000(70)
,
                  acMediant-1000-ESBC(71)
,
                  acMediaPack-500-ESBC(72)
,
                  acMediantSW(73)
,
                  acMediant-800B-MSBG(74)
,
                  acMediant-800B-ESBC(75)
,
                  acMediant-500-MSBG(76)
,
                  acMediant-500-ESBC(77)
,
                  acMediant-2600(78)
,
                  acMediant-VE-SBC(79)
,
                  acMediant-VE-H-SBC(80)
,
                  acMediant-SE-SBC(81)
,
                  acMediant-SE-H-SBC(82)
,
                  acMediant-9000-SBC(83)
,
                  acMediant-500L-MSBR(84)
,
                  acMediant-500L-ESBC(85)
,
                  sA1(250)
,
                  sA2(251)
,
                  sA3(252)
,
                  acMediant1000CPUmodule(253)
,
                  acMediant1000IFDigitalModule(254)
,
                  acMediant1000IFAnalogModule(255)
,
                  acMediant1000IFBRIModule(256)
,
                  acMediant1000IPMediaModule(257)
,
                  acMediant600CPUmodule(258)
,
                  acMediant600IFDigitalModule(259)
,
                  acMediant600IFAnalogModule(260)
,
                  acMediant600IFBRIModule(261)
,
                  acMediant600IPMediaModule(262)
,
                  acMediant800CPUmodule(265)
,
                  acMediant800IFDigitalModule(266)
,
                  acMediant800IFAnalogModule(267)
,
                  acMediant800IFBRIModule(268)
,
                  acMediant800IFWANModule(269)
,
                  acMediant800IFWiFiModule(270)
,
                  acMediant800IPMediaModule(271)
,
                  acMediant800EthernetModule(272)
,
                  acMediant800IFT1WANModule(273)
,
                  acMediant800IFSHDSLModule(274)
,
                  acMediant800IFADSLModule(275)
,
                  acMediant1000IFWANModule(276)
,
                  acMediant1000IFT1WANModule(277)
,
                  acMediant1000IFSHDSLModule(278)
,
                  acMediant1000IFADSLModule(279)
,
                  acMediant4000CPUmodule(280)
,
                  acMediant1000EthernetModule(281)
,
                  acSWESBCModule(282)
,
                  acMediant500CPUmodule(283)
,
                  acMediant500IFDigitalModule(284)
,
                  acMediant500IFAnalogModule(285)
,
                  acMediant500IFBRIModule(286)
,
                  acMediant500IFWANModule(287)
,
                  acMediant500IFWiFiModule(288)
,
                  acMediant500IPMediaModule(289)
,
                  acMediant500EthernetModule(290)
,
                  acMediant500IFT1WANModule(291)
,
                  acMediant500IFSHDSLModule(292)
,
                  acMediant500IFADSLModule(293)
,
                  acMediant500IFGESFPModule(294)
,
                  acMediant4000MPModule(295)
,
                  acMediant-800B-MSBR(296)
,
                  acMediant800BCPUmodule(297)
,
                  acMediant800BIFDigitalModule(298)
,
                  acMediant800BIFAnalogModule(299)
,
                  acMediant800BIFBRIModule(300)
,
                  acMediant800BIFWANModule(301)
,
                  acMediant800BIFWiFiModule(302)
,
                  acMediant800BIPMediaModule(303)
,
                  acMediant800BEthernetModule(304)
,
                  acMediant800BIFT1WANModule(305)
,
                  acMediant800BIFSHDSLModule(306)
,
                  acMediant800BIFADSLModule(307)
,
                  acMediant2600CPUmodule(308)
,
                  acMediant2600MPModule(309)
,
                  acMediaPack1288CPUmodule(310)
,
                  acMediaPack1288FXSAnalogModule(311)
,
                  acMediant3100CPUModule(312)
,
                  acMediant3100IFDigitalModule(313)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The module's type.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 3}



     acSysModulePresence OBJECT-TYPE
       SYNTAX INTEGER {
                  present(1)
,
                  missing(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Is the module present or missing.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 4}



     acSysModuleLicenseKeyList OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..1400))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "List of active features as enabled by the license key. SA modules
return NULL.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 5}



     acSysModuleSerialNumber OBJECT-TYPE
       SYNTAX Integer32 (-1..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The module's serial number.
For 6310 the serial number is the decimal form of the last
5 characters in the MAC Address.
 SA modules return 0.
 When the modules in the table are unavailable for audit (no
HA) (-1) is returned. 
 For Hosted only 32 lower bits are represented.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 6}



     acSysModuleSWVersion OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The version of the SW being run in the module placed .
 SA Modules return NULL.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 7}



     acSysModuleOperationalState OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(1)
,
                  enable(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The operational state of the module. Determined internally by
the system.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 8}



     acSysModuleHAStatus OBJECT-TYPE
       SYNTAX INTEGER {
                  acitveNonHA(1)
,
                  active(2)
,
                  redundant(3)
,
                  standAlone(4)
,
                  redundantNonHA(5)
,
                  notApplicable(6)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Modules status with in the system. Designed to define the HA
state.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 9}



     acSysModuleLEDs OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..50))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Bit Field for the LEDs on the front of the module.
LSB in each nibble (half Byte) is 0 - constant, 1 - blinking.
3 MSB are the color -
 0 - none
 1- Green
 2 - Red 
 3 - Yellow
 4 - Orange
 5 - Blue
 7 - Gray (unknown).
AC INI-Param: N/A"
       ::= {acSysModuleEntry 10}



     acSysModuleTemperature OBJECT-TYPE
       SYNTAX Integer32 (-1..100)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Temperature of the board in degrees Celsius. SA Modules return
0.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 11}



     acSysModuleActions OBJECT-TYPE
       SYNTAX INTEGER {
                  reset(1)
,
                  switchOver(2)
,
                  actionDone(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Actions to be performed by the module.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 12}



     acSysModuleFRUaction OBJECT-TYPE
       SYNTAX INTEGER {
                  fruActionDone(1)
,
                  fruOutOfServiceAction(2)
,
                  fruBackToServiceAction(3)
,
                  fruNotApplicable(4)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Field Replace Unit actions
Relevant to IF-Module only.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 13}



     acSysModuleFRUstatus OBJECT-TYPE
       SYNTAX INTEGER {
                  moduleNotExist(1)
,
                  moduleExistOk(2)
,
                  moduleOutOfService(3)
,
                  moduleBackToServiceStart(4)
,
                  moduleMismatch(5)
,
                  moduleFaulty(6)
,
                  notApplicable(7)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Field Replace Unit module's status.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 14}



     acSysModuleNumOfPorts OBJECT-TYPE
       SYNTAX Unsigned32 (1..4)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The number of  physical interfaces in a module, analog or digital.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 15}



     acSysModuleFirstPortNum OBJECT-TYPE
       SYNTAX Unsigned32 (0..19)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The logical number as seen in the general trunk/analog-channel
table of the first port in the module in question.
Since analog and digital ports can be operational at once,
analog and digital ports may have same logical number.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 16}



     acSysModuleSerialNumberString OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The module's serial number represented as string.
AC INI-Param: N/A"
       ::= {acSysModuleEntry 17}



     -- ****************************************
     -- acSysFanTray table declaration
     -- ****************************************
     acSysFanTrayTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysFanTrayEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSystemChassis 22}



     -- ****************************************
     -- acSysFanTray table entry
     -- ****************************************
     acSysFanTrayEntry OBJECT-TYPE
       SYNTAX AcSysFanTrayEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysFanTrayIndex}
       ::= {acSysFanTrayTable 1}



     -- ****************************************
     -- acSysFanTray TABLE
     -- ****************************************
     AcSysFanTrayEntry ::= SEQUENCE {
       acSysFanTrayIndex                               Unsigned32,
       acSysFanTrayGeographicalPosition                Unsigned32,
       acSysFanTrayExistence                           INTEGER,
       acSysFanTrayType                                SnmpAdminString,
       acSysFanTrayLEDs                                OCTET STRING,
       acSysFanTraySeverity                            INTEGER,
       acSysFanTrayFansConfiguredSpeed                 OCTET STRING,
       acSysFanTrayFansCurrentSpeed                    OCTET STRING,
       acSysFanTrayFansStatus                          OCTET STRING
     }



     acSysFanTrayIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Fan-Tray's index in the system.
AC INI-Param: N/A"
       ::= {acSysFanTrayEntry 1}



     acSysFanTrayGeographicalPosition OBJECT-TYPE
       SYNTAX Unsigned32 (1..1)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The slot number in the chassis.
AC INI-Param: N/A"
       ::= {acSysFanTrayEntry 2}



     acSysFanTrayExistence OBJECT-TYPE
       SYNTAX INTEGER {
                  present(1)
,
                  missing(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Is the Fan-Tray present or missing.
AC INI-Param: N/A"
       ::= {acSysFanTrayEntry 3}



     acSysFanTrayType OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..50))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The type of the Fan-Tray .
AC INI-Param: N/A"
       ::= {acSysFanTrayEntry 4}



     acSysFanTrayLEDs OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "This object built as a bit-field which represents the Fan-Tray's
LEDs status.
The first four bites represent the System's LED status and
the last four bites represent the Shelf-LEDs status.
AC INI-Param: N/A"
       ::= {acSysFanTrayEntry 5}



     acSysFanTraySeverity OBJECT-TYPE
       SYNTAX INTEGER {
                  cleared(0)
,
                  indeterminate(1)
,
                  warning(2)
,
                  minor(3)
,
                  major(4)
,
                  critical(5)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The Severity of the whole fan tray according to the current
active alarm in the alarm table: Critical, Major or cleared.
AC INI-Param: N/A"
       ::= {acSysFanTrayEntry 6}



     acSysFanTrayFansConfiguredSpeed OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..8))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The fan's configured speed in Tach units (RPM/120). Each Byte
represents a fan.
AC INI-Param: N/A"
       ::= {acSysFanTrayEntry 7}



     acSysFanTrayFansCurrentSpeed OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..8))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The fan's mesured speed in Tach units (RPM/120). Each Byte represents
a fan.
AC INI-Param: N/A"
       ::= {acSysFanTrayEntry 8}



     acSysFanTrayFansStatus OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..1))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "A bit field which display the working status of each fan in
the Fan-Tray.
0 - Working
1 - Faulty.
AC INI-Param: N/A"
       ::= {acSysFanTrayEntry 9}



     -- ****************************************
     -- acSysPowerSupply table declaration
     -- ****************************************
     acSysPowerSupplyTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysPowerSupplyEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSystemChassis 23}



     -- ****************************************
     -- acSysPowerSupply table entry
     -- ****************************************
     acSysPowerSupplyEntry OBJECT-TYPE
       SYNTAX AcSysPowerSupplyEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysPowerSupplyIndex}
       ::= {acSysPowerSupplyTable 1}



     -- ****************************************
     -- acSysPowerSupply TABLE
     -- ****************************************
     AcSysPowerSupplyEntry ::= SEQUENCE {
       acSysPowerSupplyIndex                           Unsigned32,
       acSysPowerSupplyGeographicalPosition            Unsigned32,
       acSysPowerSupplyExistence                       INTEGER,
       acSysPowerSupplyHwversion                       SnmpAdminString,
       acSysPowerSupplyLEDs                            OCTET STRING,
       acSysPowerSupplySeverity                        INTEGER
     }



     acSysPowerSupplyIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Power-Supply's index in the system.
AC INI-Param: N/A"
       ::= {acSysPowerSupplyEntry 1}



     acSysPowerSupplyGeographicalPosition OBJECT-TYPE
       SYNTAX Unsigned32 (1..2)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The slot number in the chassis.
AC INI-Param: N/A"
       ::= {acSysPowerSupplyEntry 2}



     acSysPowerSupplyExistence OBJECT-TYPE
       SYNTAX INTEGER {
                  present(1)
,
                  missing(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Is the Power-Supply present or missing.
AC INI-Param: N/A"
       ::= {acSysPowerSupplyEntry 3}



     acSysPowerSupplyHwversion OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "PSs HW version.
AC INI-Param: N/A"
       ::= {acSysPowerSupplyEntry 4}



     acSysPowerSupplyLEDs OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "A bit-field representation of the Power-Supply LEDs' status.
The first four bites represent the Power-Supply LED's status
and the last four bites represent the Fault LED's status.
AC INI-Param: N/A"
       ::= {acSysPowerSupplyEntry 5}



     acSysPowerSupplySeverity OBJECT-TYPE
       SYNTAX INTEGER {
                  cleared(1)
,
                  indeterminate(2)
,
                  warning(3)
,
                  minor(4)
,
                  major(5)
,
                  critical(6)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The Severity of the power-supply according to the current active
alarm in the alarm table.
AC INI-Param: N/A"
       ::= {acSysPowerSupplyEntry 6}



     -- ****************************************
     -- acSysPEM table declaration
     -- ****************************************
     acSysPEMTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysPEMEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSystemChassis 24}



     -- ****************************************
     -- acSysPEM table entry
     -- ****************************************
     acSysPEMEntry OBJECT-TYPE
       SYNTAX AcSysPEMEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysPEMIndex}
       ::= {acSysPEMTable 1}



     -- ****************************************
     -- acSysPEM TABLE
     -- ****************************************
     AcSysPEMEntry ::= SEQUENCE {
       acSysPEMIndex                                   Unsigned32,
       acSysPEMGeographicalPosition                    Unsigned32,
       acSysPEMExistence                               INTEGER,
       acSysPEMType                                    SnmpAdminString,
       acSysPEMElectricWireConnection                  INTEGER
     }



     acSysPEMIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "PEM-Module's index in the system.
AC INI-Param: N/A"
       ::= {acSysPEMEntry 1}



     acSysPEMGeographicalPosition OBJECT-TYPE
       SYNTAX Unsigned32 (1..2)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The slot number in the chassis.
AC INI-Param: N/A"
       ::= {acSysPEMEntry 2}



     acSysPEMExistence OBJECT-TYPE
       SYNTAX INTEGER {
                  present(1)
,
                  missing(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Is the PEM-Module present or missing.
AC INI-Param: N/A"
       ::= {acSysPEMEntry 3}



     acSysPEMType OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "PEMs Type.
AC INI-Param: N/A"
       ::= {acSysPEMEntry 4}



     acSysPEMElectricWireConnection OBJECT-TYPE
       SYNTAX INTEGER {
                  connected(1)
,
                  disconnected(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Present the status of the electricity connector located on the
PEM card.
AC INI-Param: N/A"
       ::= {acSysPEMEntry 5}



     acSysSATModule OBJECT IDENTIFIER ::= {acSystemChassis 25}


     -- ****************************************
     -- acSysSAT table declaration
     -- ****************************************
     acSysSATTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysSATEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysSATModule 21}



     -- ****************************************
     -- acSysSAT table entry
     -- ****************************************
     acSysSATEntry OBJECT-TYPE
       SYNTAX AcSysSATEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysSATSatIndex}
       ::= {acSysSATTable 1}



     -- ****************************************
     -- acSysSAT TABLE
     -- ****************************************
     AcSysSATEntry ::= SEQUENCE {
       acSysSATSatIndex                                Unsigned32,
       acSysSATGeographicalPosition                    Unsigned32,
       acSysSATType                                    SnmpAdminString,
       acSysSATInitInformation                         INTEGER,
       acSysSATTimingUnitExistence                     INTEGER,
       acSysSATTimingRefSelection                      INTEGER
     }



     acSysSATSatIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "SAT-Module's index in the system.
AC INI-Param: N/A"
       ::= {acSysSATEntry 1}



     acSysSATGeographicalPosition OBJECT-TYPE
       SYNTAX Unsigned32 (2..4)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The slot number in the chassis.
AC INI-Param: N/A"
       ::= {acSysSATEntry 2}



     acSysSATType OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "SATs Type.
AC INI-Param: N/A"
       ::= {acSysSATEntry 3}



     acSysSATInitInformation OBJECT-TYPE
       SYNTAX INTEGER {
                  detected(0)
,
                  reConfig(1)
,
                  reConfigTry2(2)
,
                  reConfigTry3(3)
,
                  notInitialized(4)
,
                  initIsMissing(5)
,
                  initWasReset(6)
,
                  initFail(7)
,
                  initInProgress(8)
,
                  initUpdateREFTable(9)
,
                  remoteKeepAlive(10)
,
                  initComplete(11)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Sat's Init Information.
AC INI-Param: N/A"
       ::= {acSysSATEntry 4}



     acSysSATTimingUnitExistence OBJECT-TYPE
       SYNTAX INTEGER {
                  exist(1)
,
                  notExist(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Is the Timig Unit present or missing.
AC INI-Param: N/A"
       ::= {acSysSATEntry 5}



     acSysSATTimingRefSelection OBJECT-TYPE
       SYNTAX INTEGER {
                  bITSNOREF(0)
,
                  rEFFromBITSA(1)
,
                  rEFFromBITSB(2)
,
                  bITSNOREF1(3)
,
                  rEFFromLineClock1(4)
,
                  rEFFromLineClock2(5)
,
                  rEFFromLineClock3(6)
,
                  rEFFromLineClock7(7)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "SAT's Timing Reference Selection.
AC INI-Param: N/A"
       ::= {acSysSATEntry 6}



     -- ****************************************
     -- acSysSATFramers table declaration
     -- ****************************************
     acSysSATFramersTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysSATFramersEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysSATModule 22}



     -- ****************************************
     -- acSysSATFramers table entry
     -- ****************************************
     acSysSATFramersEntry OBJECT-TYPE
       SYNTAX AcSysSATFramersEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysSATFramersSatIndex,acSysSATFramersFramerIndex}
       ::= {acSysSATFramersTable 1}



     -- ****************************************
     -- acSysSATFramers TABLE
     -- ****************************************
     AcSysSATFramersEntry ::= SEQUENCE {
       acSysSATFramersSatIndex                         Unsigned32,
       acSysSATFramersFramerIndex                      Unsigned32,
       acSysSATFramersFramerInterfaceStatus            INTEGER,
       acSysSATFramersFramerLoopBackRef                INTEGER,
       acSysSATFramersFramerInterfaceType              INTEGER,
       acSysSATFramersFramerTransmitControl            INTEGER,
       acSysSATFramersRxStatus                         INTEGER,
       acSysSATFramersIsUsedAsPLLClock                 INTEGER
     }



     acSysSATFramersSatIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "SAT-Module's index in the system.
AC INI-Param: N/A"
       ::= {acSysSATFramersEntry 1}



     acSysSATFramersFramerIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Framer's Index.
AC INI-Param: N/A"
       ::= {acSysSATFramersEntry 2}



     acSysSATFramersFramerInterfaceStatus OBJECT-TYPE
       SYNTAX INTEGER {
                  framerInitialized(0)
,
                  framerNotInitialized(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Framer Interface Status.
AC INI-Param: N/A"
       ::= {acSysSATFramersEntry 3}



     acSysSATFramersFramerLoopBackRef OBJECT-TYPE
       SYNTAX INTEGER {
                  loopdisable(0)
,
                  loopenable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Frame rLoop Back Reference.
AC INI-Param: N/A"
       ::= {acSysSATFramersEntry 4}



     acSysSATFramersFramerInterfaceType OBJECT-TYPE
       SYNTAX INTEGER {
                  e1CRC4(0)
,
                  e1CAS(1)
,
                  e1FAS(2)
,
                  t1D4(3)
,
                  t1ESF(4)
,
                  t12(5)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Framer Interface Type.
AC INI-Param: N/A"
       ::= {acSysSATFramersEntry 5}



     acSysSATFramersFramerTransmitControl OBJECT-TYPE
       SYNTAX INTEGER {
                  systemClock(0)
,
                  aIS(1)
,
                  disableTransmit(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Framer Transmit Control.
AC INI-Param: N/A"
       ::= {acSysSATFramersEntry 6}



     acSysSATFramersRxStatus OBJECT-TYPE
       SYNTAX INTEGER {
                  alarmClear(0)
,
                  lOFAlarm(1)
,
                  lOSAlarm(2)
,
                  aISAlarm(3)
,
                  aISInit(4)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Provides the alarm status of the clock interface.
AC INI-Param: N/A"
       ::= {acSysSATFramersEntry 7}



     acSysSATFramersIsUsedAsPLLClock OBJECT-TYPE
       SYNTAX INTEGER {
                  notUsed(0)
,
                  used(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Is Used As PLL Clock indication.
AC INI-Param: N/A"
       ::= {acSysSATFramersEntry 8}



     acSysTimingModule OBJECT IDENTIFIER ::= {acSystemChassis 26}


     -- ****************************************
     -- acSysPLLStatus table declaration
     -- ****************************************
     acSysPLLStatusTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysPLLStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acSysTimingModule 21}



     -- ****************************************
     -- acSysPLLStatus table entry
     -- ****************************************
     acSysPLLStatusEntry OBJECT-TYPE
       SYNTAX AcSysPLLStatusEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysPLLStatusIndex}
       ::= {acSysPLLStatusTable 1}



     -- ****************************************
     -- acSysPLLStatus TABLE
     -- ****************************************
     AcSysPLLStatusEntry ::= SEQUENCE {
       acSysPLLStatusIndex                             Unsigned32,
       acSysPLLStatusOperatingMode                     INTEGER
     }



     acSysPLLStatusIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Table's Index.
AC INI-Param: N/A"
       ::= {acSysPLLStatusEntry 1}



     acSysPLLStatusOperatingMode OBJECT-TYPE
       SYNTAX INTEGER {
                  freeRun(0)
,
                  lockToRef1(1)
,
                  lockToRef2(2)
,
                  lockToLocal(3)
,
                  holdOver(4)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "PLL's Current Operating Mode.
AC INI-Param: N/A"
       ::= {acSysPLLStatusEntry 2}



     acSystemChassisHA OBJECT IDENTIFIER ::= {acSystemChassis 27}


     acSystemChassisHADevice1Name OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..128))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Define the unit identification name of the first unit of HA
system. 
Relevant to M4K and SW-SBC.
Access: Instant.
AC INI-Param: HAUnitIdName"
       ::= {acSystemChassisHA 1}



     acSystemChassisHADevice2Name OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..128))
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Define the unit identification name of the second unit of HA
system.
Relevant to M4K and SW-SBC.
Access: Instant.
AC INI-Param: HAUnitIdName"
       ::= {acSystemChassisHA 2}



     acSystemChassisHAActiveDevice OBJECT-TYPE
       SYNTAX INTEGER {
                  notApplicable(0)
,
                  device1(1)
,
                  device2(2)
,
                  standAlone(3)
,
                  haReady(4)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Specifies the active device. 
Relevant to M4K and SW-SBC.
AC INI-Param: N/A"
       ::= {acSystemChassisHA 3}



     -- ****************************************
     -- acSysRedundantModule table declaration
     -- ****************************************
     acSysRedundantModuleTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysRedundantModuleEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           " Relevant only to M4K."
       ::= {acSystemChassisHA 21}



     -- ****************************************
     -- acSysRedundantModule table entry
     -- ****************************************
     acSysRedundantModuleEntry OBJECT-TYPE
       SYNTAX AcSysRedundantModuleEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysRedundantModuleIndex}
       ::= {acSysRedundantModuleTable 1}



     -- ****************************************
     -- acSysRedundantModule TABLE
     -- ****************************************
     AcSysRedundantModuleEntry ::= SEQUENCE {
       acSysRedundantModuleIndex                       Unsigned32,
       acSysRedundantModuleGeographicalPosition        Unsigned32,
       acSysRedundantModuleType                        INTEGER,
       acSysRedundantModulePresence                    INTEGER,
       acSysRedundantModuleLicenseKeyList              SnmpAdminString,
       acSysRedundantModuleSerialNumber                Integer32,
       acSysRedundantModuleSWVersion                   SnmpAdminString,
       acSysRedundantModuleOperationalState            INTEGER,
       acSysRedundantModuleHAStatus                    INTEGER,
       acSysRedundantModuleLEDs                        OCTET STRING,
       acSysRedundantModuleTemperature                 Integer32,
       acSysRedundantModuleActions                     INTEGER,
       acSysRedundantModuleFRUaction                   INTEGER,
       acSysRedundantModuleFRUstatus                   INTEGER,
       acSysRedundantModuleNumOfPorts                  Unsigned32,
       acSysRedundantModuleFirstPortNum                Unsigned32,
       acSysRedundantModuleSerialNumberString          SnmpAdminString
     }



     acSysRedundantModuleIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "The Module number in the system.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 1}



     acSysRedundantModuleGeographicalPosition OBJECT-TYPE
       SYNTAX Unsigned32 (1..12)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The CPU slot number of the redundant board.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 2}



     acSysRedundantModuleType OBJECT-TYPE
       SYNTAX INTEGER {
                  acUnknown(0)
,
                  acMediantSW(73)
,
                  acMediant-VE-SBC(79)
,
                  acMediant-VE-H-SBC(80)
,
                  acMediant-SE-SBC(81)
,
                  acMediant-SE-H-SBC(82)
,
                  acMediant-9000-SBC(83)
,
                  acMediant-500L-MSBR(84)
,
                  acMediant-500L-ESBC(85)
,
                  acMediant800CPUmodule(265)
,
                  acMediant800IFDigitalModule(266)
,
                  acMediant800IFAnalogModule(267)
,
                  acMediant800IFBRIModule(268)
,
                  acMediant800EthernetModule(272)
,
                  acMediant4000CPUmodule(280)
,
                  acMediant500CPUmodule(283)
,
                  acMediant500IFDigitalModule(284)
,
                  acMediant500IFAnalogModule(285)
,
                  acMediant500IFBRIModule(286)
,
                  acMediant500EthernetModule(290)
,
                  acMediant4000MPModule(295)
,
                  acMediant2600CPUmodule(308)
,
                  acMediant2600MPModule(309)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The module's type.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 3}



     acSysRedundantModulePresence OBJECT-TYPE
       SYNTAX INTEGER {
                  present(1)
,
                  missing(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Is the module present or missing.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 4}



     acSysRedundantModuleLicenseKeyList OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..1400))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "List of active features as enabled by the license key. SA modules
return NULL.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 5}



     acSysRedundantModuleSerialNumber OBJECT-TYPE
       SYNTAX Integer32 (-1..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The module's serial number.
For 6310 the serial number is the decimal form of the last
5 characters in the MAC Address.
 SA modules return 0.
 When the modules in the table are unavailable for audit (no
HA) (-1) is returned. 
 For Hosted only 32 lower bits are represented.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 6}



     acSysRedundantModuleSWVersion OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The version of the SW being run in the module placed .
 SA Modules return NULL.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 7}



     acSysRedundantModuleOperationalState OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(1)
,
                  enable(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The operational state of the module. Determined internally by
the system.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 8}



     acSysRedundantModuleHAStatus OBJECT-TYPE
       SYNTAX INTEGER {
                  acitveNonHA(1)
,
                  active(2)
,
                  redundant(3)
,
                  standAlone(4)
,
                  redundantNonHA(5)
,
                  notApplicable(6)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Modules status with in the system. Designed to define the HA
state.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 9}



     acSysRedundantModuleLEDs OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..50))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Bit Field for the LEDs on the front of the module.
LSB in each nibble (half Byte) is 0 - constant, 1 - blinking.
3 MSB are the color -
 0 - none
 1- Green
 2 - Red 
 3 - Yellow
 4 - Orange
 5 - Blue
 7 - Gray (unknown).
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 10}



     acSysRedundantModuleTemperature OBJECT-TYPE
       SYNTAX Integer32 (-1..100)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Temperature of the board in degrees Celsius. SA Modules return
0.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 11}



     acSysRedundantModuleActions OBJECT-TYPE
       SYNTAX INTEGER {
                  reset(1)
,
                  actionDone(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Actions to be performed by the module.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 12}



     acSysRedundantModuleFRUaction OBJECT-TYPE
       SYNTAX INTEGER {
                  fruActionDone(1)
,
                  fruOutOfServiceAction(2)
,
                  fruBackToServiceAction(3)
,
                  fruNotApplicable(4)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Field Replace Unit actions
Relevant to IF-Module only.
Access: Instant.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 13}



     acSysRedundantModuleFRUstatus OBJECT-TYPE
       SYNTAX INTEGER {
                  moduleNotExist(1)
,
                  moduleExistOk(2)
,
                  moduleOutOfService(3)
,
                  moduleBackToServiceStart(4)
,
                  moduleMismatch(5)
,
                  moduleFaulty(6)
,
                  notApplicable(7)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Field Replace Unit module's status.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 14}



     acSysRedundantModuleNumOfPorts OBJECT-TYPE
       SYNTAX Unsigned32 (1..4)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The number of  physical interfaces in a module, analog or digital.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 15}



     acSysRedundantModuleFirstPortNum OBJECT-TYPE
       SYNTAX Unsigned32 (0..19)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The logical number as seen in the general trunk/analog-channel
table of the first port in the module in question.
Since analog and digital ports can be operational at once,
analog and digital ports may have same logical number.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 16}



     acSysRedundantModuleSerialNumberString OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..255))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The module's serial number represented as string.
AC INI-Param: N/A"
       ::= {acSysRedundantModuleEntry 17}



     -- ****************************************
     -- acSysRedundantFanTray table declaration
     -- ****************************************
     acSysRedundantFanTrayTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysRedundantFanTrayEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           " Relevant only to M4K."
       ::= {acSystemChassisHA 22}



     -- ****************************************
     -- acSysRedundantFanTray table entry
     -- ****************************************
     acSysRedundantFanTrayEntry OBJECT-TYPE
       SYNTAX AcSysRedundantFanTrayEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysRedundantFanTrayIndex}
       ::= {acSysRedundantFanTrayTable 1}



     -- ****************************************
     -- acSysRedundantFanTray TABLE
     -- ****************************************
     AcSysRedundantFanTrayEntry ::= SEQUENCE {
       acSysRedundantFanTrayIndex                      Unsigned32,
       acSysRedundantFanTrayGeographicalPosition       Unsigned32,
       acSysRedundantFanTrayExistence                  INTEGER,
       acSysRedundantFanTrayType                       SnmpAdminString,
       acSysRedundantFanTrayLEDs                       OCTET STRING,
       acSysRedundantFanTraySeverity                   INTEGER,
       acSysRedundantFanTrayFansConfiguredSpeed        OCTET STRING,
       acSysRedundantFanTrayFansCurrentSpeed           OCTET STRING,
       acSysRedundantFanTrayFansStatus                 OCTET STRING
     }



     acSysRedundantFanTrayIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Fan-Tray's index in the system.
AC INI-Param: N/A"
       ::= {acSysRedundantFanTrayEntry 1}



     acSysRedundantFanTrayGeographicalPosition OBJECT-TYPE
       SYNTAX Unsigned32 (1..1)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The slot number in the chassis.
AC INI-Param: N/A"
       ::= {acSysRedundantFanTrayEntry 2}



     acSysRedundantFanTrayExistence OBJECT-TYPE
       SYNTAX INTEGER {
                  present(1)
,
                  missing(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Is the Fan-Tray present or missing.
AC INI-Param: N/A"
       ::= {acSysRedundantFanTrayEntry 3}



     acSysRedundantFanTrayType OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..50))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The type of the Fan-Tray .
AC INI-Param: N/A"
       ::= {acSysRedundantFanTrayEntry 4}



     acSysRedundantFanTrayLEDs OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "This object built as a bit-field which represents the Fan-Tray's
LEDs status.
The first four bites represent the System's LED status and
the last four bites represent the Shelf-LEDs status.
AC INI-Param: N/A"
       ::= {acSysRedundantFanTrayEntry 5}



     acSysRedundantFanTraySeverity OBJECT-TYPE
       SYNTAX INTEGER {
                  cleared(0)
,
                  indeterminate(1)
,
                  warning(2)
,
                  minor(3)
,
                  major(4)
,
                  critical(5)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The Severity of the whole fan tray according to the current
active alarm in the alarm table: Critical, Major or cleared.
AC INI-Param: N/A"
       ::= {acSysRedundantFanTrayEntry 6}



     acSysRedundantFanTrayFansConfiguredSpeed OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..8))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The fan's configured speed in Tach units (RPM/120). Each Byte
represents a fan.
AC INI-Param: N/A"
       ::= {acSysRedundantFanTrayEntry 7}



     acSysRedundantFanTrayFansCurrentSpeed OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..8))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The fan's mesured speed in Tach units (RPM/120). Each Byte represents
a fan.
AC INI-Param: N/A"
       ::= {acSysRedundantFanTrayEntry 8}



     acSysRedundantFanTrayFansStatus OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..1))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "A bit field which display the working status of each fan in
the Fan-Tray.
0 - Working
1 - Faulty.
AC INI-Param: N/A"
       ::= {acSysRedundantFanTrayEntry 9}



     -- ****************************************
     -- acSysRedundantPowerSupply table declaration
     -- ****************************************
     acSysRedundantPowerSupplyTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcSysRedundantPowerSupplyEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           " Relevant only to M4K."
       ::= {acSystemChassisHA 23}



     -- ****************************************
     -- acSysRedundantPowerSupply table entry
     -- ****************************************
     acSysRedundantPowerSupplyEntry OBJECT-TYPE
       SYNTAX AcSysRedundantPowerSupplyEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acSysRedundantPowerSupplyIndex}
       ::= {acSysRedundantPowerSupplyTable 1}



     -- ****************************************
     -- acSysRedundantPowerSupply TABLE
     -- ****************************************
     AcSysRedundantPowerSupplyEntry ::= SEQUENCE {
       acSysRedundantPowerSupplyIndex                  Unsigned32,
       acSysRedundantPowerSupplyGeographicalPosition   Unsigned32,
       acSysRedundantPowerSupplyExistence              INTEGER,
       acSysRedundantPowerSupplyHwversion              SnmpAdminString,
       acSysRedundantPowerSupplyLEDs                   OCTET STRING,
       acSysRedundantPowerSupplySeverity               INTEGER
     }



     acSysRedundantPowerSupplyIndex OBJECT-TYPE
       SYNTAX Unsigned32 (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Power-Supply's index in the system.
AC INI-Param: N/A"
       ::= {acSysRedundantPowerSupplyEntry 1}



     acSysRedundantPowerSupplyGeographicalPosition OBJECT-TYPE
       SYNTAX Unsigned32 (1..2)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The slot number in the chassis.
AC INI-Param: N/A"
       ::= {acSysRedundantPowerSupplyEntry 2}



     acSysRedundantPowerSupplyExistence OBJECT-TYPE
       SYNTAX INTEGER {
                  present(1)
,
                  missing(2)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Is the Power-Supply present or missing.
AC INI-Param: N/A"
       ::= {acSysRedundantPowerSupplyEntry 3}



     acSysRedundantPowerSupplyHwversion OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "PSs HW version.
AC INI-Param: N/A"
       ::= {acSysRedundantPowerSupplyEntry 4}



     acSysRedundantPowerSupplyLEDs OBJECT-TYPE
       SYNTAX OCTET STRING (SIZE (0..20))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "A bit-field representation of the Power-Supply LEDs' status.
The first four bites represent the Power-Supply LED's status
and the last four bites represent the Fault LED's status.
AC INI-Param: N/A"
       ::= {acSysRedundantPowerSupplyEntry 5}



     acSysRedundantPowerSupplySeverity OBJECT-TYPE
       SYNTAX INTEGER {
                  cleared(1)
,
                  indeterminate(2)
,
                  warning(3)
,
                  minor(4)
,
                  major(5)
,
                  critical(6)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "The Severity of the power-supply according to the current active
alarm in the alarm table.
AC INI-Param: N/A"
       ::= {acSysRedundantPowerSupplyEntry 6}





END
