<?xml version="1.0"encoding="US-ASCII"?>encoding="UTF-8"?> <!DOCTYPE rfc [ <!ENTITY nbsp " "> <!ENTITY zwsp "​"> <!ENTITY nbhy "‑"> <!ENTITY wj "⁠"> ]> <rfc xmlns:xi="http://www.w3.org/2001/XInclude" submissionType="IETF" category="info" consensus="true" docName="draft-zern-webp-15" number="9649" ipr="trust200902" obsoletes="" updates="" xml:lang="en" tocInclude="true" tocDepth="4" symRefs="true" sortRefs="true" version="3"> <front><title>WebP<title abbrev="WebP Image Format">WebP Image Format</title> <seriesInfoname="Internet-Draft" value="draft-zern-webp-15" /> <seriesInfo status="informational" name="" value="draft-zern-webp-15" />name="RFC" value="9649"/> <author fullname="James Zern" initials="J." surname="Zern"> <organization>Google LLC</organization> <address> <postal> <street>1600 Amphitheatre Parkway</street> <city>Mountain View</city> <region>CA</region> <code>94043</code> <country>United States of America</country> </postal> <phone>+1 650 253-0000</phone> <email>jzern@google.com</email> </address> </author> <author fullname="Pascal Massimino" initials="P." surname="Massimino"> <organization>Google LLC</organization> <address> <email>pascal.massimino@gmail.com</email> </address> </author> <author fullname="Jyrki Alakuijala" initials="J." surname="Alakuijala"> <organization>Google LLC</organization> <address> <email>jyrki.alakuijala@gmail.com</email> </address> </author> <date year="2024"month="April"/>month="September"/> <area>art</area> <keyword>VP8</keyword> <keyword>WebP</keyword> <abstract> <t>This document defines the WebP image format and registers a media type supporting its use.</t> </abstract> </front> <middle> <section numbered="true" toc="default"> <name>Introduction</name> <t>WebP is an image file format based on the <xref target="RIFF-spec">Resource Interchange File Format (RIFF)</xref> (<xref target="webp-container"/>) that supports lossless and lossy compression as well as alpha (transparency) and animation. It covers use cases similar to <xref target="JPEG-spec">JPEG</xref>, <xref target="RFC2083">PNG</xref>, and the <xref target="GIF-spec">Graphics Interchange Format (GIF)</xref>.</t> <t>WebP consists of two compression algorithms used to reduce the size of image pixel data, including alpha (transparency) information. Lossy compression is achieved using VP8 intra-frame encoding <xref target="RFC6386"/>. The <xref target="webp-lossless">lossless algorithm</xref> stores and restores the pixel values exactly, including the color values for fully transparent pixels. A universal algorithm for sequential data compression <xref target="LZ77"/>, <xref target="Huffman">prefix coding</xref>, and a color cache are used for compression of the bulk data.</t> </section> <section anchor="webp-container" numbered="true" toc="default"> <name>WebP Container Specification</name> <t>Note that this section is based on the documentation in the <xref target="webp-riff-src">libwebp source repository</xref>.</t> <section numbered="true" toc="default"> <name>Introduction (from "WebP Container Specification")</name> <t>WebP is an image format that uses either (i) the VP8 intra-frame encoding <xref target="RFC6386"/> to compress image data in a lossy way or (ii) the <xreftarget="webp-lossless">WebPtarget="webp-lossless"> WebP lossless encoding</xref>. These encoding schemes should make it more efficient than older formats, such as JPEG, GIF, and PNG. It is optimized for fast image transfer over the network (for example, for websites). The WebP format has feature parity (color profile, metadata, animation, etc.) with other formats as well. This section describes the structure of a WebP file.</t> <t>The WebP container (that is, the RIFF container for WebP) allows feature support over and above the basic use case of WebP (that is, a file containing a single image encoded as a VP8 key frame). The WebP container provides additional support for the following:</t> <ul spacing="normal"> <li>Lossless Compression: An image can be losslessly compressed, using the WebP lossless format.</li> <li>Metadata: An image may have metadata stored in Exchangeable Image File Format <xref target="Exif"/> or Extensible Metadata Platform <xref target="XMP"/> format.</li> <li>Transparency: An image may have transparency, that is, an alpha channel.</li> <li>Color Profile: An image may have an embedded <xref target="ICC">ICC profile (ICCP)</xref>.</li> <li>Animation: An image may have multiple frames with pauses between them, making it an animation.</li> </ul> </section> <section anchor="terminology-amp-basics" numbered="true" toc="default"> <name>Terminology & Basics</name> <t> The key words "<bcp14>MUST</bcp14>", "<bcp14>MUST NOT</bcp14>", "<bcp14>REQUIRED</bcp14>", "<bcp14>SHALL</bcp14>", "<bcp14>SHALL NOT</bcp14>", "<bcp14>SHOULD</bcp14>", "<bcp14>SHOULD NOT</bcp14>", "<bcp14>RECOMMENDED</bcp14>", "<bcp14>NOT RECOMMENDED</bcp14>", "<bcp14>MAY</bcp14>", and "<bcp14>OPTIONAL</bcp14>" in this document are to be interpreted as described in BCP 14 <xref target="RFC2119"/> <xref target="RFC8174"/> when, and only when, they appear in all capitals, as shown here. </t> <t>A WebP file contains either a still image (that is, an encoded matrix of pixels) or an <xref target="animation">animation</xref>. Optionally, it can also contain transparency information, a color profile, and metadata. We refer to the matrix of pixels as the <em>canvas</em> of the image.</t> <t>Bit numbering in chunk diagrams starts at <tt>0</tt> for the most significant bit ('MSB 0'), as described in <xref target="RFC1166"/>.</t> <t>Below are additional terms used throughout this section:</t> <dl newline="true" spacing="normal" indent="4"> <dt>Reader/Writer</dt> <dd>Code that reads WebP files is referred to as a <em>reader</em>, while code that writes them is referred to as a <em>writer</em>.</dd> <dt>uint16</dt> <dd>A 16-bit, little-endian, unsigned integer.</dd> <dt>uint24</dt> <dd>A 24-bit, little-endian, unsigned integer.</dd> <dt>uint32</dt> <dd>A 32-bit, little-endian, unsigned integer.</dd> <dt>FourCC</dt> <dd>A four-character code (FourCC) is a uint32 created by concatenating four ASCII characters in little-endian order. This means 'aaaa' (0x61616161) and 'AAAA' (0x41414141) are treated as different FourCCs.</dd> <dt>1-based</dt> <dd>An unsigned integer field storing values offset by -1, for example, such a field would store value <em>25</em> as <em>24</em>.</dd> <dt>ChunkHeader('ABCD')</dt> <dd>Used to describe the <em>FourCC</em> and <em>Chunk Size</em> header of individual chunks, where 'ABCD' is the FourCC for the chunk. This element's size is 8 bytes.</dd> </dl> </section> <section anchor="riff-file-format" numbered="true" toc="default"> <name>RIFF File Format</name> <t>The WebP file format is based on the <xref target="RIFF-spec">RIFF</xref> document format.</t> <t>The basic element of a RIFF file is a <em>chunk</em>. It consists of:</t> <figure> <name>'RIFF' Chunk Structure</name> <artwork name="" type="ascii-art" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Chunk FourCC | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Chunk Size | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : Chunk Payload : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>Chunk FourCC: 32 bits</dt><dd>ASCII<dd>The ASCII four-character code used for chunk identification.</dd> <dt>Chunk Size: 32 bits (<em>uint32</em>)</dt> <dd>The size of the chunk in bytes, not including this field, the chunk identifier, or padding.</dd> <dt>Chunk Payload: <em>Chunk Size</em> bytes</dt> <dd>The data payload. If <em>Chunk Size</em> is odd, a single padding byte -- which <bcp14>MUST</bcp14> be <tt>0</tt> to conform with <xref target="RIFF-spec">RIFF</xref> -- is added.</dd> </dl> <aside><t>Note: RIFF has a convention that all uppercase chunk FourCCs are standard chunks that apply to any RIFF file format, while FourCCs specific to a file format are all lowercase. WebP does not follow this convention.</t></aside> </section> <section numbered="true" toc="default"> <name>WebP File Header</name> <figure> <name>WebP File Header Chunk</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 'R' | 'I' | 'F' | 'F' | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | File Size | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 'W' | 'E' | 'B' | 'P' | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>'RIFF': 32 bits</dt> <dd>The ASCII characters 'R', 'I', 'F', 'F'.</dd> <dt>File Size: 32 bits (<em>uint32</em>)</dt> <dd>The size of the file in bytes, starting at offset 8. The maximum value of this field is 2<sup>32</sup> minus 10 bytes, and thus the size of the whole file is at most 4 GiB minus 2 bytes.</dd> <dt>'WEBP': 32 bits</dt> <dd>The ASCII characters 'W', 'E', 'B', 'P'.</dd> </dl> <t>A WebP file <bcp14>MUST</bcp14> begin with a RIFF header with the FourCC 'WEBP'. The file size in the header is the total size of the chunks that follow plus <tt>4</tt> bytes for the 'WEBP' FourCC. The file <bcp14>SHOULD NOT</bcp14> contain any data after the data specified by <em>File Size</em>. Readers <bcp14>MAY</bcp14> parse such files, ignoring the trailing data. As the size of any chunk is even, the size given by the RIFF header is also even. The contents of individual chunks are described in the following sections.</t> </section> <section anchor="simple-file-format-lossy" numbered="true" toc="default"> <name>Simple File Format (Lossy)</name> <t>This layout <bcp14>SHOULD</bcp14> be used if the image requires lossy encoding and does not require transparency or other advanced features provided by the extended format. Files with this layout are smaller and supported by older software.</t> <t> Simple WebP (lossy) file format: </t> <!--[rfced] To avoid redundancy, may we remove the introductory text from Figures 3-9, 13, and 14 since that text is the same as the titles of the figures? For example, may we remove "'VP8 ' Chunk:" above the bit ruler in the following figure? Original: 'VP8 ' Chunk: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ChunkHeader('VP8 ') | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : VP8 data : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 4: 'VP8 ' Chunk --> <figure> <name>Simple WebP (Lossy) File Format</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | WebP file header (12 bytes) | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : 'VP8 ' Chunk : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <t> 'VP8 ' Chunk: </t> <figure> <name>'VP8 ' Chunk</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ChunkHeader('VP8 ') | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : VP8 data : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>VP8 data: <em>Chunk Size</em> bytes</dt> <dd>VP8 bitstream data.</dd> </dl> <t>Note that the fourth character in the 'VP8 ' FourCC is an ASCII space (0x20).</t> <t>The VP8 bitstream format specification is described in <xref target="RFC6386"/>. Note that the VP8 frame header contains the VP8 frame width and height. That is assumed to be the width and height of the canvas.</t> <t>The VP8 specification describes how to decode the image into Y'CbCr format. To convert to RGB, <xreftarget="rec601">Recommendationtarget="rec601">ITU-R Recommendation 601</xref> <bcp14>SHOULD</bcp14> be used. Applications <bcp14>MAY</bcp14> use another conversion method, but visual results may differ among decoders.</t> </section> <section anchor="simple-file-format-lossless" numbered="true" toc="default"> <name>Simple File Format (Lossless)</name> <!-- [rfced] Please note that some text denoted with "Note:" and "Rationale:" is in the <aside> element and some text is not. For consistency, may we add the <aside> element to all instances of "Note:" and "Rationale:"? It is defined as "a container for content that is semantically less important or tangential to the content that surrounds it" (https://authors.ietf.org/en/rfcxml-vocabulary#aside). --> <t>Note: Older readers may not support files using the lossless format.</t> <t>This layout <bcp14>SHOULD</bcp14> be used if the image requires lossless encoding (with an optional transparency channel) and does not require advanced features provided by the extended format.</t> <t> Simple WebP (lossless) file format: </t> <figure> <name>Simple WebP (Lossless) File Format</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | WebP file header (12 bytes) | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : 'VP8L' Chunk : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <t> 'VP8L' Chunk: </t> <figure> <name>'VP8L' Chunk</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ChunkHeader('VP8L') | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : VP8L data : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>VP8L data: <em>Chunk Size</em> bytes</dt> <dd>VP8L bitstream data.</dd> </dl> <t>The specification of the VP8L bitstream can be found in <xref target="webp-lossless"/>. Note that the VP8L header contains the VP8L image width and height. That is assumed to be the width and height of the canvas.</t> </section> <section anchor="ext-file-form" numbered="true" toc="default"> <name>Extended File Format</name> <t>Note: Older readers may not support files using the extended format.</t> <t>An extended format file consistsof:</t>of the following:</t> <ul spacing="normal"><li>A<li>a 'VP8X' Chunk with information about features used in thefile.</li> <li>Anfile</li> <li>an optional 'ICCP' Chunk with a colorprofile.</li> <li>Anprofile</li> <li>an optional 'ANIM' Chunk with animation controldata.</li> <li>Image data.</li> <li>Andata</li> <li>image data</li> <li>an optional 'EXIF' Chunk with Exifmetadata.</li> <li>Anmetadata</li> <li>an optional 'XMP ' Chunk with XMPmetadata.</li> <li>Anmetadata</li> <li>an optional list of <xref target="unknown-chunks">unknownchunks</xref>.</li>chunks</xref></li> </ul> <t>For a <em>still image</em>, the <em>image data</em> consists of a single frame, which is made upof:</t>of the following:</t> <ul spacing="normal"><li>An<li>an optional <xref target="alpha">alphasubchunk</xref>.</li> <li>Asubchunk</xref></li> <li>a <xref target="bitstream-vp8vp8l">bitstreamsubchunk</xref>.</li>subchunk</xref></li> </ul> <t>For an <em>animated image</em>, the <em>image data</em> consists of multiple frames. More details about frames can be found in <xref target="animation"/>.</t> <t>All chunks necessary for reconstruction and color correction, thatisis, 'VP8X', 'ICCP', 'ANIM', 'ANMF', 'ALPH', 'VP8'', and 'VP8L', <bcp14>MUST</bcp14> appear in the order described earlier. Readers <bcp14>SHOULD</bcp14> fail when chunks necessary for reconstruction and color correction are out of order.</t> <t><xref target="metadata">Metadata</xref> and <xreftarget="unknown-chunks">unknown</xref> chunkstarget="unknown-chunks">unknown chunks</xref> MAY appear out of order.</t> <aside><t>Rationale: The chunks necessary for reconstruction should appear first in the file to allow a reader to begin decoding an image before receiving all of the data. An application may benefit from varying the order of metadata and custom chunks to suit the implementation.</t></aside> <t> Extended WebP file header: </t> <figure anchor="extended_header"> <name>Extended WebP File Header</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | WebP file header (12 bytes) | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ChunkHeader('VP8X') | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |Rsv|I|L|E|X|A|R| Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Canvas Width Minus One | ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... Canvas Height Minus One | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>Reserved (Rsv): 2 bits</dt> <dd><bcp14>MUST</bcp14> be <tt>0</tt>. Readers <bcp14>MUST</bcp14> ignore this field.</dd> <dt>ICC profile (I): 1 bit</dt> <dd>Set if the file contains an 'ICCP' Chunk.</dd> <dt>Alpha (L): 1 bit</dt> <dd>Set if any of the frames of the image contain transparency information ("alpha").</dd> <dt>Exif metadata (E): 1 bit</dt> <dd>Set if the file contains Exif metadata.</dd> <dt>XMP metadata (X): 1 bit</dt> <dd>Set if the file contains XMP metadata.</dd> <dt>Animation (A): 1 bit</dt> <dd>Set if this is an animated image. Data in 'ANIM' and 'ANMF' Chunks should be used to control the animation.</dd> <dt>Reserved (R): 1 bit</dt> <dd><bcp14>MUST</bcp14> be <tt>0</tt>. Readers <bcp14>MUST</bcp14> ignore this field.</dd> <dt>Reserved: 24 bits</dt> <dd><bcp14>MUST</bcp14> be <tt>0</tt>. Readers <bcp14>MUST</bcp14> ignore this field.</dd> <dt>Canvas Width Minus One: 24 bits</dt> <dd><em>1-based</em> width of the canvas in pixels. The actual canvas width is <tt>1 + Canvas Width Minus One</tt>.</dd> <dt>Canvas Height Minus One: 24 bits</dt> <dd><em>1-based</em> height of the canvas in pixels. The actual canvas height is <tt>1 + Canvas Height Minus One</tt>.</dd> </dl> <t>The product of <em>Canvas Width</em> and <em>Canvas Height</em> <bcp14>MUST</bcp14> be at most <tt>2<sup>32</sup> - 1</tt>.</t> <t>Future specifications may add more fields. Unknown fields <bcp14>MUST</bcp14> be ignored.</t> <section numbered="true" toc="default"> <name>Chunks</name> <section anchor="animation" numbered="true" toc="default"> <name>Animation</name> <t>An animation is controlled by 'ANIM' and 'ANMF' Chunks.</t> <t anchor="anim_chunk">'ANIM' Chunk:</t> <t>For an animated image, this chunk contains the <em>global parameters</em> of the animation.</t> <figure> <name>'ANIM' Chunk</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ChunkHeader('ANIM') | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Background Color | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Loop Count | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>Background Color: 32 bits (<em>uint32</em>)</dt> <dd> <t>The default background color of the canvas in [Blue, Green, Red, Alpha] byte order. This color <bcp14>MAY</bcp14> be used to fill the unused space on the canvas around the frames, as well as the transparent pixels of the first frame. The background color is also used when the Disposal method is <tt>1</tt>.</t><t>Note:</t><t>Notes:</t> <ul spacing="normal"> <li>The background color <bcp14>MAY</bcp14> contain a nonopaque alpha value, even if the <em>Alpha</em> flag in the <xref target="extended_header">'VP8X' Chunk</xref> is unset.</li> <li>Viewer applications <bcp14>SHOULD</bcp14> treat the background color value as a hint and are not required to use it.</li> <li>The canvas is cleared at the start of each loop. The background color <bcp14>MAY</bcp14> be used to achieve this.</li> </ul> </dd> <dt>Loop Count: 16 bits (<em>uint16</em>)</dt> <dd>The number of times to loop the animation. If it is <tt>0</tt>, this means infinitely.</dd> </dl> <t>This chunk <bcp14>MUST</bcp14> appear if the <em>Animation</em> flag in the 'VP8X' Chunk is set. If the <em>Animation</em> flag is not set and this chunk is present, it <bcp14>MUST</bcp14> be ignored.</t> <t>'ANMF' Chunk:</t> <t>For animated images, this chunk contains information about a <em>single</em> frame. If the<em>Animation flag</em><em>Animation</em> flag is not set, then this chunk <bcp14>SHOULD NOT</bcp14> be present.</t> <figure> <name>'ANMF' Chunk</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ChunkHeader('ANMF') | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Frame X | ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... Frame Y | Frame Width Minus One ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... | Frame Height Minus One | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Frame Duration | Reserved |B|D| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : Frame Data : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>Frame X: 24 bits (<em>uint24</em>)</dt> <dd>The X coordinate of the upper left corner of the frame is <tt>Frame X * 2</tt>.</dd> <dt>Frame Y: 24 bits (<em>uint24</em>)</dt> <dd>The Y coordinate of the upper left corner of the frame is <tt>Frame Y * 2</tt>.</dd> <dt>Frame Width Minus One: 24 bits (<em>uint24</em>)</dt> <dd>The <em>1-based</em> width of the frame. The frame width is <tt>1 + Frame Width Minus One</tt>.</dd> <dt>Frame Height Minus One: 24 bits (<em>uint24</em>)</dt> <dd>The <em>1-based</em> height of the frame. The frame height is <tt>1 + Frame Height Minus One</tt>.</dd> <dt>Frame Duration: 24 bits (<em>uint24</em>)</dt> <dd>The time to wait before displaying the next frame, in 1-millisecond units. Note that the interpretation of the Frame Duration of 0 (and often <= 10) is defined by the implementation. Many tools and browsers assign a minimum duration similar to GIF.</dd> <dt>Reserved: 6 bits</dt> <dd><bcp14>MUST</bcp14> be <tt>0</tt>. Readers <bcp14>MUST</bcp14> ignore this field.</dd> <dt>Blending method (B): 1 bit</dt> <dd><t>Indicates how transparent pixels of<em>the currentthe <em>current frame</em> are to be blended with corresponding pixels of the previous canvas:</t> <ul spacing="normal"> <li><tt>0</tt>: Use alpha-blending. After disposing of the previous frame, render the current frame on the canvas using <xref target="alpha-blending">alpha-blending</xref>. If the current frame does not have an alpha channel, assume the alpha value is 255, effectively replacing the rectangle.</li> <li><tt>1</tt>: Do not blend. After disposing of the previous frame, render the current frame on the canvas by overwriting the rectangle covered by the current frame.</li> </ul> </dd> <dt>Disposal method (D): 1 bit</dt> <dd><t>Indicates how<em>the currentthe <em>current frame</em> is to be treated after it has been displayed (before rendering the next frame) on the canvas:</t> <ul spacing="normal"> <li><tt>0</tt>: Do not dispose. Leave the canvas as is.</li> <li><tt>1</tt>: Dispose to the background color. Fill the <em>rectangle</em> on the canvas covered by the <em>current frame</em> with the background color specified in the <xref target="anim_chunk">'ANIM' Chunk</xref>.</li> </ul> <t>Notes:</t> <ul spacing="normal"> <li>The frame disposal only applies to the <em>frame rectangle</em>, that is, the rectangle defined by <em>Frame X</em>, <em>Frame Y</em>, <em>frame width</em>, and <em>frame height</em>. It may or may not cover the whole canvas.</li> <li anchor="alpha-blending"><t>Alpha-blending:</t> <t>Given that each of the R, G, B, and A channels is 8 bits and the RGB channels are <em>not premultiplied</em> by alpha, the formula for blending 'dst' onto 'src' is:</t> <sourcecode type="pseudocode"><![CDATA[ blend.A = src.A + dst.A * (1 - src.A / 255) if blend.A = 0 then blend.RGB = 0 else blend.RGB = (src.RGB * src.A + dst.RGB * dst.A * (1 - src.A / 255)) / blend.A ]]></sourcecode> </li> <li>Alpha-blending <bcp14>SHOULD</bcp14> be done in linear color space by taking into account the <xref target="color-profile">color profile</xref> of the image. If the color profile is not present, standard RGB (sRGB) is to be assumed. (Note that sRGB also needs to be linearized due to a gamma of ~2.2.)</li> </ul> </dd> <dt>Frame Data: <em>Chunk Size</em> - <tt>16</tt> bytes</dt> <dd><t>Consistsof:</t>of the following:</t> <ul spacing="normal"><li>An<li>an optional <xref target="alpha">alpha subchunk</xref> for theframe.</li> <li>Aframe</li> <li>a <xref target="bitstream-vp8vp8l">bitstream subchunk</xref> for theframe.</li> <li>Anframe</li> <li>an optional list of <xref target="unknown-chunks">unknownchunks</xref>.</li>chunks</xref></li> </ul> </dd> </dl> <t>Note: The 'ANMF' payload, i.e., <em>Frame Data</em>, consists of individual <em>padded</em> chunks, as described by the <xref target="riff-file-format">RIFF file format</xref>.</t> </section> <section anchor="alpha" numbered="true" toc="default"> <name>Alpha</name> <figure> <name>'ALPH' Chunk</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ChunkHeader('ALPH') | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |Rsv| P | F | C | Alpha Bitstream... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>Reserved (Rsv): 2 bits</dt> <dd><bcp14>MUST</bcp14> be <tt>0</tt>. Readers <bcp14>MUST</bcp14> ignore this field.</dd> <dt>Preprocessing (P): 2 bits</dt> <dd><t>These informative bits are used to signal the preprocessing that has been performed during compression. The decoder can use this information to, for example, dither the values or smooth the gradients prior to display.</t> <ul spacing="normal"> <li><tt>0</tt>: No preprocessing.</li> <li><tt>1</tt>: Level reduction.</li> </ul> <t>Decoders are not required to use this information in any specified way.</t> </dd> <dt>Filtering method (F): 2 bits</dt> <dd><t>The filtering methods used are described as follows:</t> <ul spacing="normal"> <li><tt>0</tt>: None.</li> <li><tt>1</tt>: Horizontal filter.</li> <li><tt>2</tt>: Vertical filter.</li> <li><tt>3</tt>: Gradient filter.</li> </ul> <t>For each pixel, filtering is performed using the following calculations. Assume the alpha values surrounding the current <tt>X</tt> position are labeled as:</t> <!--[rfced] Tables 1-4 and Figures 11, 19, and 20 do not have titles. Please review and provide titles if desired. --> <figure> <artwork name="" type="" align="left" alt=""><![CDATA[ C | B | ---+---+ A | X | ]]></artwork> </figure> <t>We seek to compute the alpha value at position X. First, a prediction is made depending on the filtering method:</t> <ul spacing="normal"> <li>Method <tt>0</tt>: predictor = 0</li> <li>Method <tt>1</tt>: predictor = A</li> <li>Method <tt>2</tt>: predictor = B</li> <li>Method <tt>3</tt>: predictor = clip(A + B - C)</li> </ul> <t>where <tt>clip(v)</tt> is equal to:</t> <ul spacing="normal"> <li>0 if v < 0,</li> <li>255 if v > 255, or</li> <li>v otherwise.</li> </ul> <t>The final value is derived by adding the decompressed value <tt>X</tt> to the predictor and using modulo-256 arithmetic to wrap the [256..511] range into the [0..255] one:</t> <sourcecode type="c"><![CDATA[ alpha = (predictor + X) % 256 ]]></sourcecode> <t>There are special cases for theleft-mostleftmost andtop-mosttopmost pixel positions.</t> <t>For example, the top-left value at location (0, 0) uses 0 as the predictor value. Otherwise:</t> <ul spacing="normal"> <li>For horizontal or gradient filtering methods, theleft-mostleftmost pixels at location (0, y) are predicted using the location (0, y-1) just above.</li> <li>For vertical or gradient filtering methods, thetop-mosttopmost pixels at location (x, 0) are predicted using the location (x-1, 0) on the left.</li> </ul> </dd> <dt>Compression method (C): 2 bits</dt> <dd><t>The compression method used:</t> <ul spacing="normal"> <li><tt>0</tt>: No compression.</li> <li><tt>1</tt>: Compressed using the WebP lossless format.</li> </ul> </dd> <!--[rfced] Is "1 bytes" (plural) correct, or should it be updated as "1 byte" (singular)? Original: Alpha bitstream: _Chunk Size_ - 1 bytes Encoded alpha bitstream. --> <dt>Alpha bitstream: <em>Chunk Size</em> - <tt>1</tt> bytes</dt> <dd>Encoded alpha bitstream.</dd> </dl> <t>This optional chunk contains encoded alpha data for this frame. A frame containing a 'VP8L' Chunk <bcp14>SHOULD NOT</bcp14> contain this chunk.</t> <aside><t>Rationale: The transparency information is already part of the 'VP8L' Chunk.</t></aside> <t>The alpha channel data is stored as uncompressed raw data (when the compression method is '0') or compressed using the lossless format (when the compression method is '1').</t> <ul spacing="normal"> <li>Raw data: This consists of a byte sequence of length = width * height, containing all the 8-bit transparency values in scan order.</li> <li><t>Lossless format compression: The byte sequence is a compressed image-stream (as described in <xref target="webp-lossless"/>) of implicit dimensions width x height. That is, this image-stream does NOT contain any headers describing the image dimensions.</t> <t>Rationale: The dimensions are already known from other sources, so storing them again would be redundant and prone to errors.</t> <t>Once the image-stream is decoded into Alpha, Red, Green, Blue (ARGB) color values, following the process described in the lossless format specification, the transparency information must be extracted from the green channel of the ARGB quadruplet.</t> <t>Rationale: The green channel is allowed extra transformation steps in the specification -- unlike the other channels -- that can improve compression.</t></li> </ul> </section> <section anchor="bitstream-vp8vp8l" numbered="true" toc="default"> <name>Bitstream (VP8/VP8L)</name> <t>This chunk contains compressed bitstream data for a single frame.</t> <t>A bitstream chunk may be either (i) a 'VP8 'Chunk,Chunk using 'VP8 ' (note the significant fourth-character space) as itsFourCC,FourCC <em>or</em> (ii) a 'VP8L'Chunk,Chunk using 'VP8L' as its FourCC.</t> <t>The formats of' VP8 ' and 'VP8L' Chunks are as described in Sections <xref target="simple-file-format-lossy" format="counter"/> and <xref target="simple-file-format-lossless" format="counter"/>, respectively.</t> </section> <section anchor="color-profile" numbered="true" toc="default"> <name>Color Profile</name> <figure> <name>'ICCP' Chunk</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ChunkHeader('ICCP') | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : Color Profile : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>Color Profile: <em>Chunk Size</em> bytes</dt> <dd>ICC profile.</dd> </dl> <t>This chunk <bcp14>MUST</bcp14> appear before the image data.</t> <t>There <bcp14>SHOULD</bcp14> be at most one such chunk. If there are more such chunks, readers <bcp14>MAY</bcp14> ignore all except the first one. See the <xref target="ICC">ICC specification</xref> for details.</t> <t>If this chunk is not present, sRGB <bcp14>SHOULD</bcp14> be assumed.</t> </section> <section anchor="metadata" numbered="true" toc="default"> <name>Metadata</name> <t>Metadata can be stored in 'EXIF' or 'XMP ' Chunks.</t> <t>There <bcp14>SHOULD</bcp14> be at most one chunk of each type ('EXIF' and 'XMP '). If there are more such chunks, readers <bcp14>MAY</bcp14> ignore all except the first one.</t> <t>The chunks are defined as follows:</t> <t> 'EXIF' Chunk: </t> <figure> <name>'EXIF' Chunk</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ChunkHeader('EXIF') | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : Exif Metadata : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>Exif Metadata: <em>Chunk Size</em> bytes</dt> <dd>Image metadata in <xref target="Exif"/> format.</dd> </dl> <t> 'XMP ' Chunk: </t> <figure> <name>'XMP ' Chunk</name> <artwork name="" type="" align="left" alt=""><![CDATA[ 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ChunkHeader('XMP ') | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ : XMP Metadata : +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ]]></artwork> </figure> <dl newline="true" spacing="normal" indent="4"> <dt>XMP Metadata: <em>Chunk Size</em> bytes</dt> <dd>Image metadata in <xref target="XMP"/> format.</dd> </dl> <t>Note that the fourth character in the 'XMP ' FourCC is an ASCII space (0x20).</t> <t>Additional guidance about handling metadata can be found in the Metadata Working Group's <xref target="MWG">"Guidelines For Handling Image Metadata"</xref>.</t> </section> <section anchor="unknown-chunks" numbered="true" toc="default"> <name>Unknown Chunks</name> <t>A RIFF chunk (described in <xref target="riff-file-format"/>) whose <em>FourCC</em> is different from any of the chunks described in this section is considered an <em>unknown chunk</em>.</t> <aside><t>Rationale: Allowing unknown chunks gives a provision for futureextensionextensions of the format and also allows storage of any application-specific data.</t></aside> <t>A file <bcp14>MAY</bcp14> contain unknown chunks:</t> <ul spacing="normal"> <li>at the end of the file, as described in <xref target="ext-file-form"/>, or</li> <li>at the end of 'ANMF' Chunks, as described in <xref target="animation"/>.</li> </ul> <t>Readers <bcp14>SHOULD</bcp14> ignore these chunks. Writers <bcp14>SHOULD</bcp14> preserve them in their original order (unless they specifically intend to modify these chunks).</t> </section> </section> <section numbered="true" toc="default"> <name>Canvas Assembly from Frames</name> <t>Here, we provide an overview of how a reader <bcp14>MUST</bcp14> assemble a canvas in the case of an animated image.</t> <t>The process begins with creating a canvas using the dimensions given in the 'VP8X'Chunk,Chunk: <tt>Canvas Width Minus One + 1</tt> pixels wide by <tt>Canvas Height Minus One + 1</tt> pixels high. The <tt>Loop Count</tt> field from the 'ANIM' Chunk controls how many times the animation process is repeated. This is <tt>Loop Count - 1</tt> for nonzero <tt>Loop Count</tt> values or infinite if the <tt>Loop Count</tt> is zero.</t> <t>At the beginning of each loop iteration, the canvas is filled using the background color from the 'ANIM' Chunk or an application-defined color.</t> <t>'ANMF' Chunks contain individual frames given in display order. Before rendering each frame, the previous frame's <tt>Disposal method</tt> is applied.</t> <t>The rendering of the decoded frame begins at the Cartesian coordinates (<tt>2 * Frame X</tt>, <tt>2 * Frame Y</tt>), using the top-left corner of the canvas as the origin. <tt>Frame Width Minus One + 1</tt> pixels wide by <tt>Frame Height Minus One + 1</tt> pixels highareis rendered onto the canvas using the <tt>Blending method</tt>.</t> <t>The canvas is displayed for <tt>Frame Duration</tt> milliseconds. This continues until all frames given by 'ANMF' Chunks have been displayed. A new loop iteration is then begun, or the canvas is left in its final state if all iterations have been completed.</t> <t>The following pseudocode illustrates the rendering process. The notation <em>VP8X.field</em> means the field in the 'VP8X' Chunk with the same description.</t> <sourcecode type="pseudocode"><![CDATA[ VP8X.flags.hasAnimation MUST be TRUE canvas <- new image of size VP8X.canvasWidth x VP8X.canvasHeight with background color ANIM.background_color. loop_count <- ANIM.loopCount dispose_method <- Dispose to background color if loop_count == 0: loop_count = inf frame_params <- nil next chunk in image_data is ANMF MUST be TRUE for loop = 0..loop_count - 1 clear canvas to ANIM.background_color or application-defined color until eof or non-ANMF chunk frame_params.frameX = Frame X frame_params.frameY = Frame Y frame_params.frameWidth = Frame Width Minus One + 1 frame_params.frameHeight = Frame Height Minus One + 1 frame_params.frameDuration = Frame Duration frame_right = frame_params.frameX + frame_params.frameWidth frame_bottom = frame_params.frameY + frame_params.frameHeight VP8X.canvasWidth >= frame_right MUST be TRUE VP8X.canvasHeight >= frame_bottom MUST be TRUE for subchunk in 'Frame Data': if subchunk.tag == "ALPH": alpha subchunks not found in 'Frame Data' earlier MUST be TRUE frame_params.alpha = alpha_data else if subchunk.tag == "VP8 " OR subchunk.tag == "VP8L": bitstream subchunks not found in 'Frame Data' earlier MUST be TRUE frame_params.bitstream = bitstream_data render frame with frame_params.alpha and frame_params.bitstream on canvas with top-left corner at (frame_params.frameX, frame_params.frameY), using Blending method frame_params.blendingMethod. canvas contains the decoded image. Show the contents of the canvas for frame_params.frameDuration * 1 ms. dispose_method = frame_params.disposeMethod ]]></sourcecode> </section> <section numbered="true" toc="default"> <name>Example File Layouts</name> <t>A lossy-encoded image with alpha may look as follows:</t> <figure> <name>A Lossy-Encoded Image with Alpha</name> <artwork name="" type="" align="left" alt=""><![CDATA[ RIFF/WEBP +- VP8X (descriptions of features used) +- ALPH (alpha bitstream) +- VP8 (bitstream) ]]></artwork> </figure> <t>A lossless-encoded image may look as follows:</t> <figure> <name>A Lossless-Encoded Image</name> <artwork name="" type="" align="left" alt=""><![CDATA[ RIFF/WEBP +- VP8X (descriptions of features used) +- VP8L (lossless bitstream) +- XYZW (unknown chunk) ]]></artwork> </figure> <t>A lossless image with an ICC profile and XMP metadata may look as follows:</t> <figure> <name>A Lossless Image with an ICC Profile and XMP Metadata</name> <artwork name="" type="" align="left" alt=""><![CDATA[ RIFF/WEBP +- VP8X (descriptions of features used) +- ICCP (color profile) +- VP8L (lossless bitstream) +- XMP (metadata) ]]></artwork> </figure> <t>An animated image with Exif metadata may look as follows:</t> <figure> <name>An Animated Image with Exif Metadata</name> <artwork name="" type="" align="left" alt=""><![CDATA[ RIFF/WEBP +- VP8X (descriptions of features used) +- ANIM (global animation parameters) +- ANMF (frame1 parameters + data) +- ANMF (frame2 parameters + data) +- ANMF (frame3 parameters + data) +- ANMF (frame4 parameters + data) +- EXIF (metadata) ]]></artwork> </figure> </section> </section> </section> <section anchor="webp-lossless" numbered="true" toc="default"> <name>Specification for WebP Lossless Bitstream</name> <t>Note that this section is based on the documentation in the <xref target="webp-lossless-src">libwebp source repository</xref>.</t> <section numbered="true" toc="default"> <name>Abstract (from "Specification for WebP Lossless Bitstream")</name> <t>WebP lossless format is an image format for lossless compression of ARGB images. The lossless format stores and restores the pixel values exactly, including the color values for pixels whose alpha value is 0. <!--[rfced] We note that "subresolution" has not been used in previously published RFCs. Will readers understand the meaning of this term, or may we update its usage throughout the document to "sub-pixel resolution" instead for clarity? For example: Original: The format uses subresolution images, recursively embedded into the format itself, for storing statistical data about the images, such as the used entropy codes, spatial predictors, color space Perhaps: The format uses sub-pixel resolution images, recursively embedded into the format itself, for storing statistical data about the images, such as the used entropy codes, spatial predictors, color space --> The format uses subresolution images, recursively embedded into the format itself, for storing statistical data about the images, such as the used entropy codes, spatial predictors, color space conversion, and color table. A universal algorithm for sequential data compression <xref target="LZ77"/>, prefix coding, and a color cache are used for compression of the bulk data. Decoding speeds faster than PNG have been demonstrated, as well as 25% denser compression than can be achieved using today's PNG format <xref target="webp-lossless-study"/>.</t> </section> <section numbered="true" toc="default"> <name>Introduction (from "Specification for WebP Lossless Bitstream") </name> <t>This section describes the compressed data representation of a WebP lossless image.</t> <t>In this section, we extensively use C programming language syntax <xref target="ISO.9899.2018"/> to describe the bitstream and assume the existence of a function for reading bits, <tt>ReadBits(n)</tt>. The bytes are read in the natural order of the stream containing them, and bits of each byte are read in least-significant-bit-first order. When multiple bits are read at the same time, the integer is constructed from the original data in the original order. The most significant bits of the returned integer are also the most significant bits of the original data. Thus, the statement</t> <sourcecode type="c"><![CDATA[ b = ReadBits(2); ]]></sourcecode> <t>is equivalent with the two statements below:</t> <sourcecode type="c"><![CDATA[ b = ReadBits(1); b |= ReadBits(1) << 1; ]]></sourcecode> <t>We assume that each color component (that is, alpha, red, blue, and green) is represented using an 8-bit byte. We define the corresponding type as uint8. A whole ARGB pixel is represented by a type called uint32, which is an unsigned integer consisting of 32 bits. In the code showing the behavior of the transforms, these values are codified in the following bits: alpha in bits 31..24, red in bits 23..16, green in bits 15..8, and blue in bits 7..0; however, implementations of the format are free to use another representation internally.</t> <t>Broadly, a WebP lossless image contains header data, transform information, and actual image data. Headers contain the width and height of the image. A WebP lossless image can go through four different types of transforms before being entropy encoded. The transform information in the bitstream contains the data required to apply the respective inverse transforms.</t> </section> <section numbered="true" toc="default"> <name>Nomenclature</name> <dl newline="true" spacing="normal" indent="4"> <dt>ARGB</dt> <dd>A pixel value consisting of alpha, red, green, and blue values.</dd> <dt>ARGB image</dt> <dd>A two-dimensional array containing ARGB pixels.</dd> <dt>color cache</dt> <dd>Asmallsmall, hash-addressed array to store recently used colors to be able to recall them with shorter codes.</dd> <dt>color indexing image</dt> <dd>A one-dimensional image of colors that can be indexed using a small integer (up to 256 within WebP lossless).</dd> <dt>color transform image</dt> <dd>A two-dimensional subresolution image containing data about correlations of color components.</dd> <dt>distance mapping</dt> <dd>Changes LZ77 distances to have the smallest values for pixels in two-dimensional proximity.</dd> <dt>entropy image</dt> <dd>A two-dimensional subresolution image indicating which entropy coding should be used in a respective square in the image, that is, each pixel is a meta prefix code.</dd> <dt><xref target="LZ77"/></dt> <dd>A dictionary-based sliding window compression algorithm that either emits symbols or describes them as sequences of past symbols.</dd> <dt>meta prefix code</dt> <dd>A small integer (up to 16 bits) that indexes an element in the meta prefix table.</dd> <dt>predictor image</dt> <dd>A two-dimensional subresolution image indicating which spatial predictor is used for a particular square in the image.</dd> <dt>prefix code</dt> <dd>A classic way to do entropy coding where a smaller number of bits are used for more frequent codes.</dd> <dt>prefix coding</dt> <dd>A way to entropy code larger integers, which codes a few bits of the integer using an entropy code and codifies the remaining bits raw. This allows for the descriptions of the entropy codes to remain relatively small even when the range of symbols is large.</dd> <dt>scan-line order</dt> <dd>A processing order of pixels (left to right and top to bottom), starting from the left-hand-top pixel. Once a row is completed, continue from the left-hand column of the next row.</dd> </dl> </section> <section numbered="true" toc="default"> <name>RIFF Header</name> <t>The beginning of the header has the RIFF container. This consists of the following 21 bytes:</t> <ol spacing="normal"> <li>String 'RIFF'.</li> <li>A little-endian, 32-bit value of the chunk length, which is the whole size of the chunk controlled by the RIFF header. Normally, this equals the payload size (file size minus 8 bytes: 4 bytes for the 'RIFF' identifier and 4 bytes for storing the value itself).</li> <li>String 'WEBP' (RIFF container name).</li> <li>String 'VP8L' (FourCC for lossless-encoded image data).</li> <li>A little-endian, 32-bit value of the number of bytes in the lossless stream.</li> <li>1-byte signature 0x2f.</li> </ol> <t>The first 28 bits of the bitstream specify the width and height of the image. Width and height are decoded as 14-bit integers as follows:</t> <sourcecode type="c"><![CDATA[ int image_width = ReadBits(14) + 1; int image_height = ReadBits(14) + 1; ]]></sourcecode> <t>The 14-bit precision for image width and height limits the maximum size of a WebP lossless image to 16384x16384 pixels.</t> <t>The alpha_is_used bit is a hint only and <bcp14>SHOULD NOT</bcp14> impact decoding. It <bcp14>SHOULD</bcp14> be set to 0 when all alpha values are 255 in the picture and 1 otherwise.</t> <sourcecode type="c"><![CDATA[ int alpha_is_used = ReadBits(1); ]]></sourcecode> <t>The version_number is a 3-bit code that <bcp14>MUST</bcp14> be set to 0. Any other value <bcp14>MUST</bcp14> be treated as an error.</t> <sourcecode type="c"><![CDATA[ int version_number = ReadBits(3); ]]></sourcecode> </section> <section numbered="true" toc="default"> <name>Transforms</name> <t>The transforms are reversible manipulations of the image data that can reduce the remaining symbolic entropy by modeling spatial and color correlations. They can make the final compression more dense.</t> <t>An image can go through four types of transforms. A 1 bit indicates the presence of a transform. Each transform is allowed to be used only once. The transforms are used only for the main-level ARGB image; the subresolution images (color transform image, entropy image, and predictor image) have no transforms, not even the 0 bit indicating the end of transforms.</t><aside><t>Typically,<aside><t>Note: Typically, an encoder would use these transforms to reduce the Shannon entropy in the residual image. Also, the transform data can be decided based on entropy minimization.</t></aside> <sourcecode type="c"><![CDATA[ while (ReadBits(1)) { // Transform present. // Decode transform type. enum TransformType transform_type = ReadBits(2); // Decode transform data. ... } // Decode actual image data. ]]></sourcecode> <t>If a transform is present, then the next two bits specify the transform type. There are four types of transforms.</t> <table align="left"> <thead> <tr> <th>Transform</th> <th>Bit</th> </tr> </thead> <tbody> <tr> <td>PREDICTOR_TRANSFORM</td> <td>0</td> </tr> <tr> <td>COLOR_TRANSFORM</td> <td>1</td> </tr> <tr> <td>SUBTRACT_GREEN_TRANSFORM</td> <td>2</td> </tr> <tr> <td>COLOR_INDEXING_TRANSFORM</td> <td>3</td> </tr> </tbody> </table> <t>The transform type is followed by the transform data. Transform data contains the information required to apply the inverse transform and depends on the transform type. The inverse transforms are applied in the reverse order that they are read from the bitstream, that is, last one first.</t> <t>Next, we describe the transform data for different types.</t> <section anchor="predictor-transform" numbered="true" toc="default"> <name>Predictor Transform</name> <t>The predictor transform can be used to reduce entropy by exploiting the fact that neighboring pixels are often correlated. In the predictor transform, the current pixel value is predicted from the pixels already decoded (in scan-line order) and only the residual value (actual - predicted) is encoded. The green component of a pixel defines which of the 14 predictors is used within a particular block of the ARGB image. The <em>prediction mode</em> determines the type of prediction to use. We divide the image into squares, and all the pixels in a square use the same prediction mode.</t> <t>The first 3 bits of prediction data define the block width and height in number of bits.</t> <sourcecode type="c"><![CDATA[ int size_bits = ReadBits(3) + 2; int block_width = (1 << size_bits); int block_height = (1 << size_bits); #define DIV_ROUND_UP(num, den) (((num) + (den) - 1) / (den)) int transform_width = DIV_ROUND_UP(image_width, 1 << size_bits); ]]></sourcecode> <t>The transform data contains the prediction mode for each block of the image. It is a subresolution image where the green component of a pixel defines which of the 14 predictors is used for all the <tt>block_width * block_height</tt> pixels within a particular block of the ARGB image. This subresolution image is encoded using the same techniques described in <xref target="image-data"/>.</t> <t>The number of block columns, i.e., <tt>transform_width</tt>, is used in two-dimensional indexing. For a pixel (x, y), one can compute the respective filter block address by:</t> <sourcecode type="c"><![CDATA[ int block_index = (y >> size_bits) * transform_width + (x >> size_bits); ]]></sourcecode> <t>There are 14 different prediction modes. In each prediction mode, the current pixel value is predicted from one or more neighboring pixels whose values are already known.</t> <t>We chose the neighboring pixels (TL, T, TR, and L) of the current pixel (P) as follows:</t> <figure> <artwork name="" type="ascii-art" align="left" alt=""><![CDATA[ O O O O O O O O O O O O O O O O O O O O O O O O O O TL T TR O O O O O O O O L P X X X X X X X X X X X X X X X X X X X X X X X X X X X ]]></artwork> </figure> <t>where TL means top-left, T means top, TR means top-right, and L means left. At the time of predicting a value for P, all O, TL, T, TR, and L pixels have already been processed, and the P pixel and all X pixels are unknown.</t> <t>Given the preceding neighboring pixels, the different prediction modes are defined as follows.</t> <table align="left"> <thead> <tr> <th>Mode</th> <th>Predicted Value of Each Channel of the Current Pixel</th> </tr> </thead> <tbody> <tr> <td>0</td> <td>0xff000000 (represents solid black color in ARGB)</td> </tr> <tr> <td>1</td> <td>L</td> </tr> <tr> <td>2</td> <td>T</td> </tr> <tr> <td>3</td> <td>TR</td> </tr> <tr> <td>4</td> <td>TL</td> </tr> <tr> <td>5</td> <td>Average2(Average2(L, TR), T)</td> </tr> <tr> <td>6</td> <td>Average2(L, TL)</td> </tr> <tr> <td>7</td> <td>Average2(L, T)</td> </tr> <tr> <td>8</td> <td>Average2(TL, T)</td> </tr> <tr> <td>9</td> <td>Average2(T, TR)</td> </tr> <tr> <td>10</td> <td>Average2(Average2(L, TL), Average2(T, TR))</td> </tr> <tr> <td>11</td> <td>Select(L, T, TL)</td> </tr> <tr> <td>12</td> <td>ClampAddSubtractFull(L, T, TL)</td> </tr> <tr> <td>13</td> <td>ClampAddSubtractHalf(Average2(L, T), TL)</td> </tr> </tbody> </table> <t><tt>Average2</tt> is defined as follows for each ARGB component:</t> <sourcecode type="c"><![CDATA[ uint8 Average2(uint8 a, uint8 b) { return (a + b) / 2; } ]]></sourcecode> <t>The Select predictor is defined as follows:</t> <sourcecode type="c"><![CDATA[ uint32 Select(uint32 L, uint32 T, uint32 TL) { // L = left pixel, T = top pixel, TL = top-left pixel. // ARGB component estimates for prediction. int pAlpha = ALPHA(L) + ALPHA(T) - ALPHA(TL); int pRed = RED(L) + RED(T) - RED(TL); int pGreen = GREEN(L) + GREEN(T) - GREEN(TL); int pBlue = BLUE(L) + BLUE(T) - BLUE(TL); // Manhattan distances to estimates for left and top pixels. int pL = abs(pAlpha - ALPHA(L)) + abs(pRed - RED(L)) + abs(pGreen - GREEN(L)) + abs(pBlue - BLUE(L)); int pT = abs(pAlpha - ALPHA(T)) + abs(pRed - RED(T)) + abs(pGreen - GREEN(T)) + abs(pBlue - BLUE(T)); // Return either left or top, the one closer to the prediction. if (pL < pT) { return L; } else { return T; } } ]]></sourcecode> <t>The functions <tt>ClampAddSubtractFull</tt> and <tt>ClampAddSubtractHalf</tt> are performed for each ARGB component as follows:</t> <sourcecode type="c"><![CDATA[ // Clamp the input value between 0 and 255. int Clamp(int a) { return (a < 0) ? 0 : (a > 255) ? 255 : a; } int ClampAddSubtractFull(int a, int b, int c) { return Clamp(a + b - c); } int ClampAddSubtractHalf(int a, int b) { return Clamp(a + (a - b) / 2); } ]]></sourcecode> <t>There are special handling rules for some border pixels. If there is a prediction transform, regardless of the mode [0..13] for these pixels, the predicted value for the left-topmost pixel of the image is 0xff000000, all pixels on the top row areL-pixel,L pixels, and all pixels on the leftmost column areT-pixel.</t>T pixels.</t> <t>Addressing theTR-pixelTR pixel for pixels on the rightmost column is exceptional. The pixels on the rightmost column are predicted by using the modes [0..13], just like pixels not on the border, but the leftmost pixel on the same row as the current pixel is instead used as theTR-pixel.</t>TR pixel.</t> <t>The final pixel value is obtained by adding each channel of the predicted value to the encoded residual value.</t> <sourcecode type="c"><![CDATA[ void PredictorTransformOutput(uint32 residual, uint32 pred, uint8* alpha, uint8* red, uint8* green, uint8* blue) { *alpha = ALPHA(residual) + ALPHA(pred); *red = RED(residual) + RED(pred); *green = GREEN(residual) + GREEN(pred); *blue = BLUE(residual) + BLUE(pred); } ]]></sourcecode> </section> <section anchor="color-transform" numbered="true" toc="default"> <name>Color Transform</name> <t>The goal of the color transform is to decorrelate the R, G, and B values of each pixel. The color transform keeps the green (G) value as it is, transforms the red (R) value based on the green value, and transforms the blue (B) value based on the green value and then on the red value.</t> <t>As is the case for the predictor transform, first the image is divided into blocks, and the same transform mode is used for all the pixels in a block. For each block, there are three types of color transform elements.</t> <sourcecode type="c"><![CDATA[ typedef struct { uint8 green_to_red; uint8 green_to_blue; uint8 red_to_blue; } ColorTransformElement; ]]></sourcecode> <t>The actual color transform is done by defining a color transform delta. The color transform delta depends on the <tt>ColorTransformElement</tt>, which is the same for all the pixels in a particular block. The delta is subtracted during the color transform. The inverse color transform then is just adding those deltas.</t> <t>The color transform function is defined as follows:</t> <sourcecode type="c"><![CDATA[ void ColorTransform(uint8 red, uint8 blue, uint8 green, ColorTransformElement *trans, uint8 *new_red, uint8 *new_blue) { // Transformed values of red and blue components int tmp_red = red; int tmp_blue = blue; // Applying the transform is just subtracting the transform deltas tmp_red -= ColorTransformDelta(trans->green_to_red, green); tmp_blue -= ColorTransformDelta(trans->green_to_blue, green); tmp_blue -= ColorTransformDelta(trans->red_to_blue, red); *new_red = tmp_red & 0xff; *new_blue = tmp_blue & 0xff; } ]]></sourcecode> <t><tt>ColorTransformDelta</tt> is computed using a signed 8-bit integer representing a 3.5-fixed-point number and a signed 8-bit RGB color channel (c) [-128..127] and is defined as follows:</t> <sourcecode type="c"><![CDATA[ int8 ColorTransformDelta(int8 t, int8 c) { return (t * c) >> 5; } ]]></sourcecode> <t>A conversion from the 8-bit unsigned representation (<tt>uint8</tt>) to the 8-bit signed one (<tt>int8</tt>) is required before calling <tt>ColorTransformDelta()</tt>. The signed value should be interpreted as an 8-bit two's complement number (that is: uint8 range [128..255] is mapped to the [-128..-1] range of its converted int8 value).</t> <t>The multiplication is to be done using more precision (with at least 16-bit precision). <!--[rfced] May we clarify "and there" as follows? Original: The sign extension property of the shift operation does not matter here; only the lowest 8 bits are used from the result, and there the sign extension shifting and unsigned shifting are consistent with each other. Perhaps: The sign extension property of the shift operation does not matter here; only the lowest 8 bits are used from the result, and in these bits, the sign extension shifting and unsigned shifting are consistent with each other. --> The sign extension property of the shift operation does not matter here; only the lowest 8 bits are used from the result, and there the sign extension shifting and unsigned shifting are consistent with each other.</t> <t>Now, we describe the contents of color transform data so that decoding can apply the inverse color transform and recover the original red and blue values. The first 3 bits of the color transform data contain the width and height of the image block in number of bits, just like the predictor transform:</t> <sourcecode type="c"><![CDATA[ int size_bits = ReadBits(3) + 2; int block_width = 1 << size_bits; int block_height = 1 << size_bits; ]]></sourcecode> <t>The remaining part of the color transform data contains <tt>ColorTransformElement</tt> instances, corresponding to each block of the image. Each <tt>ColorTransformElement</tt> <tt>'cte'</tt> is treated as a pixel in a subresolution image whose alpha component is <tt>255</tt>, red component is <tt>cte.red_to_blue</tt>, green component is <tt>cte.green_to_blue</tt>, and blue component is <tt>cte.green_to_red</tt>.</t> <t>During decoding, <tt>ColorTransformElement</tt> instances of the blocks are decoded and the inverse color transform is applied on the ARGB values of the pixels. As mentioned earlier, that inverse color transform is just adding <tt>ColorTransformElement</tt> values to the red and blue channels. The alpha and green channels are left as is.</t> <sourcecode type="c"><![CDATA[ void InverseTransform(uint8 red, uint8 green, uint8 blue, ColorTransformElement *trans, uint8 *new_red, uint8 *new_blue) { // Transformed values of red and blue components int tmp_red = red; int tmp_blue = blue; // Applying the inverse transform is just adding the // color transform deltas tmp_red += ColorTransformDelta(trans->green_to_red, green); tmp_blue += ColorTransformDelta(trans->green_to_blue, green); tmp_blue += ColorTransformDelta(trans->red_to_blue, tmp_red & 0xff); *new_red = tmp_red & 0xff; *new_blue = tmp_blue & 0xff; } ]]></sourcecode> </section> <section numbered="true" toc="default"> <name>Subtract Green Transform</name> <t>The subtract green transform subtracts green values from red and blue values of each pixel. When this transform is present, the decoder needs to add the green value to both the red and blue values. There is no data associated with this transform. The decoder applies the inverse transform as follows:</t> <sourcecode type="c"><![CDATA[ void AddGreenToBlueAndRed(uint8 green, uint8 *red, uint8 *blue) { *red = (*red + green) & 0xff; *blue = (*blue + green) & 0xff; } ]]></sourcecode> <t>This transform is redundant, as it can be modeled using the color transform, but since there is no additional data here, the subtract green transform can be coded using fewer bits than a full-blown color transform.</t> </section> <section anchor="color-indexing-transform" numbered="true" toc="default"> <name>Color Indexing Transform</name> <t>If there are not many unique pixel values, it may be more efficient to create a color index array and replace the pixel values by the array's indices. The color indexing transform achieves this. (In the context of WebP lossless, we specifically do not call this a palette transform because a similar but more dynamic concept exists in WebP lossless encoding: color cache.)</t> <t>The color indexing transform checks for the number of unique ARGB values in the image. If that number is below a threshold (256), it creates an array of those ARGB values, which is then used to replace the pixel values with the corresponding index: the green channel of the pixels are replaced with the index, all alpha values are set to 255, and all red and blue values are set to 0.</t> <t>The transform data contains the color table size and the entries in the color table. The decoder reads the color indexing transform data as follows:</t> <sourcecode type="c"><![CDATA[ // 8-bit value for the color table size int color_table_size = ReadBits(8) + 1; ]]></sourcecode> <t>The color table is stored using the image storage format itself. The color table can be obtained by reading animage,image without the RIFF header, image size, and transforms, assuming the height of 1 pixel and the width of <tt>color_table_size</tt>. The color table is always subtraction-coded to reduce image entropy. The deltas of palette colorscontaintypically contain much less entropy than the colors themselves, leading to significant savings for smaller images. In decoding, every final color in the color table can be obtained by adding the previous color component values by each ARGB component separately and storing the least significant 8 bits of the result.</t> <t>The inverse transform for the image is simply replacing the pixel values (which are indices to the color table) with the actual color table values. The indexing is done based on the green component of the ARGB color.</t> <sourcecode type="c"><![CDATA[ // Inverse transform argb = color_table[GREEN(argb)]; ]]></sourcecode> <t>If the index is equal to or larger than <tt>color_table_size</tt>, the argb color value should be set to 0x00000000 (transparent black).</t> <t>When the color table is small (equal to or less than 16 colors), several pixels are bundled into a single pixel. The pixel bundling packs several (2, 4, or 8) pixels into a single pixel, reducing the image width respectively.</t><aside><t>Pixel<aside><t>Note: Pixel bundling allows for a more efficient joint distribution entropy coding of neighboring pixels and gives some arithmetic coding-like benefits to the entropy code, but it can only be used when there are 16 or fewer unique values.</t></aside> <t><tt>color_table_size</tt> specifies how many pixels are combined:</t> <table align="left"> <thead> <tr> <th>color_table_size</th> <th>width_bits value</th> </tr> </thead> <tbody> <tr> <td>1..2</td> <td>3</td> </tr> <tr> <td>3..4</td> <td>2</td> </tr> <tr> <td>5..16</td> <td>1</td> </tr> <tr> <td>17..256</td> <td>0</td> </tr> </tbody> </table> <t><tt>width_bits</tt> has a value of 0, 1, 2, or 3. A value of 0 indicates no pixel bundling is to be done for the image. A value of 1 indicates that two pixels are combined, and each pixel has a range of [0..15]. A value of 2 indicates that four pixels are combined, and each pixel has a range of [0..3]. A value of 3 indicates that eight pixels are combined, and each pixel has a range of [0..1], that is, a binary value.</t> <t>The values are packed into the green component as follows:</t> <ul spacing="normal"> <li><tt>width_bits</tt> = 1: For every x value, where x = 2k + 0, a green value at x is positioned into the 4 least significant bits of the green value at x / 2, and a green value at x + 1 is positioned into the 4 most significant bits of the green value at x / 2.</li> <li><tt>width_bits</tt> = 2: For every x value, where x = 4k + 0, a green value at x is positioned into the 2 least significant bits of the green value at x / 4, and green values at x + 1 to x + 3 are positioned in order to the more significant bits of the green value at x / 4.</li> <li><tt>width_bits</tt> = 3: For every x value, where x = 8k + 0, a green value at x is positioned into the least significant bit of the green value at x / 8, and green values at x + 1 to x + 7 are positioned in order to the more significant bits of the green value at x / 8.</li> </ul> <t>After reading this transform, <tt>image_width</tt> is subsampled by <tt>width_bits</tt>. This affects the size of subsequent transforms. The new size can be calculated using <tt>DIV_ROUND_UP</tt>, as defined in <xref target="predictor-transform"/>.</t> <sourcecode type="c"><![CDATA[ image_width = DIV_ROUND_UP(image_width, 1 << width_bits); ]]></sourcecode> </section> </section> <section anchor="image-data" numbered="true" toc="default"> <name>Image Data</name> <t>Image data is an array of pixel values in scan-line order.</t> <section anchor="roles-of-image-data" numbered="true" toc="default"> <name>Roles of Image Data</name> <t>We use image data in five different roles:</t> <ol spacing="normal"> <li>ARGB image: Stores the actual pixels of the image.</li> <li>Entropy image: Stores the meta prefix codes (see <xref target="decoding-of-meta-prefix-codes">"Decoding of Meta Prefix Codes"</xref>).</li> <li>Predictor image: Stores the metadata for the predictor transform (see <xref target="predictor-transform">"Predictor Transform"</xref>).</li> <li>Color transform image: Created by <tt>ColorTransformElement</tt> values (defined in <xref target="color-transform">"Color Transform"</xref>) for different blocks of the image.</li> <!--[rfced] We are having some difficulty parsing the definition below. How should it be updated for clarity? Original: 5. Color indexing image: An array of size color_table_size (up to 256 ARGB values) storing the metadata for the color indexing transform (see "Color Indexing Transform" (Section 3.5.4)). Perhaps: 5. Color indexing image: An array of the size of color_table_size (up to 256 ARGB values) that stores the metadata for the color indexing transform (see "Color Indexing Transform" (Section 3.5.4)). --> <li>Color indexing image: An array of size <tt>color_table_size</tt> (up to 256 ARGB values) storing the metadata for the color indexing transform (see <xref target="color-indexing-transform">"Color Indexing Transform"</xref>).</li> </ol> </section> <section numbered="true" toc="default"> <name>Encoding of Image Data</name> <t>The encoding of image data is independent of its role.</t> <t>The image is first divided into a set of fixed-size blocks (typically 16x16 blocks). Each of these blocks are modeled using their own entropy codes. Also, several blocks may share the same entropy codes.</t> <aside><t>Rationale: Storing an entropy code incurs a cost. This cost can be minimized if statistically similar blocks share an entropy code, thereby storing that code only once. For example, an encoder can find similar blocks by clustering them using their statistical properties or by repeatedly joining a pair of randomly selected clusters when it reduces the overall amount of bits needed to encode the image.</t></aside> <t>Each pixel is encoded using one of the three possible methods:</t> <ol spacing="normal"> <li>Prefix-coded literals: Each channel (green, red, blue, and alpha) is entropy-coded independently.</li> <li>LZ77 backward reference: A sequence of pixels are copied from elsewhere in the image.</li> <li>Color cache code: Using a short multiplicative hash code (color cache index) of a recently seen color.</li> </ol> <t>The following subsections describe each of these in detail.</t> <section anchor="prefix-coded-literals" numbered="true" toc="default"> <name>Prefix-Coded Literals</name> <t>The pixel is stored as prefix-coded values of green, red, blue, and alpha (in that order). See <xref target="decoding-entropy-coded-image-data"/> for details.</t> </section> <section anchor="lz77-backward-reference" numbered="true" toc="default"> <name>LZ77 Backward Reference</name> <t>Backward references are tuples of <em>length</em> and <em>distance code</em>:</t> <ul spacing="normal"> <li>Length indicates how many pixels in scan-line order are to be copied.</li> <li>Distance code is a number indicating the position of a previously seen pixel, from which the pixels are to be copied. The exact mapping is described <xref target="distance-mapping">below</xref>.</li> </ul> <t>The length and distance values are stored using <strong>LZ77 prefix coding</strong>.</t> <t>LZ77 prefix coding divides large integer values into two parts: the <em>prefix code</em> and the <em>extra bits</em>. The prefix code is stored using an entropy code, while the extra bits are stored as they are (without an entropy code).</t> <aside><t>Rationale: This approach reduces the storage requirement for the entropy code. Also, large values are usually rare, so extra bits would be used for very few values in the image. Thus, this approach results in better compression overall.</t></aside> <t>The following table denotes the prefix codes and extra bits used for storing different ranges of values.</t> <t>Note: The maximum backward reference length is limited to 4096. Hence, only the first 24 prefix codes (with the respective extra bits) are meaningful for length values. For distance values, however, all the 40 prefix codes are valid.</t> <table align="left"> <thead> <tr> <th>Value Range</th> <th>Prefix Code</th> <th>Extra Bits</th> </tr> </thead> <tbody> <tr> <td>1</td> <td>0</td> <td>0</td> </tr> <tr> <td>2</td> <td>1</td> <td>0</td> </tr> <tr> <td>3</td> <td>2</td> <td>0</td> </tr> <tr> <td>4</td> <td>3</td> <td>0</td> </tr> <tr> <td>5..6</td> <td>4</td> <td>1</td> </tr> <tr> <td>7..8</td> <td>5</td> <td>1</td> </tr> <tr> <td>9..12</td> <td>6</td> <td>2</td> </tr> <tr> <td>13..16</td> <td>7</td> <td>2</td> </tr> <tr> <td>...</td> <td>...</td> <td>...</td> </tr> <tr> <td>3072..4096</td> <td>23</td> <td>10</td> </tr> <tr> <td>...</td> <td>...</td> <td>...</td> </tr> <tr> <td>524289..786432</td> <td>38</td> <td>18</td> </tr> <tr> <td>786433..1048576</td> <td>39</td> <td>18</td> </tr> </tbody> </table> <t>The pseudocode to obtain a (length or distance) value from the prefix code is as follows:</t> <sourcecode type="c"><![CDATA[ if (prefix_code < 4) { return prefix_code + 1; } int extra_bits = (prefix_code - 2) >> 1; int offset = (2 + (prefix_code & 1)) << extra_bits; return offset + ReadBits(extra_bits) + 1; ]]></sourcecode> <section anchor="distance-mapping"> <name>Distance Mapping</name> <t>As noted previously, a distance code is a number indicating the position of a previously seen pixel, from which the pixels are to be copied. This subsection defines the mapping between a distance code and the position of a previous pixel.</t> <t>Distance codes larger than 120 denote the pixel distance in scan-line order, offset by 120.</t> <t>The smallest distance codes [1..120] are special and are reserved for a close neighborhood of the current pixel. This neighborhood consists of 120 pixels:</t> <ul spacing="normal"> <li>Pixels that are 1 to 7 rows above the current pixel and are up to 8 columns to the left or up to 7 columns to the right of the current pixel [Total such pixels = <tt>7 * (8 + 1 + 7) = 112</tt>].</li> <li>Pixels that are in the same row as the current pixel and are up to 8 columns to the left of the current pixel [<tt>8</tt> such pixels].</li> </ul> <t>The mapping between distance code <tt>distance_code</tt> and the neighboring pixel offset <tt>(xi, yi)</tt> is as follows:</t> <figure> <artwork name="" type="ascii-art" align="left" alt=""><![CDATA[ (0, 1), (1, 0), (1, 1), (-1, 1), (0, 2), (2, 0), (1, 2), (-1, 2), (2, 1), (-2, 1), (2, 2), (-2, 2), (0, 3), (3, 0), (1, 3), (-1, 3), (3, 1), (-3, 1), (2, 3), (-2, 3), (3, 2), (-3, 2), (0, 4), (4, 0), (1, 4), (-1, 4), (4, 1), (-4, 1), (3, 3), (-3, 3), (2, 4), (-2, 4), (4, 2), (-4, 2), (0, 5), (3, 4), (-3, 4), (4, 3), (-4, 3), (5, 0), (1, 5), (-1, 5), (5, 1), (-5, 1), (2, 5), (-2, 5), (5, 2), (-5, 2), (4, 4), (-4, 4), (3, 5), (-3, 5), (5, 3), (-5, 3), (0, 6), (6, 0), (1, 6), (-1, 6), (6, 1), (-6, 1), (2, 6), (-2, 6), (6, 2), (-6, 2), (4, 5), (-4, 5), (5, 4), (-5, 4), (3, 6), (-3, 6), (6, 3), (-6, 3), (0, 7), (7, 0), (1, 7), (-1, 7), (5, 5), (-5, 5), (7, 1), (-7, 1), (4, 6), (-4, 6), (6, 4), (-6, 4), (2, 7), (-2, 7), (7, 2), (-7, 2), (3, 7), (-3, 7), (7, 3), (-7, 3), (5, 6), (-5, 6), (6, 5), (-6, 5), (8, 0), (4, 7), (-4, 7), (7, 4), (-7, 4), (8, 1), (8, 2), (6, 6), (-6, 6), (8, 3), (5, 7), (-5, 7), (7, 5), (-7, 5), (8, 4), (6, 7), (-6, 7), (7, 6), (-7, 6), (8, 5), (7, 7), (-7, 7), (8, 6), (8, 7) ]]></artwork> </figure> <t>For example, the distance code <tt>1</tt> indicates an offset of <tt>(0, 1)</tt> for the neighboring pixel, that is, the pixel above the current pixel (0 pixel difference in the X direction and 1 pixel difference in the Y direction). Similarly, the distance code <tt>3</tt> indicates the top-left pixel.</t> <t>The decoder can convert a distance code <tt>distance_code</tt> to a scan-line order distance <tt>dist</tt> as follows:</t> <sourcecode type="pseudocode"><![CDATA[ (xi, yi) = distance_map[distance_code - 1] dist = xi + yi * image_width if (dist < 1) { dist = 1 } ]]></sourcecode> <t>where <tt>distance_map</tt> is the mapping noted above, and <tt>image_width</tt> is the width of the image in pixels.</t> </section> </section> <section anchor="color-cache-coding" numbered="true" toc="default"> <name>Color Cache Coding</name> <t>Color cache stores a set of colors that have been recently used in the image.</t> <aside><t>Rationale: This way, the recently used colors can sometimes be referred to more efficiently than emitting them using the other two methods(described(as described in Sections <xref target="prefix-coded-literals" format="counter"/> and <xref target="lz77-backward-reference" format="counter"/>).</t></aside> <t>Color cache codes are stored as follows. First, there is a 1-bit value that indicates if the color cache is used. If this bit is 0, no color cache codes exist, and they are not transmitted in the prefix code that decodes the green symbols and the length prefix codes. However, if this bit is 1, the color cache size is read next:</t> <sourcecode type="c"><![CDATA[ int color_cache_code_bits = ReadBits(4); int color_cache_size = 1 << color_cache_code_bits; ]]></sourcecode> <t><tt>color_cache_code_bits</tt> defines the size of the color cache (<tt>1 << color_cache_code_bits</tt>). The range of allowed values for <tt>color_cache_code_bits</tt> is [1..11]. Compliant decoders <bcp14>MUST</bcp14> indicate a corrupted bitstream for other values.</t> <t>A color cache is an array of size <tt>color_cache_size</tt>. Each entry stores one ARGB color. Colors are looked up by indexing them by <tt>(0x1e35a7bd * color) >> (32 - color_cache_code_bits)</tt>. Only one lookup is done in a color cache; there is no conflict resolution.</t> <t>In the beginning of decoding or encoding of an image, all entries in all color cache values are set to zero. The color cache code is converted to this color at decoding time. The state of the color cache is maintained by inserting every pixel, be it produced by backward referencing or as literals, into the cache in the order they appear in the stream.</t> </section> </section> </section> <section numbered="true" toc="default"> <name>Entropy Code</name> <section numbered="true" toc="default"> <name>Overview</name> <t>Most of the data is coded using a <xref target="Huffman">canonical prefix code</xref>. Hence, the codes are transmitted by sending the <em>prefix code lengths</em>, as opposed to the actual <em>prefix codes</em>.</t> <t>In particular, the format uses <strong>spatially variant prefix coding</strong>. In other words, different blocks of the image can potentially use different entropy codes.</t> <aside><t>Rationale: Different areas of the image may have different characteristics. So, allowing them to use different entropy codes provides more flexibility and potentially better compression.</t> </aside> </section> <section numbered="true" toc="default"> <name>Details</name> <t>The encoded image data consists of several parts:</t> <ol spacing="normal"> <li>Decoding and building the prefix codes.</li> <li>Meta prefix codes.</li> <li>Entropy-coded image data.</li> </ol> <t>For any given pixel (x, y), there is a set of five prefix codes associated with it. These codes are (in bitstream order):</t><ul<dl newline="false" spacing="normal"><li><strong>Prefix<dt><strong>Prefix code#1</strong>: Used#1</strong>:</dt> <dd>Used for green channel, backward-reference length, and colorcache.</li> <li><strong>Prefixcache.</dd> <dt><strong>Prefix code #2, #3, and#4</strong>: Used#4</strong>:</dt> <dd>Used for red, blue, and alpha channels,respectively.</li> <li><strong>Prefixrespectively.</dd> <dt><strong>Prefix code#5</strong>: Used#5</strong>:</dt> <dd>Used for backward-referencedistance.</li> </ul>distance.</dd> </dl> <t>From here on, we refer to this set as a <strong>prefix code group</strong>.</t> <section anchor="decoding-and-building-the-prefix-codes" numbered="true" toc="default"> <name>Decoding and Building the Prefix Codes</name> <t>This section describes how to read the prefix code lengths from the bitstream.</t> <t>The prefix code lengths can be coded in two ways. The method used is specified by a 1-bit value.</t> <ul spacing="normal"> <li>If this bit is 1, it is a <em>simple code length code</em>.</li> <li>If this bit is 0, it is a <em>normal code length code</em>.</li> </ul> <t>In both cases, there can be unused code lengths that are still part of the stream. This may be inefficient, but it is allowed by the format. The described tree must be a complete binary tree. A single leaf node is considered a complete binary tree and can be encoded using either the simple code length code or the normal code length code. When coding a single leaf node using the <em>normal code length code</em>, all but one code length are zeros, and the single leaf node value is marked with the length of 1 -- even when no bits are consumed when that single leaf node tree is used.</t> <section anchor="simple-code-length"> <name>Simple Code Length Code</name> <t>This variant is used in the special case when only 1 or 2 prefix symbols are in the range [0..255] with code length <tt>1</tt>. All other prefix code lengths are implicitly zeros.</t> <t>The first bit indicates the number of symbols:</t> <sourcecode type="c"><![CDATA[ int num_symbols = ReadBits(1) + 1; ]]></sourcecode> <t>The following are the symbol values. This first symbol is coded using 1 or 8 bits, depending on the value of <tt>is_first_8bits</tt>. The range is [0..1] or [0..255], respectively. The second symbol, if present, is always assumed to be in the range [0..255] and coded using 8 bits.</t> <sourcecode type="c"><![CDATA[ int is_first_8bits = ReadBits(1); symbol0 = ReadBits(1 + 7 * is_first_8bits); code_lengths[symbol0] = 1; if (num_symbols == 2) { symbol1 = ReadBits(8); code_lengths[symbol1] = 1; } ]]></sourcecode><aside><t>The<aside><t>Note: The two symbols should be different. Duplicate symbols areallowed,allowed but inefficient.</t></aside> <t>Note: Another special case is when <em>all</em> prefix code lengths are <em>zeros</em> (an empty prefix code). For example, a prefix code for distance can be empty if there are no backward references. Similarly, prefix codes for alpha, red, and blue can be empty if all pixels within the same meta prefix code are produced using the color cache. However, this case doesn't need special handling, as empty prefix codes can be coded as those containing a single symbol <tt>0</tt>.</t> </section> <section anchor="normal-code-length"> <name>Normal Code Length Code</name> <t>The code lengths of the prefix code fit in 8 bits and are read as follows. First, <tt>num_code_lengths</tt> specifies the number of code lengths.</t> <sourcecode type="c"><![CDATA[ int num_code_lengths = 4 + ReadBits(4); ]]></sourcecode> <t>The code lengths are themselves encoded using prefix codes; lower-level code lengths, i.e., <tt>code_length_code_lengths</tt>, first have to be read. The rest of those <tt>code_length_code_lengths</tt> (according to the order in <tt>kCodeLengthCodeOrder</tt>) are zeros.</t> <sourcecode type="c"><![CDATA[ int kCodeLengthCodes = 19; int kCodeLengthCodeOrder[kCodeLengthCodes] = { 17, 18, 0, 1, 2, 3, 4, 5, 16, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 }; int code_length_code_lengths[kCodeLengthCodes] = { 0 }; // All zeros for (i = 0; i < num_code_lengths; ++i) { code_length_code_lengths[kCodeLengthCodeOrder[i]] = ReadBits(3); } ]]></sourcecode> <t>Next, if <tt>ReadBits(1) == 0</tt>, the maximum number of different read symbols (<tt>max_symbol</tt>) for each symbol type (A, R, G, B, and distance) is set to its alphabet size:</t> <ul spacing="normal"> <li>G channel: 256 + 24 + <tt>color_cache_size</tt></li> <li>Other literals (A, R, and B): 256</li> <li>Distance code: 40</li> </ul> <t>Otherwise, it is defined as:</t> <sourcecode type="c"><![CDATA[ int length_nbits = 2 + 2 * ReadBits(3); int max_symbol = 2 + ReadBits(length_nbits); ]]></sourcecode> <t>If <tt>max_symbol</tt> is larger than the size of the alphabet for the symbol type, the bitstream is invalid.</t> <t>A prefix table is then built from <tt>code_length_code_lengths</tt> and used to read up to <tt>max_symbol</tt> code lengths.</t> <ul spacing="normal"> <li><t>Code [0..15] indicates literal code lengths.</t> <ul spacing="normal"> <li>Value 0 means no symbols have been coded.</li> <li>Values [1..15] indicate the bit length of the respective code.</li> </ul> </li> <li>Code 16 repeats the previous nonzero value [3..6] times, that is, <tt>3 + ReadBits(2)</tt> times. If code 16 is used before a nonzero value has been emitted, a value of 8 is repeated.</li> <li>Code 17 emits a streak of zeros of length [3..10], that is, <tt>3 + ReadBits(3)</tt> times.</li> <li>Code 18 emits a streak of zeros of length [11..138], that is, <tt>11 + ReadBits(7)</tt> times.</li> </ul> <t>Once code lengths are read, a prefix code for each symbol type (A, R, G, B, and distance) is formed using their respective alphabet sizes.</t> </section> </section> <section anchor="decoding-of-meta-prefix-codes" numbered="true" toc="default"> <name>Decoding of Meta Prefix Codes</name> <t>As noted earlier, the format allows the use of different prefix codes for different blocks of the image. <em>Meta prefix codes</em> are indexes identifying which prefix codes to use in different parts of the image.</t> <t>Meta prefix codes may be used <em>only</em> when the image is being used in the <xref target="roles-of-image-data">role</xref> of an <em>ARGB image</em>.</t> <t>There are two possibilities for the meta prefix codes, indicated by a 1-bit value:</t> <ul spacing="normal"> <li>If this bit is zero, there is only one meta prefix code used everywhere in the image. No more data is stored.</li> <li>If this bit is one, the image uses multiple meta prefix codes. These meta prefix codes are stored as an <em>entropy image</em> (described below).</li> </ul> <t>The red and green components of a pixel define a 16-bit meta prefix code used in a particular block of the ARGB image.</t> <section anchor="entropy-image"> <name>Entropy Image</name> <t>The entropy image defines which prefix codes are used in different parts of the image.</t> <t>The first 3 bits contain the <tt>prefix_bits</tt> value. The dimensions of the entropy image are derived from <tt>prefix_bits</tt>:</t> <sourcecode type="c"><![CDATA[ int prefix_bits = ReadBits(3) + 2; int prefix_image_width = DIV_ROUND_UP(image_width, 1 << prefix_bits); int prefix_image_height = DIV_ROUND_UP(image_height, 1 << prefix_bits); ]]></sourcecode> <t>where <tt>DIV_ROUND_UP</tt> is as defined in <xref target="predictor-transform"/>.</t> <t>The next bits contain an entropy image of width <tt>prefix_image_width</tt> and height <tt>prefix_image_height</tt>.</t> </section> <section anchor="interp-meta-prefix-codes"> <name>Interpretation of Meta Prefix Codes</name> <t>The number of prefix code groups in the ARGB image can be obtained by finding the <em>largest meta prefix code</em> from the entropy image:</t> <sourcecode type="c"><![CDATA[ int num_prefix_groups = max(entropy image) + 1; ]]></sourcecode> <t>where <tt>max(entropy image)</tt> indicates the largest prefix code stored in the entropy image.</t> <t>As each prefix code group contains five prefix codes, the total number of prefix codes is:</t> <sourcecode type="c"><![CDATA[ int num_prefix_codes = 5 * num_prefix_groups; ]]></sourcecode> <t>Given a pixel (x, y) in the ARGB image, we can obtain the corresponding prefix codes to be used as follows:</t> <sourcecode type="c"><![CDATA[ int position = (y >> prefix_bits) * prefix_image_width + (x >> prefix_bits); int meta_prefix_code = (entropy_image[position] >> 8) & 0xffff; PrefixCodeGroup prefix_group = prefix_code_groups[meta_prefix_code]; ]]></sourcecode> <t>where we have assumed the existence of the <tt>PrefixCodeGroup</tt> structure, which represents a set of five prefix codes. Also, <tt>prefix_code_groups</tt> is an array of <tt>PrefixCodeGroup</tt> (of size <tt>num_prefix_groups</tt>).</t> <t>The decoder then uses prefix code group <tt>prefix_group</tt> to decode the pixel (x, y), as explained in <xref target="decoding-entropy-coded-image-data"/>.</t> </section> </section> <section anchor="decoding-entropy-coded-image-data" numbered="true" toc="default"> <name>Decoding Entropy-Coded Image Data</name> <t>For the current position (x, y) in the image, the decoder first identifies the corresponding prefix code group (as explained in the last section). Given the prefix code group, the pixel is read and decoded as follows.</t> <!-- [rfced] May we move the citation out of the equation below? Original: Note that S is any integer in the range 0 to (256 + 24 + color_cache_size (Section 3.6.2.3)- 1). Perhaps: Note that S is any integer in the range 0 to (256 + 24 + color_cache_size - 1). See Section 3.6.2.3 for details about color_cache_size. --> <t>Next, read symbol S from the bitstream using prefix code #1. Note that S is any integer in the range <tt>0</tt> to <tt>(256 + 24 + </tt> <xref target="color-cache-coding"><tt>color_cache_size</tt></xref><tt> - 1)</tt>.</t> <t>The interpretation of S depends on its value:</t> <ol spacing="normal" type="1"> <li><t>If S <256</t>256:</t> <ol spacing="normal" type="i"> <li>Use S as the green component.</li> <li>Read red from the bitstream using prefix code #2.</li> <li>Read blue from the bitstream using prefix code #3.</li> <li>Read alpha from the bitstream using prefix code #4.</li> </ol> </li> <li><t>If S >= 256 & S < 256 +24</t>24:</t> <ol spacing="normal" type="i"> <li>Use S - 256 as a length prefix code.</li> <li>Read extra bits for the length from the bitstream.</li> <li>Determine backward-reference length L from length prefix code and the extra bits read.</li> <li>Read the distance prefix code from the bitstream using prefix code #5.</li> <li>Read extra bits for the distance from the bitstream.</li> <li>Determine backward-reference distance D from the distance prefix code and the extra bits read.</li> <li>Copy L pixels (in scan-line order) from the sequence ofpixelspixels, starting at the current position minus D pixels.</li> </ol> </li> <li><t>If S >= 256 +24</t>24:</t> <ol spacing="normal" type="i"> <li>Use S - (256 + 24) as the index into the color cache.</li> <li>Get ARGB color from the color cache at that index.</li> </ol> </li> </ol> </section> </section> </section> <section numbered="true" toc="default"> <name>Overall Structure of the Format</name> <t>Below is a view into the format in Augmented Backus-Naur Form <xref target="RFC5234"/> <xref target="RFC7405"/>. It does not cover all details. The end-of-image (EOI) is only implicitly coded into the number of pixels (image_width * image_height).</t> <t>Note that <tt>*element</tt> means <tt>element</tt> can be repeated 0 or more times. <tt>5element</tt> means <tt>element</tt> is repeated exactly 5 times. <tt>%b</tt> represents a binary value.</t> <section numbered="true" toc="default"> <name>Basic Structure</name> <sourcecode type="abnf"><![CDATA[ format = RIFF-header image-header image-stream RIFF-header = %s"RIFF" 4OCTET %s"WEBPVP8L" 4OCTET image-header = %x2F image-size alpha-is-used version image-size = 14BIT 14BIT ; width - 1, height - 1 alpha-is-used = 1BIT version = 3BIT ; 0 image-stream = optional-transform spatially-coded-image ]]></sourcecode> </section> <section numbered="true" toc="default"> <name>Structure of Transforms</name> <sourcecode type="abnf"><![CDATA[ optional-transform = (%b1 transform optional-transform) / %b0 transform = predictor-tx / color-tx / subtract-green-tx transform =/ color-indexing-tx predictor-tx = %b00 predictor-image predictor-image = 3BIT ; sub-pixel code entropy-coded-image color-tx = %b01 color-image color-image = 3BIT ; sub-pixel code entropy-coded-image subtract-green-tx = %b10 color-indexing-tx = %b11 color-indexing-image color-indexing-image = 8BIT ; color count entropy-coded-image ]]></sourcecode> </section> <section numbered="true" toc="default"> <name>Structure of the Image Data</name> <sourcecode type="abnf"><![CDATA[ spatially-coded-image = color-cache-info meta-prefix data entropy-coded-image = color-cache-info data color-cache-info = %b0 color-cache-info =/ (%b1 4BIT) ; 1 followed by color cache size meta-prefix = %b0 / (%b1 entropy-image) data = prefix-codes lz77-coded-image entropy-image = 3BIT ; subsample value entropy-coded-image prefix-codes = prefix-code-group *prefix-codes prefix-code-group = 5prefix-code ; See "Interpretation of Meta Prefix Codes" to ; understand what each of these five prefix ; codes are for. prefix-code = simple-prefix-code / normal-prefix-code simple-prefix-code = ; see "Simple Code Length Code" for details normal-prefix-code = ; see "Normal Code Length Code" for details lz77-coded-image = *((argb-pixel / lz77-copy / color-cache-code) lz77-coded-image) ]]></sourcecode> <t>The following is a possible example sequence:</t> <!-- [rfced] Please review the "type" attribute of each sourcecode element in the XML file to ensure correctness. The current list of preferred values for "type" is available at <https://www.rfc-editor.org/rpc/wiki/doku.php?id=sourcecode-types>. Please let us know if the "type" attribute for the sourcecode at the end of Section 3.8.3 should be set. Note that it is also acceptable to leave it not set. --> <sourcecode><![CDATA[ RIFF-header image-size %b1 subtract-green-tx %b1 predictor-tx %b0 color-cache-info %b0 prefix-codes lz77-coded-image ]]></sourcecode> </section> </section> </section> <section anchor="Security" numbered="true" toc="default"> <name>Security Considerations</name> <t>Implementations of this format face security risks, such as integer overflows, out-of-bounds reads and writes to both heap and stack, uninitialized data usage, null pointer dereferences, resource (disk or memory) exhaustion, and extended resource usage (long running time) as part of the demuxing and decoding process. In particular, implementations reading this format are likely to take input from unknown and possibly unsafe sources -- both clients (for example, web browsers or email clients) and servers (for example, applications that accept uploaded images). These may result in arbitrary code execution, information leakage (memory layout and contents), or crashes and thereby allow a device to be compromised or cause a denial of service to an application using the format <xref target="cve.mitre.org-libwebp"/> <xref target="crbug-security"/>.</t> <t>The format does not employ "active content" but does allow metadata (for example, <xref target="XMP"/> and <xref target="Exif"/>) and custom chunks to be embedded in a file. Applications that interpret these chunks may be subject to security considerations for those formats.</t> </section> <section anchor="Interop" numbered="true" toc="default"> <name>Interoperability Considerations</name> <t>The format is defined using little-endian byte ordering (see <xref target="RFC2781" section="3.1"/>), but demuxing and decoding are possible on platforms using a different ordering with the appropriate conversion. The container is based on RIFF and allows extension via user-defined chunks, but nothing beyond the chunks defined by the container format (<xref target="webp-container"/>) are required for decoding of the image. These have been finalized but were extended in the format's early stages, so some older readers may not support lossless or animated image decoding.</t> </section> <section anchor="IANA" numbered="true" toc="default"> <!-- [rfced] We have included a specific question about the IANA text below. In addition to responding to the question, please review all of the IANA-related updates carefully and let us know if any further updates are needed. a) Section 6.1.1. Per the template in Section 5.6 of RFC 6838, we ordered "Intended usage" above "Restrictions on usage". We also notice that "Provisional registration?" is missing from the list - should it be included after "Change controller" to match the template? --> <name>IANA Considerations</name> <t>IANA has registered the 'image/webp' media type <xref target="RFC2046"/>.</t> <section anchor="webp-media-type" numbered="true" toc="default"> <name>The 'image/webp' Media Type</name> <t>This section contains the media type registration details per <xref target="RFC6838"/>.</t> <section numbered="true" toc="default"> <name>Registration Details</name><!-- RFC Editor Note: Remove this text element after updating. --> <t><strong>RFC Editor Note:</strong> Replace RFC XXXX / rfcXXXX with the published RFC number.</t><dl newline="false" spacing="normal"> <dt>Type name:</dt> <dd>image</dd> <dt>Subtype name:</dt> <dd>webp</dd> <dt>Required parameters:</dt> <dd>N/A</dd> <dt>Optional parameters:</dt> <dd>N/A</dd> <dt>Encoding considerations:</dt> <dd>Binary. The <xreftarget="RFC4648">Base64target="RFC4648">base64 encoding</xref> should be used on transports that cannot accommodate binary data directly.</dd> <dt>Security considerations:</dt> <dd>See RFCXXXX,9649, <xref target="Security"/>.</dd> <dt>Interoperability considerations:</dt> <dd>See RFCXXXX,9649, <xref target="Interop"/>.</dd> <dt>Published specification:</dt> <dd>RFCXXXX</dd>9649</dd> <dt>Applications that use this media type:</dt> <dd>Applications that are used to display and process images, especially when smaller image file sizes are important.</dd> <dt>Fragment identifier considerations:</dt> <dd>N/A</dd> <dt>Additional information:</dt> <dd><t><br/></t> <dl spacing="compact"> <dt>Deprecated alias names for this type:</dt> <dd>N/A</dd> <dt>Magic number(s):</dt> <dd>The first 4 bytes are 0x52, 0x49, 0x46, 0x46 ('RIFF'), followed by 4 bytes for the 'RIFF' Chunk size. The next 7 bytes are 0x57, 0x45, 0x42, 0x50, 0x56, 0x50, 0x38 ('WEBPVP8').</dd> <dt>File extension(s):</dt> <dd>webp</dd> <dt>Apple Uniform Type Identifier:</dt> <dd>org.webmproject.webp conforms to public.image</dd> <dt>Object Identifiers:</dt> <dd>N/A</dd> </dl></dd> <dt>Person & email address to contact for further information:</dt> <dd>James Zern <jzern@google.com></dd></dl> <dl newline="false" spacing="normal"> <dt>Intended usage:</dt> <dd>COMMON</dd> <dt>Restrictions on usage:</dt> <dd>N/A</dd> <dt>Author:</dt> <dd>James Zern <jzern@google.com></dd></dl> <dl newline="false" spacing="compact"><dt>Changecontroller:</dt><dd></dd> <dt></dt><dd>IETF</dd> </dl> <dl newline="false" spacing="normal"> <dt>Intended usage:</dt> <dd>COMMON</dd>controller:</dt><dd>IETF</dd> </dl> </section> </section> </section> </middle> <back> <references> <name>References</name> <references> <name>Normative References</name> <reference anchor="Exif" target="https://www.cipa.jp/std/documents/e/DC-008-2012_E.pdf"> <front> <title>Exchangeable image file format for digital still cameras: Exif Version 2.3</title> <author> <organization>Camera & Imaging Products Association (CIPA)</organization> </author> <author> <organization>Japan Electronics and Information Technology Industries Association (JEITA)</organization> </author> <date month="December" year="2012"/> </front> <seriesInfo name="CIPA" value="DC-008-2012"/> <seriesInfo name="JEITA" value="CP-3451C"/> </reference> <reference anchor="ICC" target="https://www.color.org/specification/ICC1v43_2010-12.pdf"> <front> <title>Image technology colour management--- Architecture, profile format, and data structure</title> <author> <organization>International Color Consortium</organization> </author> <date month="December" year="2010"/> </front> <seriesInfo name="Specification" value="ICC.1:2010"/> <refcontent>Profile version 4.3.0.0, REVISION of ICC.1:2004-10</refcontent> </reference> <reference anchor="ISO.9899.2018" target="https://www.iso.org/standard/74528.html"> <front> <title>Information technology--- Programming languages--- C</title> <author> <organization> International Organization for Standardization </organization> </author> <date month="June" year="2018"/> </front> <seriesInfo name="ISO/IEC" value="9899:2018"/> <refcontent>Fourth Edition</refcontent> </reference> <reference anchor="rec601" target="https://www.itu.int/rec/R-REC-BT.601/"> <front> <title>Studio encoding parameters of digital television for standard 4:3 andwide screenwide-screen 16:9 aspect ratios</title> <author><organization>ITU</organization><organization>ITU-R</organization> </author> <date month="March" year="2011" /> </front> <seriesInfo name="ITU-R Recommendation"value="BT.601"/>value="BT.601-7"/> </reference> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.1166.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.2046.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.2119.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.2781.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.4648.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.5234.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.6386.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.6838.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.7405.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.8174.xml"/> <reference anchor="XMP" target="https://www.adobe.com/devnet/xmp.html"> <front> <title>XMP Specification</title> <author> <organization>Adobe Inc.</organization> </author> </front> </reference> </references> <references> <name>Informative References</name> <!--[rfced] The URL for the reference below redirects to the following page: https://issues.webmproject.org/issues?q=componentid:1618983%2B%20is:open Please review and let us know how the URL should be updated. Original: [crbug-security] "libwebp Security Issues", <https://bugs.chromium.org/p/webp/issues/ list?q=label%3ASecurity>. --> <reference anchor="crbug-security" target="https://bugs.chromium.org/p/webp/issues/list?q=label%3ASecurity"> <front> <title>libwebp Security Issues</title> <author> <organization/> </author> </front> </reference> <reference anchor="cve.mitre.org-libwebp" target="https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=libwebp"> <front> <title>libwebp CVE List</title> <author> <organization/> </author> </front> </reference> <reference anchor="GIF-spec" target="https://www.w3.org/Graphics/GIF/spec-gif89a.txt"> <front> <title>Graphics Interchange Format(sm)</title> <author> <organization>CompuServe Incorporated</organization> </author> <date month="July" year="1990"/> </front> <refcontent>Version 89a</refcontent> </reference> <reference anchor="Huffman"> <front> <title>A Method for the Construction of Minimum-Redundancy Codes</title> <author initials="D." surname="Huffman"> <organization/> </author> <date month="September" year="1952" /> </front> <seriesInfo name="DOI" value="10.1109/JRPROC.1952.273898"/> <refcontent>Proceedings of theInstitute of Radio Engineers, Vol.IRE, vol. 40,Issueno. 9, pp. 1098-1101</refcontent> </reference> <reference anchor="JPEG-spec" target="https://www.w3.org/Graphics/JPEG/itu-t81.pdf"> <front> <title>Information Technology - Digital Compression and Coding of Continuous-Tone Still Images - Requirements and Guidelines</title> <author> <organization/> </author> <date month="September" year="1992"/> </front> <seriesInfo name="ITU-T Recommendation" value="T.81"/> <seriesInfo name="ISO/IEC"value="10918-1"/>value="10918-1:1993(E)"/> </reference> <reference anchor="LZ77"> <front> <title>AUniversal Algorithmuniversal algorithm forSequential Data Compression</title>sequential data compression</title> <author initials="J." surname="Ziv"> <organization/> </author> <author initials="A." surname="Lempel"> <organization/> </author> <date month="May" year="1977" /> </front> <seriesInfo name="DOI" value="10.1109/TIT.1977.1055714"/> <refcontent>IEEE Transactions on Information Theory,Vol.vol. 23,Issueno. 3, pp. 337-343</refcontent> </reference> <reference anchor="MWG" target="https://web.archive.org/web/20180919181934/http://www.metadataworkinggroup.org/pdf/mwg_guidance.pdf"> <front> <title>Guidelines For Handling Image Metadata</title> <author> <organization>Metadata Working Group</organization> </author> <date month="November" year="2010"/> </front> <refcontent>Version2.0</refcontent>2.0, Wayback Machine archive</refcontent> </reference> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.2083.xml"/> <reference anchor="RIFF-spec" target="https://www.loc.gov/preservation/digital/formats/fdd/fdd000025.shtml"> <front> <title>RIFF (Resource Interchange File Format)</title> <author> <organization/> </author> </front> <refcontent>From the Library of Congress, Sustainability of Digital Formats</refcontent> </reference> <!--[rfced] We have made some updates to the text. Please ensure that the source documents listed below are updated to match the document accordingly. Additionally, once this document is ready for publication, we will confirm that the links work correctly. They currently lead to pages that require signing in to access. [webp-lossless-src] Alakuijala, J., "WebP Lossless Bitstream Specification", October 2023, <https://chromium.googlesource.com/webm/libwebp/+/refs/ tags/webp-rfc9649/doc/webp-lossless-bitstream-spec.txt>. [webp-riff-src] Google LLC, "WebP RIFF Container", April 2024, <https://chromium.googlesource.com/webm/libwebp/+/refs/ tags/webp-rfc9649/doc/webp-container-spec.txt>. --> <reference anchor="webp-lossless-src"target="https://chromium.googlesource.com/webm/libwebp/+/refs/tags/webp-rfcXXXX/doc/webp-lossless-bitstream-spec.txt">target="https://chromium.googlesource.com/webm/libwebp/+/refs/tags/webp-rfc9649/doc/webp-lossless-bitstream-spec.txt"> <front> <title>WebP Lossless Bitstream Specification</title> <author initials="J." surname="Alakuijala" fullname="Jyrki Alakuijala"> <organization>Google LLC</organization> </author> <date month="October" year="2023" /> </front> </reference> <reference anchor="webp-lossless-study" target="https://developers.google.com/speed/webp/docs/webp_lossless_alpha_study"> <front> <title>Lossless and Transparency Encoding in WebP</title> <author initials="J." surname="Alakuijala" fullname="Jyrki Alakuijala"> <organization>Google LLC</organization> </author> <author initials="V." surname="Rabaud" fullname="Vincent Rabaud"> <organization>Google LLC</organization> </author> <date month="August" year="2017" /> </front> <refcontent>Google LLC</refcontent> </reference> <reference anchor="webp-riff-src"target="https://chromium.googlesource.com/webm/libwebp/+/refs/tags/webp-rfcXXXX/doc/webp-container-spec.txt">target="https://chromium.googlesource.com/webm/libwebp/+/refs/tags/webp-rfc9649/doc/webp-container-spec.txt"> <front> <title>WebP RIFF Container</title> <author> <organization>Google LLC</organization> </author> <date month="April" year="2024" /> </front> </reference> </references> </references> <!-- [rfced] Please review the "Inclusive Language" portion of the online Style Guide <https://www.rfc-editor.org/styleguide/part2/#inclusive_language> and let us know if any changes are needed. Note that our script did not flag any words in particular, but this should still be reviewed as a best practice. --> </back> </rfc>